Home > Honda > Engines > Honda Engines GCV160, GCV190 Instructions Manual

Honda Engines GCV160, GCV190 Instructions Manual

Add to Favourites
    Download as PDF

    View the Honda Engines GCV160, GCV190 Instructions Manual for free. All the Honda manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 1E INTRODUCTION Thank you for purchasing a Honda engine. We want to help you to get the best results from your new engi ne and to operate it safely. This manual contains information on how to do that; please read it carefully before operating the engine. If a prob lem should arise, or if you have any questions about your engine, consult an authorized Honda servicing dealer. All information in this publication is based on the latest product information available at the time of printing. American...
    Page 2 2E COMPONENT & CONTROL LOCATION The engine control area differs based on the engine type. Refer to the individual diagrams below to determine your engine control type when reading the Operation section and other sections in the manual.BEFORE OPERATION CHECKS IS YOUR ENGINE READY TO GO? For your safety, and to maximize the service life of your equipment, it is very important to take a few moments before you operate the engine to check its condition. Be sure to take care of any problem you find, or...
    Page 3 3E 2. See equipment manual and position the throttle control so the choke/throttle lever moves to the CHOKE position. 3. See equipment manual and position the flywheel brake control so the flywheel brake lever is in the RUN position. 4. Pull the starter grip lightly until resistance is felt, then pull briskly. NOTICE Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter. 5. If the choke was used to start the engine, move the...
    Page 4 4E Starting A Warm Engine 1. Move the flywheel brake lever to the RUN position. 2. Pull the starter grip lightly until resistance is felt, then pull briskly (see page 3). Stopping The Engine 1. Release the flywheel brake lever to stop the engine. 2. Turn the fuel valve to the OFF position (see page 2). TYPE 4 (AUTOMATIC CHOKE RETURN/FIXED THROTTLE) Starting A Cold Engine 1. Turn the fuel valve to the ON position (see page 2). 2. Move the choke lever to the choke position (). 3. Move the flywheel...
    Start reading Honda Engines GCV160, GCV190 Instructions Manual

    Related Manuals for Honda Engines GCV160, GCV190 Instructions Manual

    All Honda manuals