Hitachi Edpj32 Projector Users Manual

							
21
ENGLISH

Operating
Adjusting the volume
1.Press the VOLUME button on the remote control.
A dialog will appear on the screen to aid you in 
adjusting the volume.
2.Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press 
the VOLUME button again. Even if you do not do anything, the dialog will 
automatically disappear after a few seconds.
Operating
Temporarily muting the sound
1.Press the MUTE button on the remote control. A dialog 
will appear on the screen indicating that you have 
muted the sound.
To restore the sound, press the MUTE button or 
VOLUME button.
Even if you do not do anything, the dialog will 
automatically disappear after a few seconds.
VIDEORGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+- 
						

							
22

Operating
Selecting an input signal
1.Press the INPUT button on the projector.
Each time you press the button, the projector switches 
its input port as below.
 RGB 
 S-VIDEO  VIDEO
 
1.Press the RGB button on the remote control to select 
the RGB port.
RGB
●  When the TURN ON is selected to the AUTO SEARCH item in the OPTION 
menu (44), the projector selects the S-VIDEO port first. If no input is detected 
at the S-VIDEO port, the projector will check the VIDEO port automatically .
1.Press the VIDEO button on the remote control to select 
an input port for the video signal.
Each time you press the button, the projector switches 
its video input port as below.
 S-VIDEO 
 VIDEO
   
Searching an input signal
1.Press the SEARCH button on the remote control.
The projector will begin to check its input ports in order 
to find any input signals.
Then when an input is found, the projector will stop 
searching and display the image.
If no signal is found, the projector will return to the state 
selected before the operation.
RGB  S-VIDEO  VIDEO
   
STANDBY/ON
INPU
T
MENU
LAMP
T E M P
P O W E R
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+- 
						

							
23
ENGLISH

Operating
Selecting an aspect ratio
1.Press the ASPECT button on the remote control. Each time you press the 
button, the projector switches the modes for aspect ratio in turn.
For a 16:9 signal
For a 4:3 signal
● The NORMAL mode keeps the original aspect ratio of the signal.
●  For an HDTV component video signal of 1125i (1080i) or 750p (720p), only 16:9 
mode can be selected.
● Performing the automatic adjustment initializes the aspect ratio setting.
●  While setting the WIDE mode, the correction of keystone distortion is not  effective. (
25, 40)
● Setting the WIDE mode may limit the magnify range. (26)
  For an RGB signal 
NORMAL 
 4:3  16:9 
  
  For a video signal, s-video signal or component video signal 
4:3  16:9  WIDE  MOVIE1  MOVIE2 
  
  For no signal 
4:3  16:9 
  
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+-4:316:9MOVIE1MOVIE2WIDE
16:9MOVIE14:3WIDEMOVIE2 
						

							
24

Operating
1.Press the ZOOM +/- button on the remote control.
A dialog will appear on the screen to aid you in 
adjusting the zoom.
2.Use the ZOOM buttons +/- to adjust the zoom.
To close the dialog and complete this operation, do not 
perform operation for a few seconds.
Adjusting the zoom (magnifying power)
1.Use the focus ring to focus on the picture.
Adjusting the focus
1.Press the AUTO button on the remote control.
Using the automatic adjustment feature
  For an RGB signal 
The vertical position, the horizontal position, the clock 
phase and the horizontal size will be automatically adjusted. And the aspect 
ratio will be automatically selected. 
Make sure that the application window is set to its maximum size prior to 
attempting to use this feature. A dark picture may still be incorrectly adjusted. 
Use a bright picture when adjusting.
  For a video signal or s-video signal 
The video format best suited for the respective input signal will be 
automatically selected. This function is available only when the AUTO mode 
is selected to the VIDEO FORMAT item in the INPUT menu (
39).  
And the aspect ratio will be selected automatically.
  For a video signal, s-video signal or component video signal 
The vertical position and horizontal position will be automatically adjusted.
  For a component video signal 
The aspect ratio will be automatically selected. 
The clock phase will be automatically adjusted.
●  The automatic adjustment operation requires approximately 10 seconds. Also 
please note that it may not function correctly with some input.
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+- 
						

							
25
ENGLISH

Operating
1.Press the POSITION button on the remote control.
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the cursor buttons ▲/▼/◄/► to adjust the picture 
position.
When you want to reset the operation, press the RESET button on the remote 
control during the operation. To complete this operation, press the POSITION 
button again. Even if you do not do anything, the dialog will automatically 
disappear after a few seconds.
●  When this function is performed for a video signal, a certain extra such as a line 
may appear outside a picture.
1.Press the KEYSTONE button on the remote control.
A dialog will appear on the screen to aid you in correcting 
the distortion.
Correcting the keystone distortions
2.Use the cursor buttons ▲/▼ to correct the distortion.
To close the dialog and complete this operation, press 
the KEYSTONE button again. Even if you don’t do anything, the dialog will 
automatically disappear after a few seconds.
●  The adjustable range for correction will vary among inputs. For some signals, 
this function may not work well.
●  While setting the WIDE mode for aspect ratio, the correction of keystone  distortion is not effective. (
23, 36)
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+- 
						

							
26

Operating
1.Press the ON button of MAGNIFY on the remote control. 
The “MAGNIFY” indication will appear on the screen 
(although the indication will disappear after several 
seconds with no operation), and the projector will enter 
the MAGNIFY mode.
Using the partial magnify feature
2.Use the cursor buttons ▲/▼ to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode, 
then use the cursor buttons ▲/▼/◄/►. And to finalize the zoom area, press 
the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF 
button of MAGNIFY on the remote control.
●  The projector automatically exits the MAGNIFY mode when the input signal is 
changed, or when the display condition is changed (automatic adjustment, etc. 
is executed.)
●  Although the keystone distortion condition may vary in the MAGNIFY mode, it  will be restored when the projector exits the MAGNIFY mode.
● Setting the WIDE mode may limit the magnify range. (23, 36)
1.Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen, and 
the projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to 
normal, press the FREEZE button again.
Freezing the screen
●  The projector automatically exits the FREEZE mode when the input signal is  changed, or when one of the projector’s buttons or the remote control buttons 
of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, 
MUTE, KEYSTONE, POSITION and MENU is pressed.
●  If the projector continues projecting a still image for long time, the LCD panel 
might possibly be printed. Do not leave the projector in the FREEZE mode for 
too long.
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+- 
						

							
27
ENGLISH

Operating
1.Press the BLANK button on the remote control.  The 
blank screen will be displayed instead of the screen of 
input signal. Please refer to BLANK item in the SCREEN 
menu. (41)
To exit the blank screen and return to the input signal 
screen, press the  BLANK button again.
Temporarily blanking the screen
●  The projector automatically returns to the input signal screen when the input  signal is changed, or when one of the projector’s buttons or the remote control 
buttons are pressed.
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANKMUTEVOLUMEKEYSTONEPOSITION
ESC ENTERMENU
RESET
ZOOM+-VIDEO RGBSEARCH
FREEZEOFF
ONMAGNIFYASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESET
ZOOM+- 
						

							
28

Multifunctional settings
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, 
SCREEN, OPTION and EASY MENU. Each of these menus is operated using the 
same methods. The basic operations of these menus are as follows.
1.To display a menu
Press the MENU button on the remote control or one of the cursor buttons  
▲/▼/◄/► on the projector. The Advanced MENU or EASY MENU will 
appear.
2.To choose the target menu
Point at one of choices on the menu using the cursor buttons ▲/▼, then 
press the cursor button ► or the ENTER button.
In the Advance menu, when some menu is chosen already and you want to 
choose other menu, please return to the main menu beforehand, using the 
cursor button ◄ or the ESC button before choosing the menu.
(1) EASY MENU → Advanced MENU
 • Regardless of description of this manual, these functions may not work 
correctly with some input.
NOTE
► / ENTER

Advanced MENU(EASY MENU is pointed at.)
▼

EASY MENU
(ASPECT is pointed at.)
EASY MENU
ASPECT
ZOOM
KEYST
ONE
MODE
BRIGHT
CONTRAS
T
COLOR
TINT
SHARPNES
S
WHISPER
MIRROR
RESE
TFILTER TIME
LANGUAGE
4:3                +0                +0 NORMAL
                +0                +0                +0                +0                +3NORMAL
NORMAL
EXECUTE
0h
ENGLISH
Go To Advance Menu...
          EASY MENU
("Go to Advanced Menu... " is pointed at.)
EASY MENU
ASPECT
ZOOM
KEYST
ONE
MODE
BRIGHT
CONTRAS
T
COLOR
TINT
SHARPNES
S
WHISPER
MIRROR
RESE
TFILTER TIME
LANGUAGE
4:3                +0                +0 NORMAL
                +0                +0                +0                +0                +3NORMAL
NORMAL
EXECUTE
0h
ENGLISH
Go To Advance Menu...
VIDEO RGBSEARCH
FREEZEOFFONMAGNIFYASPECT
AUTOBLANK
MUTEVOLUME
KEYSTONE
POSITION
ES
C ENTERMENU
RESET
ZOOM+-
VIDEO RGBSEARCH
FREEZE
OFF
ONMAGNIFY
ASPECT
AUTOBLANK
MUTE
VOLUME
KEYSTONE
POSITION
ES
C ENTE
RMENU
RESE
T
ZOOM+-
RESET button
ENTER button
MENU button
Cursor buttons▲/▼/◄/►
ESC button
ST ANDBY/ON
INPU
T
MENU
LAMP
T E M P
P O W E R
MENU [RGB]:SELECTPICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
Go To Easy Menu... 
						

							
29
ENGLISH

Multifunctional settings
(2) Advanced MENU → One of Advanced menus (ex. SETUP menu)
3.To choose the target item
Point at one of choices on the menu using the cursor buttons▲/▼. In an 
Advanced menu, then press the cursor button ► or the ENTER button.
(1) In the EASY MENU (ex. KEYSTONE) (3) Advanced MENU → EASY MENU
(2) In an Advanced menu (ex. KEYSTONE)
Advanced MENU(PICTURE is pointed at.)
MENU [RGB]:SELECTPICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
UBRIGHT
CONTRAS
T
GAMMA
COLOR TEMP
COLOR
TINT
SHARPNES
S
PROGRESSIVE
MY  MEMORY
+0+0
DEF AULT 1
HIGH+0+0+0
TURN OFF SA VE 1
▼

MENU [RGB]:SELECTPICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U ZOOM
KEYST
ONE
WHISPER
MIRROR
VOLUM
E
100+0
NORMAL
NORMAL
16
Advanced MENU
(SETUP is pointed at.)
► / ENTER

MENU [RGB]:SELECTZOOM
KEYSTONE
WHISPER
MIRROR
VOLUM
E
100+0
NORMAL
NORMAL
16
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
SETUP menu(ZOOM is pointed at.)
Advanced MENU(PICTURE is pointed at.)
MENU [RGB]:SELECTPICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U BRIGHT
CONTRAS
T
GAMMA
COLOR TEMP
COLOR
TINT
SHARPNES
S
PROGRESSIVE
MY  MEMORY
+0+0
DEF AULT 1
HIGH+0+0+0
TURN OFF SA VE 1
▼

► / ENTER

MENU [RGB]:SELECTPICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
Go To Easy Menu...
Advanced MENU
(EASY MENU is pointed at.)
EASY MENU
EASY MENU
(ASPECT is chosen.)
EASY MENU
ASPECT
ZOOM
KEYST
ONE
MODE
BRIGHT
CONTRAS
T
COLOR
TINT
SHARPNES
S
WHISPER
MIRROR
RESE
TFILTER TIME
LANGUAGE
4:3                +0                +0 NORMAL
                +0                +0                +0                +0                +3NORMAL
NORMAL
EXECUTE
0h
ENGLISH
Go To Advance Menu...
▼

▼

► / ENTER

EASY MENU
ASPECT
ZOOM
KEYST
ONE
MODE
BRIGHT
CONTRAS
T
COLOR
TINT
SHRPNESS
WHISPER
MIRROR
RESE
TFILTER TIME
LANGUAGE
4:3                +0                +0 NORMAL
                +0                +0                +0                +0                +3NORMAL
NORMAL
EXECUTE
0h
ENGLISH
Go To Advance Menu...
EASY MENU
(KEYSTONE is chosen.)
MENU [RGB]:SELECTZOOM
KEYSTONE
WHISPER
MIRROR
VOLUM
E
100+0
NORMAL
NORMAL
16
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
MENU [RGB]:SELECTZOOM
KEYSTONE
WHISPER
MIRROR
VOLUM
E
100+0
NORMAL
NORMAL
16
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
Dialog for KEYSTONE
KEYSTONE+0
SETUP MENU(ZOOM is pointed at.) SETUP MENU
(KEYSTONE is pointed at.)
EASY MENU
ASPECT
ZOOM
KEYST
ONE
MODE
BRIGHT
CONTRAS
T
COLOR
TINT
SHARPNES
S
WHISPER
MIRROR
RESE
TFILTER TIME
LANGUAGE
4:3                +0                +0 NORMAL
                +0                +0                +0                +0                +3NORMAL
NORMAL
EXECUTE
0h
ENGLISH
Go To Advance Menu... 
						

							
30

Multifunctional settings
4.To operate
Please follow of the mention concerned in each. In general,
(1) In the EASY MENU, use the cursor buttons ◄/► to operate.
(2) In the Advanced MENU, use the cursor buttons ▲/▼.
5.To return to the previous menu
Press the cursor button ◄ or the ESC button.
(1) One of Advanced Menus (ex. SETUP menu) → Advanced MENU
(2) Dialogs for operation (ex. KEYSTONE) → Advanced MENU
6.To reset
(1)  Each item:
 
Press the RESET button while operating.
(2)  Items of EASY MENU (at a time):
 
Point at “RESET” on the menu using the cursor buttons ▲/▼, then press 
the cursor button ► or the ENTER button. The dialog for reset will appear.
 
Point at “RESET” on the dialog using the cursor button ▲.
(3)  Items of an Advanced MENU:
 
Press the RESET button while pointing the menu name.
 
The dialog for reset will appear.
 
Point at “RESET” on the dialog using the cursor button ▲.
7.To close the menu
Press the MENU button again.
Even if you do not do anything, the operation will complete and the menu will 
disappear automatically after about 10 seconds.
Note that items whose functions are performed simultaneously with operation 
(LANGUAGE, H PHASE, VOLUME etc.) cannot reset.
MENU [RGB]:SELECTPICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U ZOOM
KEYST
ONE
WHISPER
MIRROR
VOLUM
E
100+0
NORMAL
NORMAL
16
Advanced MENU
(SETUP is pointed at.)
MENU [RGB]:SELECTZOOM
KEYSTONE
WHISPER
MIRROR
VOLUM
E
100+0
NORMAL
NORMAL
16
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
SETUP MENU
(KEYSTONE is pointed at.)
◄ / ESC

MENU [RGB]:SELECTZOOM
KEYSTONE
WHISPER
MIRROR
VOLUM
E
100+0
NORMAL
NORMAL
16
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
SETUP MENU
(KEYSTONE is pointed at.)
Dialog for KEYSTONE
◄ / ESC
KEYSTONE+0
PICTURERESETCANCEL