Hitachi Pj-Tx200 Projector Users Manual

Projector
PJ-TX200 
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANOUser’s Manual - Operating GuideThank you for purchasing this projector.
Please read this user’s manual thoroughly to ensure the proper use of this product.
Manuel d'utilisation - Guide d'utilisationMerci d’avoir acheté ce projecteur.
Veuillez  lire  ce  manuel  d’utilisation  entièrement,  pour  vous  assurer  que  vous  utiliserez 
correctement ce produit.
Bedienungsanleitung - BenutzerhandbuchHerzlichen Glückwunsch zum Kauf dieses...

About The Symbols
 Various symbols are used in this manual, the user’s manual and on the product 
itself to ensure  correct usage,  to prevent  danger  to the user  and  others, and  to 
prevent property damage. The meanings of these symbols are described below. 
It  is  important  that  you  read  these  descriptions  thoroughly  and  fully  understand 
the contents.
Projector
User's Manual - Safety Guide
1
Typical Symbols
 T h i s  s y m b o l  i n d i c a t e s  a n  a d d i t i o n a l  w a r n...

2
 Safety Precautions
 WARNING
Never use the projector if a problem should occur.
Abnormal  operations  such  as  smoke,  strange  odor,  no  image,  no  sound, 
excessive  sound,  damaged  casing  or  elements  or  cables,  penetration  of 
liquids or foreign matter, etc. can cause a fire or electrical shock.
In such case, immediately turn off the power switch and then disconnect the 
power  plug  from  the  power  outlet. After  making  sure  that  the  smoke  or  odor 
has  stopped,  contact  your...

 WARNING
Be cautious of High temperatures of the projector.
High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. 
Do  not  touch  about  the  lens,  air  fans  and  ventilation  openings  during  use  or 
immediately after use, to prevent a burn. Take care of ventilation.
• Keep  a space  of 30  cm or more  between  the sides  and  other  objects  such 
as walls.• Do not place the projector on a metallic...

 WARNING
Be careful in handling the light source lamp.
The  projector  uses  a  high-pressure  mercury  glass  lamp  made  of  glass. 
The  lamp  can  break  with  a  loud  bang,  or  burn  out.  When  the  bulb  bursts, 
it  is  possible  for  shards  of  glass  to  fly  into  the  lamp  housing,  and  for  gas 
containing mercury to escape from the projector’s vent holes. 
Please carefully read the section “Lamp”.
Be  careful  in  handling  the  power  cord  and  external  connection 
cables.
If  you...

5
 Safety Precautions (continued)
 CAUTION
Be careful in moving the projector.
Neglect could result in an injury or damage.
•  Do  not  move  the  projector  during  use.  Before  moving,  disconnect  the 
power  cord  and  all  external  connections,  and  close  the  slide  lens  door  or 
attach the lens cap.
• Avoid any impact or shock to the projector. 
• Do not drag the projector.
•  For moving the projector, use the enclosed case or bag if provided.
Do not put anything on top of the projector....

6
 Safety Precautions (continued)
NOTE
Do not give the remote control any physical impact.
A physical impact could cause damage or malfunction of the remote control.
• Take care not to drop the remote control.
• Do not place the projector or heavy objects on the remote control.
Take care of the lens.
•  Close  the  slide  lens  door  or  attach  the  lens  cap  to  prevent  the  lens  surface  being scratched when the projector is not used.
• Do not touch the lens to prevent fog or dirt of the lens that...

7
 Safety Precautions (continued)
NOTE
About consumables. 
Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans 
have  a  different  lifetime  in  each.  These  parts  may  need  to  be  replaced  after  a  long  usage 
time.
• This product isn’t designed for continuous use of long time. In the case of continuous use 
for  6  hours  or  more,  or  use  for  6  hours  or  more  every  day  (even  if  it  isn’t  continuous),  or 
repetitious  use,  the  lifetime  may...

•  If  the  lamp  should  break  (it  will  make  a  loud  bang  when  it  does),  unplug 
the  power  cord  from  the  outlet,  and  make  sure  to  request  a  replacement 
lamp  from  your  local  dealer.  Note  that  shards  of  glass  could  damage  the 
projector’s internals, or cause injury during handling, so please do not try to 
clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does), ventilate 
the room well, and make sure not to...

9
 Warranty And After-Service
U n l e s s  s e e n  a n y  a b n o r m a l  o p e r a t i o n s  ( m e n t i o n e d  w i t h  t h e  f i r s t  p a r a g r a p h  o f 
WARNING  in  this  manual),  when  a  problem  occurs  with  the  equipment,  first  refer  to  the 
“Troubleshooting”  section  of  the  “User’s  manual  –  Operating  Guide”,  and  run  through  the 
suggested checks. 
If  this  does  not  resolve  the  problem  contact  your  dealer  or  service  company.  They  will  tell 
you what...