Hitachi L37v01 Instructions For Use

							
English-10-
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1-Connect the power cord to the system. Press Power
ON/OFF switch. Then the TV switches itself to
stand-by mode (optional).
Note that the TV will always switch to stand-by mode,
if you press POWER ON/OFF button whileChild Lock
is set to ON.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the  -P/CH
or  P/CH+  button on the TV or press the P+orP-
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
(stand-by)” button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
MENUGUIDE
RETURN
FUNCTION
OK
+
For Displaying
Menu Options
For Navigation
To Confirm Choices
1- Pressto display the menu.
2- Press
_or`button to select an icon.
3- Use
borabutton to highlight. Press`for more
options in analogue TV mode. Use OKin DTV mode
for viewing a submenu.
4- Press
_or`buttons to change the settings. Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
press
.
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
Initial Settings
When the TV is turned on for the first time, IDTV is on
first. Because this is the first time that IDTV has been
used, there are no channels stored in the memory.
When the TV is turned on for the first time, the menu
for the language selection appears on the screen.
The message “Welcome please select your lan-
guage!” is written in all language options sequen-
tially in the menu on the screen.
By pressing
orbuttons highlight the language
you want to set and press OKbutton. In the menu
“Set Language” is written next to “OK” item to indicate
that “Press SELECT button to set the highlighted lan-
guage option.”
You can get information about the menu usage by
pressing
button. And pressbutton again to
exit the help menu.
After then, First time Installation Menu will appear on
screen. By pressing
orbuttons, selected coun-
try item you want to set and press OKbutton.
First time installation
Cho ose Country
Set c ountry and c ontinue insta lla tionOKCzech
After the First time Installation is set, the following
message appears on the screen.
Doyou want to start automatic search?
Ye s No
 To start automatic search, select Ye s ,to cancel
select No.
 To select an option “YesorNo”, highlight the item by
using
orbuttons and press OKbutton.
The IDTV will automatically tune to the transmission
channels according to selected country standards
looking for digital terrestrial TV broadcasts and dis-
playing the names of channels found. This process
will take about five minutes. To cancel searching, you
can press
button at any time during the process.
MENU
Codec 4:3
Codec 16:9
SearchingUHF channels 62. Please wait. This will take a few minutes
Cancel searching
Automatic Search
 
						

							
English-11-
AfterAutomatic Search process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode:
AUTO PROGRAM
Cou ntryUKText languageWest
Select your Language, Country and Text language by
using
a/band_/`buttons. Press OKbutton to
continue. To cancel, press BLUEbutton.
For more information on this process, see “ Install
Menu ” section.
Everyday Operation
Pressing the TV/DTTbutton at any time while watch-
ing television programmes will switch the TV set be-
tween the digital terrestrial television broadcasting
and the analogue broadcasting.
Information Banner
 Whenever you change the channel using the P+or
P- buttons or the number buttons, TV displays the
channel picture along with an information banner at
the bottom of the screen. This will remain on the
screen for approximately three seconds.
 The information banner can also be displayed by press- ing the
button at any time while watching the TV..
Pressing the
button again removes the banner..
4RTL 09:10
CH 48
Now: NEWS
Next: NEWSSignal :
04:35-11:00
11:00-17:55
The information banner gives a number of facts on the
channel selected and the programme on it:
 The name of the channel is displayed along with itschannel list number and an indication of the strength of
the signal received on this tuning channel.
 The current and next programme information are given with the start and finish time.
 The current time information is displayed along with channel name.
Hint
Not all channels broadcast the programme data. If the name and times of the programme are not available then
“No Information Available” is displayed in the information
banner.
If the selected channel is locked, you must enter the correct
four digit key to view the channel.
Enter Lock Key
ELECTRONIC PROGRAMME GUIDE(EPG)
Some, but not all, channels send information about the cur-
rent and next events. Please note that event information is
updated automatically. If there is no event information data
available for channels, only channel name with
“No Infor-
mation Available” banner is displayed.
 GUIDEbuttontoviewthe EPGmenu.

orbuttons to navigate in Channels or
Programmes.

orbuttons to navigate through the channel
and programme list.
 In EPG Menu, you can easily see the extended help information by pressing the
button and by pressing
this button again you can close this window.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten2. BBC TWO Driven CrazyClifford The BigRed Dog5. five The Chart Dawson’s Creek
Navigate Schedule Watch More
ElectronicProgrammeGuide Wed31/709:13
1ONE
OK
5. FIVE The Chart Dawson’s Creek
 In the EPG Menu all channels are displayed. The current
channel is highlighted when you enter the EPG menu.

orbuttons to change the channel. Also
press REDorGREEN buttons to make page up/down
scroll for the channels. And press OKbutton to
watch the highlighted channel.
 If you highlight an event, short event description, extended event description, start and finish time of
the event are displayed on the screen.
 If you press OKbutton when a next event is high-
lighted, a reminder is set for the highlighted
programme and a clock icon appears across the
highlighted channel line as shown in the following
EPG menu figure.
Programme reminders is set to signal that a
programme is about to start when you are watching
another channel. If you set reminder to a programme,
 
						

							
English-12-
then you will be asked for switching to that channel
when the reminder time is reached.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten2. BBC TWO Driven Crazy Clifford The Big Red Dog
5. five The Chart Dawson’s Creek
Navigate Schedule
Reminder More
Electronic Programme Guide Wed 31/7 09:13
1RTL
OK
5. FIVE The Chart Dawson’s Creek
II
BLUEbutton you can view the ex-
tended schedule of the programmes.
 By pressing the
button you can see the detailed
help information easily. And by pressing
button
again you can exit Help menu.
By pressing the BLUEbutton, the following EPG Menu
appears on the screen.
1. BBC ONE
2. BBC TWO
5. Five
7. BBC Choice
11.DISCOVERY
15.BBC NEWS 24
17.BBCi
IMoreAdvance Day
Electronic Programme GuideWed 21/4 10:12
No Information AvailableBBC ONE TUE 21/4, 20:00-22:00
Navigate Change Time
 YELLOW / BLUE button, you can ad-
vance the schedule backward / forward of a day.
 GREEN / RED buttons you can change
the schedule time.
 If you press
button you can see the detailed help
information easily. And by pressing
button again
you can exit Help menu.
Displaying The Subtitles
With Digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles. Subtitles
can be displayed when watching these programmes.
 Whenever GREENbutton is pressed, Subtitle selec-
tion OSD will be displayed on the screen. You can
set Subtitles as ONorOFF . For Subtitle Language
options, refer to “Language Settings” in the “Con-
figuration Menu” section.
TELETEXT
Use of teletext and and its functions are identical to
the analogue text system. Please do refer to the “Ana-
logue teletext” explanations.
IDTV Menu System
The IDTV Menu can only be shown when watching
Digital terrestrial broadcasting. Press the TV/DTTbut-
ton to turn the IDTV on while TV is in the analogue
mode.
Press
button.
The menu below appears on the screen:
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Channel List
Usingorbuttons on the remote control in Main
menu, make sure that the first item, Channel List, is
highlighted and press the OKbutton to display the
Channel List .
The following operations can be performed in this
menu:
1. Navigating the whole list of channels
2. Moving channels*
3. Deleting channels
4. Renaming channels
5. Adding locks to channels
6. Setting favourites
*Depending on your selection of Country in the
first time installation, “MOVE” option of the
Channel List may not be visible.
Channel List is the place where the channels are
managed.
SELECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Function Select Channel Watch More
1 BBC ONE
OKi
Delete Edit Name Lock Favourites
 
						

							
English-13-
Navigating the whole channel list
orkeys for selecting the previous or
next channel.
 You can press
orbuttons to move page up or
page down.
 To watch a specific channel, highlight it using
or
buttons and then press OKbutton, while the
“Select” item on Channel List menu is highlighted
via using
orbuttons.
Moving the channels in the channel list
orbuttons to select the channel that
will be moved.

orbuttons to select the ‘’ Move’’ item on
Channel List menu.
“Move” is written next to “OK” item to indicate that
press OKto move the highlighted channel to the de-
sired position on the channel list.
SEL E CTiOK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Func tion Sel ectChannel MoveMore
1 BBC ONE
SelectDelete Edit Name L o ck Favourites
Move
 OKbutton, the selected channel becomes
highlighted.

orbuttons to select the new position of
the channel and press OKbutton to place the chan-
nel to the selected position and return the menu.
Deleting the channels in the channel list
orbuttons to select the channel that
will be deleted.

orbuttons to select the ‘’ Delete’’ item on
Channel List menu.
As seen on Channel List menu, “Delete” is written
next to OKitem at the bottom of the screen to indicate
that press OKbutton to delete the highlighted channel
in the channel list.
SEL ECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Function Select Channel Delete More
1 BBC ONE
OKi
Delete Edit Name Lock Favourites
PressOKbutton to delete the highlighted channel in
the channel list. Then the message below appears on
the screen.
The selected service will be permanently deleted, and
favourite list will be turned off. Are you sure?
Yes No
orbuttons to highlight the desired op-
tion.
 OK button is pressed while “Yes” is highlighted,
the highlighted channel is deleted.
 Selecting “No” cancels the delete operation.
Renaming channels
To rename a specific channel, the channel must be
highlighted via pressing
orbuttons and then
highlight the “Edit Name” item by pressing
orbuttons. Press OKbutton to activate rename feature.
SELEC T
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Function Select Channel Edit Name More
1BBCONE
OKi
Delete Edit Name Lock FavouritesSele ct
Now pressingorbuttons moves to the previ-
ous/next character. Pressing
orbuttons
toggles the current character, i.e., ‘ b’character be-
comes ‘ a’on
and ‘ c’on. Pressing the numeric
buttons ‘ 0...9’replaces the highlighted character with
the characters printed above the key one by one as
the button is pressed.
 
						

							
English-14-
Press thebutton to cancel the editing or OKbutton
to save the new name.
Adding locks to channels
Channel Locking provides a password-protected ac-
cess to channels selected by parents.
In order to lock a channel you should know the Paren-
tal Lock password (default value is set to 0000 in the
factory and can only be changed from the Configu-
ration Menu ).
By pressing
orbuttons, highlight the channel
to be locked and select the “Lock”option by press-
ing
orbuttons.Then press the OKbutton, a
password box is displayed.
SELECT
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select
Function Select Channel Lock/UnlockMore
1BBCONE
OKi
Delete Edit Name
LockFavourites
Enter Lock Key
Setting Favourites
You can set various channels as favourites so that
only the favourite channels are navigated. To set a
favourite you should highlight the “ Favourites”item
at bottom of the Channel List menu.
To set a favourite you should highlight the
“ Favourites ” item at bottom of the Channel List menu,
and then pressing OKkey, Edit Favourite Lists menu
appears on the screen.
You can list your favourite channels using List 1, List
2, List 3, List 4 or List 5.
Using 5 lists enables listing channels for diffrerent
categories (sport, music etc.). And by activating the
favourites list number that you want in Favourite
Mode submenu of Configuration menu, you enable
only the channels in the selected list. Configuration
menu is entered from the Main Menu.
SELECTiOK
CHANNEL LIST
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
Select List Select Channel Add/Remove More
List 1 List 2 List 3 List 4
List 5
How To Add A Channel To A Favourite List:
/buttons, highlight the channel
that you want to add to the favourite list.
 Select the list number by pressing
/buttons.

button, the highlighted channel is
added to selected list number.
For each channel, an icon indicates which favourite
list a channel is in. (i.e. In figure above,
icon
indicates that BBC ONE is added to List 1.)
To remove any channel that is added to a
favourite list:
 Highlight the channel that you want to remove from the favourite list you have added;
 Highlight the list number that the channel will be removed, and press OKbutton. The icon indicating
the added list number disappears on the menu.
Note: A channel can be added to more than one
favourite list.
To a c t i v a t e Favourites , go to the Configuration menu
and select the list number in Favourite Modeyou
want to activate by pressing
orbuttons. To To
cancel Favourites, set Favourite Modeto Off.
Using
BLUEbutton to navigate through thefavourite channels:
You can navigate through the favourite channel lists
via pressing BLUEbutton. For each pressing of BLUE
button, you can navigate through the favourite chan-
nels that are top of the each channel list, sequentially.
While a channel list is selected, you can navigate
through the favourite channels in that list by pressing
P+ orP- buttons.
On Screen Help Pressing INFO Button
For all menus pressbutton to display the help
information about the menu functions. For Channel
List menu the following message is displayed on the
screen.
 
						

							
English-15-
Press the SELECT button onyour remote control to tune to the
highlighted channel.
Press MENU to exit this screen.
Hint:
Entering More item pressing
button gets
quick and easy use of the all menus in IDTV
displaying information for the highligted menu
item.
Installation
The Installation menu mainly intends to help you for
building a Channel Table in most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
This menu includes the following items: 1. Automatic Search
2. Manual Search
3. First Time Installation
Installation
Automatic Search
Manual Search
First Time Installation
Automatic Search:
Automatic search is started by pressing OKbutton
while Automatic Search item is highlighted.
The following message appears on the screen.
Please check antenna connection. Do you want to start
automatic search? Yourprevious channel list will be....
Ye sNo
Highlight “Yes” or “No” via usingorbuttons
and press OKbutton to select.
If “Yes” is selected, Automatic Search is started.
Selecting “No” cancels Automatic Search.
After search is completed for digital channels, a mes-
sage asking search for analogue channels appears
on the screen.
Ye s
Do you want to search for
analogue channels?
No
Highlight “Ye s” and press OKbutton to searh for
analogue channels.The following menu appears on
the screen for analogue channel search.
AUTO PROGRAM
Country UKTe x t l a n g u a g e W e s t
Select your Language, Country and Text language by
using
a/band_/`buttons. Press OKbutton to
continue. To cancel, press BLUEbutton.
APS is running...
Cancel
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned to
the programmes.
If you do not accept the locations and / or the
rogramme names, you can change them in aps sub-
menu in the settings menu.
All the services are searched and a channel table is
created automatically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
 
						

							
English-16-
Manual Search:
InManual Search , the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level, signal quality and network name are
shown at the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
First Time Installation
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight “First Time In-
stallation” menu item and press OKbutton, then you
will be asked to tings. Selecting “Yes” by pressing OK
button while the “Yes” is highlighted and then the
existing channel table will be deleted.
Are you sure you want to delete all channels and
settings for first time installation?
Ye sNo
After factory settings is loaded, “ FirstTimeInstal-
lation ” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using
orbuttons, select the desired language option, and press
OK button to activate.
After the language is selected, a message asking for
automatic search start appears on the screen.
Do you want to start automatic search?
Ye sNo
Highlight “Yes” item by pressingorbuttons and
press OKbutton to start installation. After search is
completed for digital channels, a message asking
search for analogue channels appears on the screen.
Ye s
Do you want to search for
analogue channels?
No
Highlight “Ye s”itembypressingorbuttons and
press OKbutton to searh for analogue channels.The
following menu appears on the screen for analogue
channel search.
AUTO PROGRAM
Cou nt ryUKText languageWest
By pressingorbutton, adjust the Countryitem
and press
to highlight Languageitem. Useor
button to set Language.Useorbuttons to
select TXT Language and set it by usingorbuttons. PressOKbutton to continue.
Configuration
Pressbutton to display the Main Menu and thebutton twice to highlight Configuration, then press OK
button to display the Configuration menu. Press
button to exit the menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
The various configuration functions are displayed in
a list, along with a quarter-screen image of the cur-
rently selected channel. You can select a function by
highlighting the corresponding menu line using the
orbuttons.
 
						

							
English-17-
Configuration
Fav ourite Mode
Channel Lis t
Lan
guageSettings
Time Settings
Receiver Upgrade
iChange Favouri te Mod e More
Tv Only
V. 0 . 7 ( E U )Off
Parental Settings
OKSel ect Mode
4ArteCountry : Germany
MENUExit
Favourite Mode
This function enables or disables the favourite chan-
nel list mode.
Use
orbuttons to set Favourite Mode to “List 1,
List 2,..., List 5 or Off”.
Selecting “Off”disables the favourite channel List
mode.
If the “Favourite Mode” is set on via selecting a
channel list number, in normal operating mode press-
ing P+ and P-buttons will only navigate through the
channels that were previously defined as favourites
in the selected channel list.
Channel List
In the Configuration Menu, highlight the Channel Listitem
by pressing
orbuttons.
Use the
orbuttons to set the Channel Listto
“TV only or Radio only”.
This feature enables navigation only through the se-
lected channel list type.
If “Radio only” is set, you can only navigate through
the Radio channels in the channel list via using P+or
P- buttons.
Language Settings
In the configuration Menu, highlight the Language Set-
tings item by pressing
orbuttons. Press OK
and Language Settings sub menu will be displayed on
the screen:
Audio Language
Subtitle Language System Language
EnglishEnglishEnglish
Off
Useorbuttons to highlight the menu item that
will be adjusted.
System Language
System Language determines the on-screen menu
language.
Use
orbuttons to set the System Language
setting. Au d i o L an g u a g e
Digital terrestrial television channels can broadcast
simultaneous sountracks in more than one language.
This function selects which language soundtrack you
will hear when switching to a channel broadcasting
with the multiple soundtracks.
Use
orbuttons to cycle through the language
options.
 Whenever YELLOWbutton is pressed, Audio Lan-
guage selection OSD will be displayed on the screen.
Subtitle Language
Digital terrestrial television channels can broadcast
with subtitles displayed on-screen for the hard-of-
hearing. This function selects the desired subtitle lan-
guage and enables the automatic display of subtitles
whenever subtitle information is broadcast.
Use
orbuttons to cycle through “Off”and
language options.
Parental Settings
Some channels broadcast material which you do not
want younger members of the family to watch. Any
channel can be ‘locked’ so that it cannot be selected
for viewing without first a four-digit PIN code being
entered. In this way any channel not suitable for
younger viewers can be protected.
This function enables or disables the menu protection
system and allows the PIN code to be changed. Chan-
nel And Menu Protection Lock feature.
Use
orbuttons to highlight Parental Settings.
Press OKbutton to enter Parental Settings Menu. A
box asking for the lock key is displayed.
Enter Lock Key
There is only one key which is set to “0000” initially.
Enter lock key. If wrong Lock key is entered, the fol-
lowing message is displayed on the screen and it is
returned back.
Wrong Lock Key
If it is correct, the Parental Settings Menu including
following items is displayed:
Menu LockInstallation
Set Lock Key Maturity Lock
Age5
Useorbuttons to highlight the menu item that
will be adjusted.
 
						

							
English-18-
Maturity Lock:
Use or buttons to set Maturity Lock to the “Off, Age 4,
Age 5...........Age17 or Age 18”. (“Off, Age 4, Age
5,..., Age 18, above 6 years, Universal viewing (FRA)
or X-rated ESP”.)
Menu Lock:
There you can set/reset locking for the Main Menu or
the Installation Menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system.
Off:All menus are unlocked.
Main Menu: Main menu is accessible only with the
correct lock key. So the user cannot add, delete, re-
name, move channels, cannot set timers.
Installation: Installation menu is locked, so the user
cannot add channels.
Changes will be updated after exiting Configuration
Menu.
Set Lock Key:
Also in this menu you can change the lock key and
set/change parental lock mode.
Time Settings
In the configuration Menu, highlight the Time Settings
item by pressing
orbuttons. Press OKand
Time Settings sub menu will be displayed on the screen:
TimeZoneSetting
Time Zo ne Current Time
14:26
Auto
GMT +0
Useorbuttons to highlight the Time Zone
Setting. Time Zone Setting is set using
orbut-
tons. It can be set to AUTO or MANUAL. W hen AUTO
is selected, Current Time and Time Zone options will
not be available to be set.
If MANUAL option is selected as the Time Zone Set-
ting, Time Zone could be altered:
 pressing
orbuttons select Time Zone.
Use
orbuttons to change the Time Zone be-
tween GMT-12 or GMT+12. Current Time on the top of
the menu list will then change according to the se-
lected Time Zone.
Receiver Upgrade
The IDTV can be upgraded via the configuration menu,
entered from the main menu.
Configuration
Favourite Mode
Channel List
Language Settings
Time Settings
Receiver Upgrade
iMore
Tv Only
V. 0 .7 ( E U )Off
Parental Settings
OKSearch for Upgrade
4Arte
MENUExit
Country:UK
In the configuration menu, highlight the “Receiver
Upgrade” item by pressing
orbuttons and
press “OK” button to start upgrade process. The
following menu appears on the screen.
Software Upgrade
Searchingfor upgrade. Please wait,orpress
MENU to cancel.
Search Progress:
After the search progress is completed, the message “
Completed searching for upgrade. No new soft-
ware was found” appears on the screen if no new
software is found.
Timers
Display the Main Menu by pressing thebutton.
Highlight the Timersline by pressing
orbut-
tons and press OKbutton to display the Timer menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Up to five separate timer events can be set and each
is displayed in the Programme Timers screen, show-
ing the event number, the channel to be selected, the
start time, end time, date and the mode - whether that
event is active (and will be acted on) or not.
 
						

							
English-19-
iMEN U
Programme TimersNo Channel Name Start End Date Mode
1. ITV 1 20:0 0 21:0 0 12/05/2 005 Active
2. BBC ONE 00:00 00:00 01/01/2005 Inactive
3. BBC ONE 00:00 00:00 01/01/2005 Inactive
4. BBC ONE 00:00 00:00 01/01/2005 Inactive
5. BBC ONE 00:00 00:00 01/01/2005 Inactive
6. BBC ONE 00:00 00:00 01/01/2005 Inactive
Move/ChangeExit Edit Timer MoreOK
10:42
04/07/2005
 To set an event, highlight its mode button usingor
buttons and press OKbutton to display the timer
entry window.
Ty pe:
Name:
Start:
End:
Date:
Mode:TV
3. ITV
00:00
00:00
03/06/2005
Once
 Here the six settings of channel type, channel name, start time, end time, date and frequency mode can
be set. You can move freely between each setting
using
orbuttons.
 The channel type is set using
orbuttons. It
enables displaying only the selected type channels.
 The channel name is set using
orbuttons to
display the channel which broadcasts the
programme.
 The start time, end time and date are each set with the number buttons on the remote control in 24-hour
format.
 The frequency mode determines how often the re- ceiver operates this event and is set with the
or
buttons to be either Once,Daily ,orWeekly .
HintIf an invalid number for the start or end times
or the date is entered, “Entered time is no t
valid” message appears on the menu.
TV Setup
To be able to go through TV functions, you can use
this item.
The digital TV Setup menu screen is accessed from
the Main Menu. Press the
button to display the
Main Menu and use
orbuttons to highlight “TVSetup”
.Press OKbutton to display TV Setup menu
screen.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
Detailed information for all menu items is in Analogue
TV Menu System section.
Common Interface
button to display the Main Menu and use
the
orbuttons to highlight the “Common
Interface” line and press OKbutton.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial broad-
casting. Obtain the Conditional Access Module (CAM)
and the Viewing card by subscribing to a pay chan-
nel company, then insert those to the Television using
the following procedure.
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, then Viewing Card to the slot that is
located in the terminal cover at the left-hand side
of the TV (from front view).
 The CAM should be correctly inserted, it is impos- sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch on and then wait for few moments until the card is acti-
vated.
 Some CAMs may require the following set up. Please set the CAM by entering the IDTV menu, Common
Interface then pressing OKbutton. (CAM set up menu
is not displayed when it is not required.)