Hitachi H 65 Manual

--- 18 ---
10. STANDARD REPAIR TIME (UNIT) SCHEDULES
MODEL 20 40 60 80FixedVariable
H 65SCWork Flow
Switch
Cord Assy
General Assembly
Fixed Cost
Switch
Handle
Front Cover
Lever
0 min.
Cord Assy 10 min.
Others 20 min.Mouth
Mouth Cover
Urethane Ring
Shank Sleeve
DamperCylinder Case
 Assy Front Cover
Lever
Striker
Piston
L-Ring
Connecting
Rod Assy
Needle
BearingGear Cover
Handle
120 min.100
Armature Assy
Ball Bearing
 (6201)
Ball Bearing
(6203)
Counter Gear
Ball Bearing
(6001)
Ball Bearing
(6201)
Ball...

--- 19 --- Assembly Diagram for H 65SC 

--- 20 ---
PARTSH 65SC
: ALTERNATIVE PARTS
ITEM
NO.CODE NO. DESCRIPTIONNO.USEDREMARKS
1 998-423 STOP LEVER 1
2 998-426 NEEDLE ROLLER 1
3 306-437 NYLOCK HEX. SOCKET HD. BOLT M8X30 6
4 998-424 SPRING CASE 1
5 956-975 LEVER SPRING 1
6 998-425 DAMPER (B) 1
7 957-152 FRONT COVER 1
8 956-958 STRIKER 1
9 944-927 L-RING 1
10 944-928 PISTON PIN 1
11 956-957 PISTON 1
12 944-918 PIN D5X15.8 2
13 956-965 DAMPER 1
14 944-936 O-RING 1
15 956-964 SHANK SLEEVE 1
16 956-962 MOUTH COVER 1
17 956-963 MOUTH 1
18 956-961...

--- 21 ---
PARTSH 65SC
ITEM
NO.CODE NO. DESCRIPTIONNO.
USEDREMARKS
52 956-948 COUNTER GEAR 1
53 600-1VV BALL BEARING 6001VVCMPS2L 1
54 960-251 HEX. HD. TAPPING SCREW D5X65 2
55 956-764 SPECIAL WASHER 2
* 56 340-259G STATOR ASS’Y 115V 1 INCLUD.57,63 FOR USA
* 56 340-259E STATOR ASS’Y 220V-230V 1 INCLUD.57,63
57 945-932 BRUSH TERMINAL 2
58 620-1DD BALL BEARING 6201DDCMPS2L 1
59 318-208 HOUSING ASS’Y 1 INCLUD.69,80
60 996-370 FAN 1
* 61 360-286U ARMATURE ASS’Y 115V 1 INCLUD.49,58,60,64 FOR USA
* 61 360-286E...

--- 22 ---
: ALTERNATIVE PARTS*
PARTSH 65SC
ITEM
NO.CODE NO. DESCRIPTIONNO.
USEDREMARKS
* 96 996-438 VINYL TUBE (A) (I.D.7XT0.5X50) 3 FOR USA
* 97 980-063 TERMINAL 1
* 97 992-810 TERMINAL 1 FOR HOL
* 97 930-804 TERMINAL M4.0 (10 PCS.) 1 FOR USA
98 984-750 TAPPING SCREW (W/FLANGE) D4X16 2
99 960-266 CORD CLIP 1
* 100 940-778 CORD ARMOR D10.7 1
* 100 958-049 CORD ARMOR D8.2 1
101 987-707 SEAL LOCK HEX. SOCKET HD. BOLT M6X25 4
8---  
99
Printed in Japan
(990825 N)
601 944-962 COLD CHISEL 410MM (HEX. SHANK...