Hitachi LED LCD HDTV W806 User Manual

							21
To connect a HDMI or a DVI device to the unit
The HDMI/DVI input receives digital audio and uncompressed video from a \
HDMI device or uncompressed digital video from a DVI 
device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it tr\
ansfers only video signal. Separate analog audio cables are 
required.
HDMI - to - DVI adapter cable  
(HDMI type A connector) (not supplied)
Audio cord (not supplied)
HDMI cable (type A connector) (not supplied) To DVI output
To HDMI out HDMI deviceDVI device
To HDMI/DVI IN
  or
Back of the unit
When using a HDMI input from a Set-Top-Box, it is recommended to use a 1\
080p, 1080i or 720p input signal.
When the HDMI input is a 1080p signal, it is recommended that the length\
 of the cable should be less than 5 meters. RGB/DVI AUDIO Input
3(      ) 
						

							Searching for Signal...
22 
						

							23
Network Settings
Network Connection
You can attach your TV to your LAN by using matchable cable in thr ee ways:
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an exter nal modem using a Cat 5 cable. See the diagram below.  
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an  router which is 
connected to an external modem. Use LAN cable for the connection. See th\
e diagram below. 
Depending on how your network is configured, you may be able to attach y\
our TV to your LAN by connecting 
the LAN port on the back of your TV directly to a network wall outlet wi\
th a Cat 5 cable. See the diagram  below. Note that the  wall outlet is attached to a modem or router elsew\
here in your house.  
You can use ADSL modems that support DHCP if your network requires a Sta\
tic IP address. ADSL modems  that support DHCP also let you use Static IP addresses. 
 
The Modem Port on the Wall TV Rear Panel
Modem Cable External Modem 
(ADSL / VDSL / Cable TV)
LAN Cable
LAN Cable LAN Cable
Modem Cable
The Modem Port on the Wall
TV Rear Panel
External Modem 
(ADSL / VDSL / Cable TV) router
(having DHCP server)
If you have a Dynamic Network, you should use an ADSL modem or router th\
at supports Dynamic Host 
Configuration Protocol (DHCP). Modems and routers that support DHCP au\
tomatically provide the IP  address, subnet mask, gateway, and DNS, so you don’t have to enter th\
em manually. Most home networks are 
Dynamic Networks.
Some networks require a Static IP address. If your network requires a St\
atic IP address, you must enter the IP 
address, subnet mask, gateway, and DNS values manually on your TV’s N\
etwork Setup Screen when you set up 
the network connection. To get the IP address, subnet mask, gateway, and\
 DNS values, contact your Internet 
Service Provider (ISP). 
If you have a Windows computer, you can also get these values through yo\
ur computer.       
The LAN Port on the Wall
LAN CableTV Rear Panel
 1 Connecting to a Wired Network
You can set up your TV so that it can access the Internet  through your local area network (LAN) with an Ethernet or wireless 
connection.  
						

							Return
 2 Network Setup (Auto) 3 Network Setup (Manual)
24
1. Connect your TV to your LAN as described in the previous 
section. 
2.
 Turn on your TV 
.
3. In the  Network  screen, select  Configuration a n d p r e s s 
the

 [ENTER] button to enter the submenu.
4. Set  Internet Connection  to on and Interface to Ethernet.  
5. Select  IP Setup and press the [ENTER] button.
6.

 Set Address Type to Auto.
7. Auto acquires and enters the needed internet values  automatically.
8. If the Network function has not acquired the network  connection values 
How to set up automatically
and navigate toNetwork withinthe
Setup menu
youwill need toenter this
information manuallysee
page 23Network Setup
 Manual ” “ Use
  the   Network Setup when connecting your TV to 
a network that requires a Static IP address.
Getting the Network Connection Values
To get the network connection values on most windows 
computers,
  follow these steps:
1 . R i g h t c l i c k t h e N e t w o r k i c o n o n t h e b o t t o m r i g h t o f t h e  screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The network  connection values are displayed.
How to set up manually
To set up your TV’s cable network connection manually, 
follow these steps:
1. Follow Steps 1 through 5 in the “How to set up  automatically” procedure.
2 . S e t  Address Type  to Manual .
3

. P r e s s t h e [
5/7] button to select  IP Address a n d p r e s s 
t
h e [ / ] button to move the cursor to the entry field. 
Then press the 0~9 buttons to enter the numbers.
4. Press the [MENU] button to exit  IP Address a n d p r e s s t h e 
[
5/7] button to select the next options to enter the 
numbers. 
5. When done, press the [MENU] button to return to the  previous menu.
6. Select  Connection Test  to check the internet 
connectivity

.  
Manual
Return
Move
Internet Connection     On
Interface                    Ethernet
IP Setting
Information
Wireless Status
Connection Test Subnet Mask
Default Gateway
Primary DNS
Secondary DNS Address Type
IP Address
Manual
   
0 .        0 .        0 .        0
0 .        0 .        0 .        0
0 .        0 .        0 .        0
0 .        0 .        0 .        0 0 .        0 .        0 .        0
Wireless Setting
Return
Move
Home Network                   Off
Netflix
VUDU
Network
Network Settings
Use the Automatic Network Setup when connecting the TV 
to a network that supports DHCP. To set up your TV’s cable 
Ethernet connection automatically, follow these steps: 
Move
Network
Network 
						

							Network Settings
25
router
router
it may not be compatible with the TV.
modem/router
Hitachi
Wireless LAN 
Adapter built-in TV 
set
b/g
n
b/g
Hitachi's built-in Wireless LAN
Caution:  
This wireless appliance complies with FCC radiation limits set forth for\
 an uncontrolled environment. 
Install and operate with a minimum of 8 inches between it and your body.\
Connecting to a Wireless Network
Wireless IP Router
router router 
						

							Network Settings
26
How to set up 
1. Turn on your TV, operate according to the description in 
the Settings menu until the Network screen appears.
2. On the Network screen, select Configuration and press 
[ENTER] button to enter the submenu.
3. Set Internet Connection to On and Interface to Wireless.
4. Choose Wireless Setting and press [ENTER] button to 
select it.
  You can select: Scan\Manual\Auto.
5.If you have active wireless networks nearby, they will 
appear on-screen like the example shown below.
\b	
\f

\

		

\f	
\
\b\b\b

\b

desired network and press [ENTER] button to confirm.6.the soft keyboard of Enter Password will pop up. After 
entering the password, press ENTER to connect. If there is 
no password, you can press Next button to connect directly.
Wireless Setting
Return
Move
Internet Connection     On
Interface                    Ethernet
IP Setting
Information
Wireless Status
Connection Test
Wireless Setting
Network
Move·
&ýNext·
Scan
Manual
Auto
Wireless Setting
Return
Move·
&ýNext·Previous·
SSID                                      Security                      \
    Signal
hitachi                              WPA/WPA2-PSK                     10\
0
BBY-TP                           WPA/WPA2-PSK                       76
pad test                                 WPA-PSK                        \
     39
QMC2                             WPA/WPA2-PSK                        36
A                                                  None                 \
              32
O                                                 None                  \
              28
QMC lab                                WPA-PSK                          \
   22
Wireless Setting
Return
Input Next·Previous·
Please input WPA/WPA2-PSK key
Wireless Setting
Return 
						

							Network Settings
Computer, TV and other digital devices can be connected via 
Home Network and they can share files with each other. You 
can use the TV set as a Home Network Digital Media Player (DMP) 
device to enjoy movies, pictures, musics and other multimedia 
materials in your computer through a Home Network connection.
Home Network Setting needs to be set on the TV and computer .
NET setup on the TV :
NET setup:
1. Turn on your TV, operate according to the description in the  Settings menu until the NET screen appears.
2. On the NET screen, select Configuration add press the  [ENTER] button to enter the submenu.
3. Set Internet Connection to on and Interface to Ethernet. 4. Select IP Setting and press the [ENTER] button.
5. Set Address Type to Auto.
6. Auto acquires and enters the needed internet values  automatically.
7. If the NET function has not acquired the NET  connection values, go to the manual for directions.
8. If Set Address Type to Manual and enter the IP Setting 
.  [
5/7] button to select IP Address and 
press the [
/ ] button to move the cursor to the entry field. 
Then press the 0~9 buttons to enter the numbers.
respectively
sub-
submenuPress the
Home Network Settings
Set Home Network to On:
1. On the Network screen, select Applications and press the  [ENTER] button to enter the submenu.
2. Press the [
] button to set Home Network to On.  
 9. Press [Menu] button to exit IP Address  and press the [
5/7]   
button to select the next   to enter the numbers. 
10.When you are done, press the Menu   to return to the  previous menu.
11.Select Connection Test  to check the internet connectivity.   If the test is not successful, please check         the 
configuration is correct. If the test is successful,  option
button
that proceed with
thefollowing instruction to 

“Set  computer through a Home 
Network to On”
If your computer can not support Home Network, you need install a 
software that supports Home Network such asTVersity and 
Windows Media Player11. It is recommended to select 
Windows Media Player11 .  
Media Share Settings in computer
1. Start Windows Media Player11.
2. Click “Library” and then select “Add to Library...”.
27
Return
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS Address Type
IP Address
Manual
   
0 .        0 .        0 .        0
0 .        0 .        0 .        0
0 .        0 .        0 .        0
0 .        0 .        0 .        0 0 .        0 .        0 .        0
Move
Network
Return
Move
Home Network                   Off
Netflix
VUDU
Network 
						

							3.  “Add To Library” will pop up on the screen. Click “Add”.
4.  Select a folder and click OK button.
5. Click “Close” to close the dialog.
Setting to share files
1. Click “Library” and move the cursor to select
    “Media Sharing...”2.   the   box for “Share my media” .
3. An equipment icon will appear in the white, box area if the 
DLNA Settings have been set correctly. Select the 
and then click “Allow”. 
4. The TV   access the shared files from the computer.  Select check
equipment
icon 
cannow
Network Settings
28 
						

							Internet-based Services
USAGE INFORMATION AND REQUIREMENTS
Operational Remote Control buttons
ButtonsDescription
Stops playback and displays the movie 
title screen. Selects the on-screen menu itemsPress to launch Netflix instant streaming 
directly.
Press to enter VUDU HD Movies directly.
Sets pauses and still pictures. Press the 
button to return to playback.
Displays the TrickPlay screen and fast 
forwards playback.
Displays the TrickPlay screen and fast  
reverses playback.
ENTER
EXIT
RETURN
Plays the next video. 
Plays the previous video.  Returns to the previous menu. Confirms selections
Closes the menu.
Links to various internet services.
Network Settings
RGBAVCOMPHDMI
INFO
EXITMENU
RETURN
29
If you intend to use the TV to access internet-based services, 
please first review see the following information
1. Use of internet-based services (e.g., Netflix, VUDU, etc.) 
requires a working broadband
internet connection (1 to 2 Mbps for SD video, 2.25 to 4.5
Mbps for HD video and 4.5 to 9 Mbps for HDX video).
2. VUDU and other internet-based services are provided
by the applicable service providers, and not by Hitachi, and such 
services, may change or be discontinued at any time and
may be subject to restrictions imposed by your internet
service provider. The quality, functionality, or availability
of such services may be affected by the capacity of your
internet connection. Use of Netflix, VUDU and
other internet-based services may require the creation of a
separate account through a computer with internet
access.
3. Not all features and functions offered by service providers such 
as Netflix, VUDU and other internet-based services will necessarily 
be available through the TV.
4. Establishing and maintaining a broadband internet connection 
and using Netflix, VUDU and other internet-based services may
require one- time payments and/or recurring charges.
5. You are solely responsible for any charges incurred as a
result of using internet-based connections, services or content, 
including, without
limitation, communications charges for the provision of
internet or network services and any charges incurred for
third-party internet content services, such as video-on-
demand or subscription services. All such third-party services
are provided pursuant to the terms and
conditions established between such third-party
providers and you.
6. HITACHI MAKES NO REPRESENTATIONS OR
WARRANTIES TO YOU REGARDING THE CONTENT, 
AVAILABILITY, PERFORMANCE, RELIABILITY OR 
FUNCTIONALITY OF ANY THIRD PARTY INTERNET-BASED 
SERVICES YOU ACCESS OR ATTEMPT TO ACCESS USING 
THE TV AND HITACHI DOES NOT WARRANT THAT ANY OF
THEM WILL BE UNINTERRUPTED, ERROR FREE OR
SATISFACTORY. ANY IMPLIED WARRANTY,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, OF ANY SUCH THIRD PARTY
INTERNET-BASED SERVICES, IS EXPRESSLY EXCLUDED
AND DISCLAIMED. UNDER NO CIRCUMSTANCES WILL
HITACHI BE LIABLE IN CONTRACT, TORT OR UNDER
ANY OTHER THEORY FOR ANY DAMAGES ARISING
OUT OF OR IN CONNECTION WITH YOUR USE OF ANY
SUCH THIRD PARTY INTERNET-BASED SERVICES OR ANY 
CONTENT ACCESSIBLE THEREFROM, EVEN IF HITACHI IS 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES IN 
ADVANCE.
ENTER 
						

							Tool Bar
Chapters0:00:571:29:19
123456
1. Chapters
 press the [ENTER] button to   
and press  
2. Fast backward  Then press [ENTER] button to select the backward 
speed. You can press [ ] button to achieve the 
function.
3. Play/Pause You can press [ II] button to play/pause directly  when 
there is no control bar on the screen.
4. Fast forward  Then press [ENTER] button to select the forward speed. 
You can press [ ] button to achieve the function.
5. Progress bar The progress bar when playing.
Select Chapters,
select, 
 [  / ]
  to select the chapter.
3 How to Input the Email Address
c d
ef
1. Press [5/7

\f

\

\b
	

\b
\
		
bar and press [ENTER] button to confirm.
2. Press [ENTER] button to display the keyboard. There are some shortcuts on the bottom of the keyboard so 
that you can input part of the address often used directly

.
Other keys are used as the keyboard of your computer. 
3. Press [5/7

\f

\

\b
	

\b
\b\

	 you want to select and then press [ENTER] button to confirm. 
If you want to delete one character

, move the cursor to Back 
key       and press [ENTER] button to confirm.
4. Move the cursor to the Done and press [ENTER] button to  confirm if you have completed the address input.
Then the new address will appear on the address bar

. 
n o p q r s t u v w x y z
Symbols
Enter your email address to begin enjoying VUDU!
Space Shift
.com0 1 2 3 4 5 6 7 8 9@
a b c d e f  g h I j k l m
Enter your email address
Cancel
Done
Enter email address
VUDU HD Movies
VUDU is an on-demand service that offers high-definition 
movies.
To enjoy these movies,
  please register and log in to your  
VUDU account.
1. Press the  [            ] button to display the network   main
  menu.
2. Press the [ / ] button to select the VUDU HD Movies 
button to enter directly.  
efer to “How to Input the Email Address”  
Press the[ ·/&ý / / ] button to move the cursor to select 
service items in the VUDU HD Movies  home page, and 
press the [ENTER] button to confirm.
6.

 In the process of watching a movie, press [ ENTER] t o 
display/exit

 the tool bar, press [ / ] to select the 
functi on icon, and press [ENTER]  to confirm. 
7. Press the [ENTER] button to return to the   menu, or  press the [EXIT] button to close the menu.
application
previous
 [ENTER]
3.

 Select the Sign Up  icon on the VUDU HD Movies  i nterface, and press [ENTER] to enter.
4. Enter your email address to start your VUDU experience.   ( R )
5. 
1 Brief introduction
2 Operation instructions
You can access the VUDU HD Movies by the following 
methods:
Network Settings
Press Enter to launch VUDU Movies. 
30
icon and press  to enter it, or press the [VUDU]