Hitachi LE39S406/LE39H316, LE32S406/LE32H316 Lcd Hdtv Owners Guide

11 EN
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover. Before using the remote control, batteries must first be installed.Use two “AAA” size batteries. The batteries may last approximately 
one year depending on how much the remote control is used. 
For best performance, it is recommended that batteries should 
be replaced on a yearly basis, or when the remote operation 
becomes erratic. Do not mix old and...

EN 12
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you 
are using a Cable TV service, see Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna 
Jack.
75 ohm
Coaxial
CableAntenna
Jack
Cable TV connections
For basic Cable TV service not requiring a Converter/Descrambler box, connect the
75 ohm Coaxial Cable directly to...

13 EN
Starting setup
The Auto Setup menu appears the first time you turn on the 
TV, and assists you to specify the Air/Cable setting, and 
program your channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system 
connection is made!
1To turn on the TV, press POWER (POWER indicator on the 
front of the unit changes green. It may take approx. 10 seconds 
for a picture to appear on screen.) The Auto Setup function 
begins.
Auto Setup
Scan StartThi i h b STORE b i h
TV Location Store...

EN 14
DISPLAYPress DISPLAY to display the current information on the screen.
When the TV receives a digital signal, the digital information will 
appear.
62-1   HDTV_Moving_Picture...CH-1    TV-MA
Digital     Air 
No Program Information is availableSleep Timer
Off
English
Full
1080i
USB Memory Information Play Time : --:--:--
Message: Now Live ViewUSB Memory is unplugged
Channel number • Station name•
Channel label (if preset) •Broadcast program name•
Parental Control • Signal type•
Sleep timer • Audio...

15 EN
Convenience functions
You can change the default settings to your preference by pressing the MENU button on your remote, selecting one of the icons at the 
left of the menu, and following the On-Screen prompts.
Icon Selected Items Setup hint
Video Picture Mode Dynamic Bright and dynamic picture (factory-set)
Standard Standard picture quality (factory-set)
Movie Movie-like picture setting (factory-set)
Custom Your personal preferences (set by you; see “Picture Setting”)
Picture 
SettingBrightness /...

EN 16
Memorizing channels
This TV is equipped with a channel memory feature which 
allows channels to skip up or down to the next channel 
set into memory, skipping over unwanted channels. Before 
selecting channels, they must be programmed into the TV’s 
memory. To use this TV with an antenna, set the Source 
option to the Air mode. When shipped from the factory this 
menu option is in the Cable mode.
Air/Cable selection
1Select “Channel  Auto Channel Scan  Source”.
2Press  or  to select “Air” or...

17 EN
Checking the digital signal 
strength
This TV will allow you to view the digital signal meter for 
digital channels. 
1Select “Channel  Signal Meter”, then press  or ENTER.
2The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to obtain the 
maximum signal strength.
Signal Meter
Signal Level0 50 100
CH
NOTE:
Signal meter feature is not available for analog channels.
After 240 seconds the Signal Meter screen will clear and the TV 
will return to normal...

EN 18
To set the Parental Control
1Select “Locks”, then press  or ENTER.
2Use Number buttons (0-9) to enter your password, then 
press ENTER. The Locks menu will appear.
3Press  or  to select “Parental Control”, then press  or  to 
select “On” .
4Press  or  to select “Ratings”, then press  or ENTER.
The Ratings menu appears.
5Press  or  to select which rating will be used, then press  
or ENTER. Each rating below will appear.
TV
TV-YTV-Y7TV-G
TV-PG
TV-14
TV-MA
TV 
You can set the rating using...

19 EN
Closed Caption
WHAT IS CLOSED CAPTIONING?This television has the capability to decode and display Closed 
Captioned television programs. Closed Captioning will display 
text on the screen for hearing impaired viewers.
Captions: This Closed Caption Mode will display text on the 
screen in English or another language if program supports other 
languages. Generally, Closed Captions in English are transmitted 
on CC1 and a Closed Caption in other languages is transmitted 
on CC2.
Text: The Text Closed...

EN 20
NOTE:
Selectable picture format aspect ratios may vary depending on 
the input source or broadcast signal.
Aspect menu also can be displayed by pressing ASPECT on 
the remote control. •
•
NaturalIn some cases, this image will display the size of standard 4:3 with 
a black side bar.
Cinema Wide1 (for 4:3 format programs)To fill the screen, the right and left edges are extended. However, 
the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden....