Honeywell 1900gsr 2 User Manual

Xenon/Granit User Guide 321
Granit 1910i/1911i Scanner Guaranteed Performance 
Granit 1980i/1981i Scanner Typical Performance (200 lux) 
Focus Extended Range (ER)
Symbology Near DistanceFar Distance
5 mil Code 39 in. 3.8 7.2
mm 96.5 182.9
20 mil Code 39 in. 1 28.7
mm 25.4 729
100% UPC in. .6 21.7
mm 15.2 551.2
6.7 mil PDF417 in. 3 8.5
mm 76.2 215.9
10 mil Data Matrix in. 3.1 9.7
mm 78.7 246.4
20 mil QR Code in. .9 19.8
mm 22.9 502.9
Resolution (1D Code 39) 5 mil (.127mm)
Resolution (2D Data Matrix) 7.5...

322 Xenon/Granit User Guide
Granit 1980i/1981i Scanner Guaranteed Performance (200 lux)
10 mil Data Matrix in. 3.9 40.3
cm 10.0 102.3
55 mil Data Matrix in.  16.9 232.8
cm 42.8 591.3
100 mil Data Matrix in. 31.8 406.5
cm 80.7 1032.5
Resolution (1D Code 39) 2 mil (.051mm)
Resolution (2D Data Matrix) 2 mil (.051mm)
Focus  (Continued)Full Range (FR)
Symbology  (Continued)Near DistanceFar Distance
Focus Full Range (FR)
Symbology Near DistanceFar Distance
7.5 mil Code 39 in. 3.9 62.4
cm 10.0 158.6
10 mil Code...

Xenon/Granit User Guide 323
Granit 1920i Typical Performance 
Granit 1920i Guaranteed Performance 
Focus 
Symbology Near DistanceFar Distance
3 mil Code 39 in. 0 2.5
mm 0 64
5 mil Code 39 in. 0 3.5
mm 0 89
100% UPC in. 0 5.8
mm 0 147
5 mil PDF417 in. 0 2.6
mm 0 66
5 mil Data Matrix in. 0 1.5
mm 0 39
20 mil QR Code in. 0 6.4
mm 0 162
Resolution (1D Code 39) 2.5 mil (0.063mm)
Resolution (2D Data Matrix) 4 mil (0.102mm)
Focus 
Symbology Near DistanceFar Distance
3 mil Code 39 in. 0.2 2.2
mm 5 55
5 mil Code...

324 Xenon/Granit User Guide
Standard Connector Pinouts
Note:The following pin assignments are not compatible with Honeywell legacy products. 
Use of a cable with improper pin assignments may lead to damage to the unit. Use of 
any cables not provided by the manufacturer may result in damage not covered by 
your warranty. 
Keyboard Wedge
10 Pin RJ41 Modular Plug - connects to the base
Serial Output
10 Pin RJ41 Modular Plug - connects to the base 
1 Cable shield
2Cable select
3 Supply ground
4 Terminal...

Xenon/Granit User Guide 325
RS485 Output
10 Pin RJ41 Modular Plug - connects to the base
Note:RS485 signal conversion is performed in the cable. 
USB
10 Pin Modular Plug - connects to the base
1 Cable shield
2Cable select
3 Supply ground
4 Transmit data
5 Receive data - serial data to scanner
6
7 +5V power
8 Transmit Enable
9
10
1 Cable shield
2Cable select
3 Supply ground
4
5
6
7 +5V power
8
9 Data +
10 Data - 

326 Xenon/Granit User Guide
Required Safety Labels
Xenon 1900/1902 Scanner
Compliance 
Label location Part 
Number, 
Serial Number 
and Revision 
Information
location
Illumination output
LASER LIGHT- DO NOT STARE INTO BEAM  CLASS 2 LASER PRODUCT. REGARDER DANS LE FAISCEAU.  APPAREIL À LASER DE CLASSE 2. MAX. 1mW:
630-680 nm 
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.  IEC 60825-1:2007. Complies with 21 CFR 1040.10 and 1040.11...

Xenon/Granit User Guide 327
CCB01-010BT/CCB01-010BT-BF Base
Part Number,
Serial
Number and 
Revision 
Information 
location
Compliance Label 
locations 

328 Xenon/Granit User Guide
Granit 1910i/1911i/1920i/1980i/1981i Scanner
Laser Label 
location
Illumination 
output
Part Number, Serial 
Number and 
Revision 
Information locationCompliance 
label location
LASER LIGHT- DO NOT STARE INTO BEAM  CLASS 2 LASER PRODUCT. REGARDER DANS LE FAISCEAU.  APPAREIL À LASER DE CLASSE 2. MAX. 1mW:
630-680 nm 
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.  IEC 60825-1:2007. Complies with 21 CFR 1040.10 and 1040.11...

Xenon/Granit User Guide 329
CCB02-100BT/CCB05-100BT Base
Compliance 
Label locations 

330 Xenon/Granit User Guide