Honda Civic 5 Owners Manual

To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them in blocks of 3, 4, 7,
10, or 11.
To skip a voice prompt, press the
Talk button while the HFT system
is speaking. The HFT system will
then begin listening f or your next
command. If the HFT system does not
recognize a command, its
response is, ‘‘Pardon.’’ If it doesn’t
recognize the command a second
time, its response is, ‘‘Please
repeat.’’ If it doesn’t recognize the
command a third time, it...

The incoming notif ication of the
HFT system can be set to a ring tone,
a prompt, or no notification.
Press and release the Talk button.
Af ter the beep, say ‘‘System.’’ The
HFT system response is, ‘‘System
options are setup and clear.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Setup.’’ The
HFT system response is ‘‘Would
you like an audible notif ication of
an incoming call?’’ To go back one step in a command
process, say, ‘‘Go back,’’ or press
the Back button.
If nothing is said while...

Press and release the Talk button.
If you say ‘‘Yes’’ af ter the beep, the
HFT system response is, ‘‘Would
you like the notification to be a
ring tone or a prompt?’’ If you say
‘‘No’’ af ter the beep, the HFT
system returns to its main menu.
Saying ‘‘No’’ will result in no ring
tone or prompt playback during an
incoming call. The audio system
will still be mute, and a message
will be displayed.
Press and release the Talk button.
Af ter the beep, say ‘‘Ring tone’’ or
‘‘Prompt.’’ The HFT system
response is...

The HFT system will accept a
numeric, f our-digit password that
you can use f or security purposes.
Follow the system setup
procedure f rom the step 1 through
the step 5 as described previously.
Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
The HFT system response is
‘‘What is the f our-digit number you
would like to set as your
password?’’Press and release the Talk button.
Af ter the beep, say the f our-digit
password you want to use. For
example,say‘‘1,2,3,4.’’TheHFT...

Press and release the Talk button.
Af ter the beep, say your f our-digit
password. For example, say ‘‘1, 2,
3, 4.’’
If the password is correct, the
HFT system response is ‘‘Main
menu.’’
If the password is not correct, the
HFTsystemresponseis‘‘1,2,3,4is
incorrect. Please try again.’’ Go back
to step 2.
If you f orget your password and you
cannot activate the HFT system,
consult your dealer to cancel the
password.Your Bluetooth compatible phone
with Hands Free Prof ile must be
paired to the HFT system bef...

With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Phone setup.’’ The HFT system
response is ‘‘Phone setup options
are status, pair, edit, delete, and
list.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Pair.’’ The
HFT system response is ‘‘The
pairing process requires operation
of your mobile phone. For saf ety,
only perf orm this f unction while
the vehicle is stopped. State a f our-
digit code f or...

Press and release the Talk button.
Af ter the beep, say the new name
of the phone. For example, say
‘‘Lisa’s phone.’’ The HFT system
response is, ‘‘The name has been
changed. Returning to the main
menu.’’ Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
The HFT system response is
‘‘Phone setup options are status,
pair, edit, delete, and list.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Edit.’’ The
HFT system response is ‘‘Which
phone would you like to edit?’’
Press...

To delete a paired phone, do this: To list all paired phones, do this:
Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
The HFT system response is,
‘‘Phone setup options are status,
pair, edit, delete, and list.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Delete.’’ The
HFT system response is, ‘‘Which
phone would you like to delete?’’
Press and release the Talk button.
After the beep, say the name of
the phone you want to delete. For
example say ‘‘Eric’s phone.’’...

To f ind out the status of the phone being
used, do this:To change f rom the currently linked
phone to another paired phone, do this:
Press and release the Talk button.
Af ter the beep, say ‘‘Phone setup.’’
The HFT system response is
‘‘Phone setup options are status,
pair, edit, delete, and list.’’Press and release the Talk button.
Af ter the beep, say ‘‘Next phone.’’
The HFT system response is
‘‘Searching f or the next phone.’’
The HFT system then disconnects
thelinkedphoneandsearchesfor
another paired...

To make a call using a name in the HFT
system phonebook, do this: To make a call using a phone number,
do this:
On vehicles with navigation system
With your phone on and the
ignition switch in the
ACCESSORY (I) or ON (II)
position, press and release the
Talk button. After the beep, say
‘‘Call’’ or ‘‘Dial.’’ The HFT system
response is, ‘‘What name or
number would you like to call/
dial?’’
Press and release the Talk button.
After the beep, say the name you
want to call. For example, say
‘‘Eric.’’ The HFT...