Hitachi Projector CP-A220N/CP-A300N User Manual

1
ENGLISH
Projector
CP-A220N/CP-A300N
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to u\
se safely 
and utilize well the product.
WARNING  ►Before using this product, be sure to read all manuals for this 
product. See the “Using the CD manual”  (
 20)
 to read the manuals in the CD. 
After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the...

2
First of  all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and\
 the 
product as follows, for safety purpose. Please know their meanings befor\
ehand, 
and heed them.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to 
follow them always when handling the product. The manufacturer assumes no 
responsibility for any damage caused by mishandling that is beyond normal usage...

3
ENGLISH
Regulator y notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate mea\
sures.
This product may cause interference if used in residential areas. Such u\
se must 
be avoided unless the user takes special measures to reduce electromagne\
tic 
emissions to prevent interference to the reception of radio and televisi\
on 
broadcasts.
In Canada
This Class A...

4
Contents of  package
Your projector should come with the items 
shown below. Check that all the items are 
included. Require of your dealer immediately if 
any items are missing.
(1) Remote control with the two AA batteries 
(2) Power cord 
(3) Computer cable
(4)  Parts of cable cover
(5)   User’s manuals (Book x1, CD x1)
(6) Security label
(7) Application CD
(8) Wall mount unit and User's manual *
* CP-A220N/CP-A300N does not bundle them.
NOTE  • Keep the original packing materials for future...

5
ENGLISH
WARNING  ►Install the projector in a stable horizontal position.
►
Place the projector in a cool place, and ensure that there is sufficient ventilation. Do not 
place the projector where the air from an air conditioner or similar uni\
t will blow on it directly.
►Do not place the projector anyplace where it may get wet.
► 
Use only the mounting accessories the manufacturer specified, and leave installing 
and removing the projector with the mounting accessories to the service \
personnel.
►...

6
Access point
COMPUTER IN1
COMPUTER IN2HDMIUSB TYPE B
S-VIDEO
VIDEOAUDIO OUT
AUDIO IN3
AUDIO IN1
AUDIO IN2MIC
MONITOR OUT
CONTROL
     USB
TYPE A   DC5V 
     0.5AR L
COMPONENT
Cb/PbY
Cr/Pr
AUDIO
OUT
HDMI
R L
R
L
VIDEO
S-VIDEO
AUDIOOUT
AUDIO
OUT
AUDIOOUT
USB
(A) DISPLAY
RS-232C
LANVCR/DVD/Blu-ray
Disc player
Computer
Connecting with your devices
Be sure to read the manuals for devices before connecting them to the projector . 
Make sure that all the devices are suitable to be connected with this pr\...

7
ENGLISH
USB storage device
Connecting with your devices (continued)
COMPUTER IN1
COMPUTER IN2HDMIUSB TYPE B
S-VIDEO
VIDEOAUDIO OUT
AUDIO IN3
AUDIO IN1
AUDIO IN2MIC
MONITOR OUT
CONTROL
     USB
TYPE A   DC5V 
     0.5A
R LRGB IN
Microphone
systemSpeakers(with an amplifier)Monitor
NOTE  • If a loud feedback noise is produced from the speaker, move the 
microphone away from the speaker.
• This projector doesn't support plug-in power for the microphone.
• 
The COMPUTER IN1/2 port can support a...

8
Connecting power supply
1. Put the connector of the power cord into the 
AC IN (AC inlet) of the projector.
2. Firmly plug the power cord’s plug into the 
outlet.  In a couple of seconds after the power 
supply connection, the  POWER indicator will 
light up in steady orange.
Please remember that when the DIRECT POWER ON   
function activated, the connection of the power supply make the projecto\
r turn on.
WARNING  ►Please use extra caution when connecting the power cord, as 
incorrect or faulty...

9
ENGLISH
Using the cable cover
Utilize the cable cover as the guard and blind for the connecting parts.\
1. Connect the signal cables and the power cord to the projector first.
2. Combine parts as shown in figure,  
and assemble the cable cover. 
3 . Insert the three knobs on the cable cover into the three holes on the pr\
ojector 
as shown in the figure. Pass the cables through the holes on the bottom of 
the cable cover. 
CAUTION  ► Be careful not to pinch the cables in the cable cover, to 
prevent...

10
Preparing for the remote control
Please insert the batteries into the remote control before using it. If \
the remote 
control starts to malfunction, try to replace the batteries. If you will\
 not use the 
remote control for long period, remove the batteries from the remote con\
trol and 
store them in a safe place.
1. Holding the hook part of the battery 
cover, remove it.
2. Align and insert the two AA batteries 
(
HITACHI MAXELL, Part No.LR6 or R6P) 
according to their plus and minus terminals 
as...