Hitachi Projector CP-X5022WN User Manual

1
Projector
CP-X4022WN/CP-X5022WN/
CP-WX4022WN
User's Manual (detailed)  
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this 
product. Be sure to read Safety Guide first. After reading them, store them in a 
safe place for future reference. WARNING
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ 
slightly from your projector.
• The...

2
Contents
Introduction  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
Features  . . . . . . . . . . . . . . . . . . . . . . 3
Checking the contents of package ...3
Part names  . . . . . . . . . . . . . . . . . . . . 4
Setting up   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
Arrangement  ................... 7
Connecting with your devices .....10
Connecting to a power supply .....15
Fastening the adapter cover  ......16
Using the security bar and slot  . . . .16
Remote control   . . . . . . . . . ....

3
Introduction
Introduction
• Keep the original packing materials, for future reshipment. Be sure 
to use the original packing materials when moving the projector. Use special 
caution for the lens.
• The projector may make a rattling sound when tilted, moved or shaken, since 
a flap to control the air flow inside of the projector has moved. Be aware that 
this is not a failure or malfunction.
Features
The projector provides you with the broad use by the following features.
ü      This projector has a...

4
Introduction
Part names
Projector
(1) Lamp cover (107)
The lamp unit is inside. 
(2) Speakers (x2) (
22, 52)
(3) Filter cover (
109)
The air fi lter and intake vent are inside.
(4) Elevator feet (x2) (
26)
(5) Elevator buttons (x2) (
26)
(6) Remote sensor (
18)
(7) Lens (
111 )
(8) Lens cover
(9) Pocket caps
(10) Intake vents
(11) Control panel (
5)
(12) Lens adjuster door  (
5)
The adjusters for the lens are behind 
the door. 
(13) AC IN (AC inlet) (
15)
(14) Exhaust vent
(15) Rear panel (...

5
Introduction
Part names (continued)
Control panel and Lens adjusters 
LOCK
(1) Lens adjuster door
(2) FOCUS ring (
27)
(3) ZOOM  ring (
27)
(4) HORIZONTAL (horizontal) adjuster (
27) 
(5) VERTICAL (vertical) adjuster  (
27)
(6) LOCK (horizontal lens position lock) (
27)
(7) STANDBY/ON button (
20)
(8) INPUT button (
23)
(9) MENU button (
34) 
(10) SECURITY indicator (
88)
(11) LAMP indicator (
114)
(12) TEMP indicator (
114) 
(13) POWER indicator (
114)
(14) Cap storage pockets 
Rear panel...

6
Introduction
Part names (continued)
Remote control 
(1) VIDEO button (
23) 
(2) COMPUTER button (
23)
(3) SEARCH  button (
24)
(4) STANDBY /ON button (
20)
(5) ASPECT button (
25)
(6) AUTO button (
28)
(7) BLANK button (
33)
(8) MAGNIFY - ON button (
32)
(9) MAGNIFY - OFF  button (
32)
(10) MY SOURCE/DOC.CAMERA  button  
(
24, 63)
(11) VOLUME - button (
22)
(12) PAGE UP button (
19)
(13) PAGE DOWN button (
19)
(14) VOLUME + button (
22)
(15) MUTE button (
22)
(16) FREEZE button (
33)...

7
Setting up
Setting up
Install the projector according to the environment and manner the projector will be 
used in.
For the case of installation in a special state such as ceiling mount, the specifi ed 
mounting accessories (
Specifi cations in the User’s Manual (concise)) and 
service may be required. Before installing the projector, consult your dealer about 
your installation. 
Arrangement
Refer to tables T-1 and T-2 at the back of User's Manual (concise) as well as the 
following to determine...

8
Setting up
Arrangement (continued)
WARNING
(continued on next page)►Install the projector where you can access the power 
outlet easily. If an abnormality should occur, unplug the projector urgently. 
Otherwise it could cause a fire or electric shock.
►Do not subject the projector to unstable conditions.  If the projector falls 
or topples over, it could result in injury or damage to the projector and the 
surrounding things. Using a damaged projector could result in a fire and an 
electric shock.
•...

9
Setting up
Arrangement (continued)
►Place the projector in a cool place with sufficient 
ventilation.  The projector may shutdown automatically or may malfunction if its 
internal temperature is too high.
Using a damaged projector could result in a fire and an electric shock.
•   Do not place the projector in direct sunlight or near hot objects such as heaters.
•   Do not place the projector where the air from an air conditioner or similar unit 
will blow on it directly.
•   Keep a space of 30 cm or...

10
Setting up
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of the device. 
Consult your dealer when the required accessory did not come with the product or 
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform 
the connection, according to...