Hitachi L32h01 Instructions For Use

-10-
Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1-Connect the power cord to the system. Press Power
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the  -P/CH
or  P/CH+  button on the TV or press the P+orP-
button on the remote control, so that last mode
switched off is selected.
By either method the...

-11-
Country
Language
UKOk
Cancel
PLEASE CHECK ANTENNA CABLEAUTO. PROGRAMMING SYSTEM
TXT Language
Auto Program
By pressing_/`button, adjust the
Countryitem and
pressbto highlight Languageitem. Use_/`button
to set Language .Use
_/`buttons to select TXT
Language and set it by using
_/`buttons. Press
OK button to continue:
UK
P03-C04 63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After AP Sis finalized, a programme list will appear on
the screen. In the programme list you will see the
programme numbers...

-12-
Everyday Operation
Pressing thebutton at any time while watch-
ing television programmes will switch the TV set be-
tween displaying the digital terrestrial television broad-
casting and its normal analogue broadcasting.
Information Banner
Whenever you change channel, using the P-/P+
button or the digit buttons, TV displays the channel
picture along with an information banner at the bottom
of the screen. This will remain on the screen for ap-
proximately three seconds. The information banner
can...

-13-
 If you pressbutton you can see the detailed
help information easily. And by pressing
button
again you can exit Help menu.
 The starting time for EPGis the current time.You can
see the event information for the next two hours. By
pressing
a/bbutton, you can go to the next/
previous hours while Programmes list is highlighted.
 lf you press the OKbutton when a next event is
highlighted, a reminder is set for the highlighted
programme and a clock appears on the screen.
Programme reminders can be set...

-14-
IDTV Menu System
The IDTV menu can only be shown when watching
Digital terrestrial broadcasting. Press the
but-
ton to turn IDTV on while TV is in analogue mode.
Press the
button. The menu below appears on the
screen:
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Channel List
Using thea/bbutton on the remote control in Main
menu, make sure that the first item, Channel List, is
highlighted and press the OKbutton to display the
Channel List .
The...

-15-
SELECTiSELECT
CHANNEL LIST 1 BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTLSelect Delete Edit NameLock Favourites
Function Select Channel Watch More
Now pressing_/`button moves to the previous/
next character. Pressing
a/bbutton toggles the
current character, i.e., ‘ b’character becomes ‘ a’by
band ‘ c’bya. Pressing the numeric buttons ‘ 0...9’
replaces the highlighted character with the charac-
ters printed above the...

-16-
Installation
The Installation menu mainly intends to help you for
building aChannel Table in the most efficient way.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
This menu includes the following items:
1. Add New Channels
2. First Time Installation.
ADD NE W CHANNE LS :
This tuning menu consists of two parts: xAutomatic Search
x Manual Search
Installation
Add New Channels
First Time Installation Automatic Search
Manual Search
Automatic Search
Automatic...

-17-
First of all choose Language,Country and TXT Lan-
guage by using
a/band_/`buttons. This will
affect the sort process in APS. To start APS press OK
button:
UK
P03-C04 63.75 MHz
6%
63.75 MHz
Cancel
APS is running...
After APS is finalized, the programme table will ap-
pear on the screen. In the programme table you will
see the programme numbers and names assigned to
the programmes.
If you do not accept the locations and / or the
programme names, you can change them in the Pro-
gram menu....

-18-
There are two possibilities for Receiver software to
be upgraded:automaticandmanual .
i
CONFIGURATION
Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade
Parental Settings English
Off
Off
Now&Next
V. 1 . 5
Exit More
Automatic Download
Search for New Version
Enabled
MENU
Automatic Download (Automatic upgrade)
Automatic Download
can be enabled or disabled
by pressing
_/`button. If it is enabled, then there are
two ways for automatic upgrade. The first one is
checking the existence...

-19-
Up to five separate timer events can be set and each
is displayed in the Timer screen, showing the event
number, the channel to be selected, the start time, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
SEL E C TiMENU
TIMER MENU
No Channel Name Start End Date Mode
1. ITV 1 20:00 21:00 12/05/2005 Active
2. BBC ONE 00:00 00:00 01/01/2005 Inactive
3. BBC ONE 00:00 00:00 01/01/2005 Inactive
4. BBC ONE 00:00 00:00 01/01/2005 Inactive
5. BBC ONE 00:00 00:00...