Home > Honeywell > Security system > Honeywell Ce3 Code Encryptor 3 Manual

Honeywell Ce3 Code Encryptor 3 Manual

Add to Favourites
    Download as PDF

    View the Honeywell Ce3 Code Encryptor 3 Manual for free. All the Honeywell manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 800-04965 8/09 Rev. A ADEMCO CE3 Code Encryptor 3 INSTALLATION AND SETUP GUIDE GENERAL INFORMATION The Code Encryptor 3 (CE3) provides wireless control for arming/disarming a security system, opening/closing a garage door, and activating a relay output (ex. turning on a light). The CE3 consists of a Receiver and wiring harness, remote control keyfob, and a status LED with optional mounting plate. The most important factor for range and reliability is the mounting location of the Receiver....
    Page 2 – 2 – PROGRAMMING THE CODE ENCRYPTOR 3 Programming involves first associating the module with the control with which it is being used (auto recognition), and then programming the remote control’s user code. Automatic Recognition 1. Make sure the alarm panel is powered up and operating. The wire harness should still be disconnected from the Receiver. 2. While watching the LED light on the CE3 Receiver, plug the wire harness connector into the Receiver. 3. The Receiver’s LED will blink...
    Page 3 – 3 – WIRING FOR OPTIONAL FEATURES AND APPLICATIONS Summary of Harness Wire Functions Purpose Wire Color Function Red Keypad Red or Aux (+12VDC) Black Keypad Black or Aux (–) Green Keypad Green (control Data In); Not Used on GE Caddx NX panels Keypad Connections Yellow Keypad Yellow (control Data Out) Purple LED Status Light Purple wire (Red light) LED Status White/Purple LED Status Light white/purple (Green light) Blue/Green Channel 4 N/C (5amp) Brown/White Channel 4 N/O (5amp) Relay...
    Page 4 Deactivating Panic Mode In the event the user does not want to access a panic button through the remote control, it can be deactivated from the Code Encryptor 3’s memory. 1. Unplug the wire harness from the Code Encryptor 3. 2. Press and HOLD the program button. 3. While HOLDING the program button, plug the CE 3 harness back in. The LED located on the front will turn ON. 4. Wait until the LED turns “OFF”. 5. Once the LED has turned “OFF” release the button. Auto recognition will start....
    Start reading Honeywell Ce3 Code Encryptor 3 Manual

    Related Manuals for Honeywell Ce3 Code Encryptor 3 Manual

    All Honeywell manuals