Hitachi Cpx5 Projector Users Manual

5

USB STORAGE
Displaying Thumbnail image
Image files in USB storage can be seen as thumbnail display. Use ▲, ▼, ◄ and ► 
buttons to move a cursor to THUMBNAIL item in Thumbnail menu. Push ENTER 
button on the remote control or INPUT/ENTER button on the projector to decide it.
THUMBNAIL items
ItemDescription
IMAGE
Select image files to display as thumbnail.
1.  Select [IMAGE] using ▲, ▼, ◄ and ► buttons, then push ENTER button on the remote control or INPUT/ENTER button on the projector so that...

5

USB STORAGE
Displaying Thumbnail image (continued)
NOTE 3
•  Up to 999 files can be displayed
•  Files are sorted in the following order.    1) Symbols, 2) Numbers, 3) 
Characters
• File name can be displayed up to 16 characters including file extension.
•  
The characters of following languages can be used for file name. If other 
languages are used, the file name is not displayed properly, but the content 
can be displayed. 
English, French, German, Spanish, Italian, Norwegian, Dutch,...

53

USB STORAGE
Playing Slide show
SLIDE SHOW can displays a full screen image and change it to the next one in 
desired interval time.
Use ▲, ▼, ◄ and ► buttons to move a cursor to SLIDE SHOW item in Thumbnail 
menu. push ENTER button on the remote control or INPUT/ENTER button on the 
projector to decide it.
SLIDE SHOW items
ItemDescription
PLAY
Starts “SLIDE SHOW”.Select [PLAY] using ▲, ▼, ◄ and ► buttons, then push ENTER button on the remote control or INPUT/ENTER button on the projector.
START...

54

USB STORAGE
Playing Slide show (continued)
SLIDE SHOW items (continued)
ItemDescription
MODE
Select SLIDE SHOW playing at ONE TIME or ENDLESS.
1.  Select [MODE] using ▲, ▼, ◄ and ► buttons, then push ENTER button on the remote control or INPUT/ENTER button on the projector, so that [MODE] setting can be selected.
2. Change [MODE] setting using ▲ and ▼buttons.
  ONE TIME ó  ENDLESS (Playing Slide Show      (Playing Slide Show             only one time)                           endless)
3.  Get out...

55

USB STORAGE
Displaying an image in full screen
One selected image file on Thumbnail menu can be displayed in full screen.  
Use ▲, ▼, ◄ and ► buttons to move a cursor to select an image on Thumbnail 
menu.  
Then, push ENTER button on the remote control or INPUT/ENTER button on the 
projector to display the selected image in full screen.  
While in full screen mode, if one of these buttons is pushed one more time, the 
projector is back to Thumbnail display.
1) Button operation for still image
While...

56

USB STORAGE
Displaying an image in full screen (continued)
2) Button operation for motion picture
While motion picture is shown in full screen, the following operation can be made 
from the control panel on the projector or the remote control.
ButtonOperation
UPPause and play motion picture.
Play ó Pause
DOWNPlay motion picture slowly. (half speed)
Play ó Play slowly (half speed) 
RIGHT
Fast-forward motion picture.
                Play ð Fast-forward (2 times)
Fast-forward (8 times)  Fast-forward...

57

Maintenance
Lamp
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact your dealer and tell the lamp type number.
Type number :  DT00781 /  DT00821
Replacing the lamp
1. Turn the projector off, and unplug the power cord....

58

Maintenance
Lamp (continued)
Lamp warning
 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING  ►The projector uses a high-pressure mercury glass lamp. The 
lamp can break with a loud bang, or burn out, if jolted or scratched, handled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition, when 
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and 
for gas containing...

59

Please check and clean the air filter periodically. When the indicators or a 
message prompts you to clean the air filter, comply with it as soon as possible. 
Replace the air filter when it is damaged or too soiled. To prepare a new air filter, 
contact your dealer and tell the air filter type number.
Type number : MU03602
When you replace the lamp, please replace the air filter. An air filter of specified 
type will come together with a replacement lamp for this projector.
Cleaning the air filter...

60

Maintenance
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and 
inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display 
quality. Please take care of the lens, being cautious of handling.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool 
sufficiently.
2. After making sure that the projector is cool adequately, lightly wipe...