Honeywell C1 Autopilot Manual

 5 
Connect
Connect to Wi-Fi
Be sure you are on the same Wi-Fi network you 
wish to connect your camera to.
1 Choose your Wi-Fi network from the list.  
Press NEXT.
2 Enter your Wi-Fi password, if necessary.  
Press DONE.
Note: The camera will beep during some steps in 
this process.
Connect to mobile device
1 Enable bluetooth on your mobile device.
2 The app will look for the camera. •  For one camera, it will connect 
automatically.
•  For more than one camera, the app will 
prompt you to select one...

  6
Status LEDs
During Wi-Fi connection and camera operation, the LED shows the status of 
the camera.
LEDCamera state
During installation
Blinking Blue Powered up. Ready to begin setup. 
If the LED blinks blue during setup, it has lost 
bluetooth connection. Unplug it and plug it back in 
again. See “Connect the power cord” on page 4 
for instructions.
Solid Blue Connected to App. Ready to complete setup.
Solid Red (for 
2 seconds) Setup timed out, or connection failed. The LED will 
then turn solid...

 7 
Operation
Remove/replace the stand
The C1 Camera stand is connected to the camera by a magnet. If you want 
to remove the stand to hang the camera on the wall or replace the SD card, 
simply pull the stand off of the camera. To replace, just snap it back on the 
camera.
Lyric app experience
When you launch the application, live video from your 
camera is displayed.
If you have multiple cameras, a list of them is displayed. 
Select a camera from the list to view live video from that 
camera.
Reset
If...

  8
App overview
These are the controls available during livestream.Camera on/off
Press to turn the   
camera on or off. Motion/sound detector
Press to turn the motion or 
sound detection alerts on or 
off during livestream.
Snapshot control
Press to take pictures during 
livestream. Images are saved 
to mobile device’s photos.
Video clips
When the camera detects motion or sound, it records 
a clip. Those clips are listed in chronological order 
here. Swipe up to see the list of clips, then swipe up or...

 9 
Livestreaming
You can use your security camera to get a live look-in wherever 
you place the camera. Each livestream session lasts 90 
seconds. When one livestream session ends, you can start a 
new one if you like.
Use the Push to Talk button to talk to someone through the 
camera.
Livestreams are not saved to the SD card, and are not 
uploaded to your cloud storage.
By default, livestreams are in HD. If data limits are a concern, 
change this setting to Auto or Low. See “Video quality” on 
page 13. 

  10
Configure alerts
When the camera detects a sound or 
motion, it sends an alert to the app.
1 Press the Alerts icon when a red bubble 
appears.
2 The Alerts are displayed with the Alert 
type and the date/time stamp.
3 Press an alert to view the 30-second 
video clip.
4 Swipe left, then press Dismiss to remove 
the Alert.
5 To dismiss all Alerts, press Edit, then 
press DISMISS ALL.
Select alert notification type
1 Press the side menu button on the home 
screen.
2 Press Alerts and Notifications.
3...

 11 
Select alert recipients
You can choose multiple people to have access to the camera and receive Alerts.
1 Press the side menu button on the home 
screen.
2 Press Manage Users.
3 Press Add User at the bottom of the 
app.
4 Enter the email address of the person 
you want to add to the camera then 
press SEND.
Review clips
1 Swipe up from the bottom of the home 
screen to show clips.
2 Press a clip to watch it.
3 Press FILTER to sort the clips, then 
select a filter type (All, New, Viewed, 
Downloaded).  

  12
Camera settings
Camera settings can be controlled in the app. You can set up things like night mode, use 
Lyric’s Geofencing capability, and turn on Motion or Sound Detection, and other settings.
1 Press the side menu button on the 
home screen.
2 Press the camera you want to change 
the settings on. Look for the name you 
gave the camera when installed.
3 To change the camera mode, press 
Camera Mode.
4 Press a setting for the camera mode:•  Manual - turn the camera on or off 
using the app.
•...

 13 
Video quality
You can change the quality of your video stream. This will help limit data use on your 
mobile device.
1 Press the side menu button on the 
home screen.
2 Press the camera you want to change 
the settings on. Look for the name you 
gave the camera when installed.
3 Press Video Quality.
4 Press a setting for video quality:
•  Auto - the camera adjusts its 
settings automatically.
•  Low - lower quality video that uses 
less data or bandwidth (VGA).
•  High - higher quality video that...

  14
Turn the LED on and off
If you want to turn the camera’s LED off (or back on), it is easy to do using the app.
1 Press the side menu button on the 
home screen.
2 Press the camera you want to change 
the settings on. Look for the name you 
gave the camera when installed.
3 Use the Camera LED switch to turn the 
LED on or off.
Turn the microphone on and off
If you want to turn the camera’s 
microphone off (or back on), it is easy to 
do using the app.
1 Press the side menu button on the 
home...