Hitachi Le46S704 Lcd Hdtv Owners Guide

FIRST TIME USE
11
Quick Reference Remote Control Buttons And Functions
In addition to controlling all of the functions on your Hitachi LCD TV, the new remote control is designed to operate different 
types of devices, such as, DVD Players, cable boxes (CBL), set top boxes, satellite receivers (SAT), VCRs and compatible 
HDMI CEC DVD Players. The remote control must be programmed to control the chosen device. Please see pages 22~27 for 
a complete description of all features and programming of the remote...

12
Quick Setup Guide
a). Secure it with the Wire Clamp (see page 7) .Wire Clam p
b). Connect the power cord to the AC outlet.
c).  The  Indicating  Lamp  will  light  red  (Standby  mode)  and  then 
light blue (picture is shown).
2. CONNECT YOUR NEW HITACHI LCD TV TO THE POWER SOURCE
3. POWER ON/OFF YOUR NEW HITACHI LCD TV
Press the POWER button on the remote control or the POWER 
button on the Front Control Panel to power on/off the LCD TV. 
or
Air/Cable
Rear Panel Jack
CLU-49101S
For  Stand-By 
Power...

FIRST TIME USE
13
TV Setup Wizard
Setup Wizard (5/8)Please select TV RF tuning band ...Move Select
SEL
Air
Cable
Previous Cancel
The  sixth  step  will  start  the  scanning  feature  to  find  the  channels 
available  on  the  antenna  or  cable  system.  Press  the    SELECT 
button on the remote control to start the channel scan.
Setup Wizard (6/8)Please check that the RF cable is
connected properly.
Scan time may take over 20 minutes.
Move Select
SEL
Start
Previous Cancel
The  seventh  step  is  the...

14
Side Panel Connections
The  following  connection  diagrams  are  offered  as  suggestions.  However,  you  may  need  to  modify  them  to  accommodate  your  particular 
assortment of devices and features. For best performance, video and audi\
o cables should be made from coaxial shielded wire.
There  are  four  SIDE  panel  HDMI  jacks  provided  as  a  convenience  to  allow  you  to  easily  connect  HDMI  or  DVI  signals  from  a  DVD,  
set  top  box,  Video  Game  as  shown  in  the...

FIRST TIME USE
15
Side Panel Connections
CONNECTING  A DEVICE WITH HDMI OR DVI CAPABILITY 
TO HDMI 1/DVI, HDMI 2 ~ HDMI 4 
Connect the HDMI or DVI to HDMI connection cable from the 1. 
output  of  the  HDTV  set  top  box  or  DVD  player  to  the  HDMI 
input as shown near the side panel at right.
With DVI output devices, connect a DVI to HDMI cabel to the 2. 
HDMI  1/DVI  input.  Connect  the  audio  out  cable  to  DVI Audio 
Input  or  connect  the  audio  cables  from  the Audio  output  jack 
from...

16
Rear Panel Connections
Cables are not included.NOTE
TIPS ON REAR PANEL CONNECTIONS 
COMPONENT Y-PbPr connection is provided for high performance DVD players, VCRs etc. that have this feature. Use these connections  ♦
in place of the standard video connection if your device has this featur\
e.
For additional information on connecting your other electronic devices, \
please refer to the device’s owners guide. ♦
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components...

FIRST TIME USE
17
Completely insert the connection cord plugs when connecting to rear panel jacks.  If you do not, the picture and/or sound • 
may be abnormal.
Cable plugs are often color-coded. Match colors of plugs and jacks, i.e. connect red to red, white to white, etc. • 
To return to the last channel viewed, select “0.TV” from the INPUTS menu.• 
NOTES
CONNECTING A DEVICE AND STEREO AUDIO   DEVICE 
TO COMPONENT/AV
Connect the Y, P1. b/Cb, Pr/Cr and AUDIO cables from the Y, Pb/
Cb,  Pr/Cr  OUT  and...

18
The Remote Control
POWER Button
Press this button to turn the TV set on or off.
DEVICE Buttons
In  addition  to  controlling  all  the  functions  on  your  Hitachi  LCD 
TV,  the  new  remote  control  is  designed  to  operate  different 
types of VCRs, cable boxes, set top boxes, satellite receivers, 
DVD  players,  and  other  audio/video  device  with  one  touch. 
Basic operation buttons are grouped together in one area.
To operate your LCD TV, select TV by pressing the TV  button on 
the remote...

19
REMOTE CONTROL
How To Use The Remote Control To Control Your TV
Closed Captioning will display automatically when MUTE is on 
and Closed Caption is set to With Mute (see page 37).
When the TV power is turned off at a volume level 21 or greater, 
the  volume  level  will  default  to  20  when  the  TV  is  turned  on. 
However, if it is set to a level 20 or less, the volume level will 
be at the level it was set when the TV was turned off.
MENU Button
The MENU button will start the On-Screen Display....

20
How To Use The Remote Control To Control Your TV
Auto
Use this aspect mode to have the aspect mode change automatically 
by signal detector. 
4:3 
Use  this  aspect  mode  to  display  conventional  (4:3)  images.  Side 
panels (black areas) are placed to the left and right of the image to 
preserve the original aspect ratio of the source. 
16:9 
Use this aspect mode to display 16:9 sources like HDTV and DVD’s 
preserving the original 16:9 aspect ratio showing 95% of the size.
Full
Use  this  aspect...