Hitachi Cpx4 Projector Users Manual

31
INPUT menu
INPUT menu (continued)
ItemDescription
VIDEO FORMAT The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2)  
Using the ▲/▼ buttons switches the mode 
for video format.
AUTO   ó  NTSC  
ó  PAL  
ó  SECAM 
      N-PAL  ó M-PAL 
ó NTSC4.43 
• This item is performed only for a video signal 
from VIDEO port or S-VIDEO port. 
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals....

32
INPUT menu
INPUT menu (continued)
ItemDescription
RESOLUTION The resolution for the COMPUTER IN input signals can be set on 
this projector.
(1) 
 In the INPUT menu, select the RESOLUTION using the ▲/▼ 
buttons and press the ► button.
The RESOLUTION menu will be 
displayed.
(2)   In the RESOLUTION menu, select the 
resolution you wish to display using the 
▲/▼ buttons. 
Selecting AUTO will set a resolution appropriate to the input 
signal.
(3)   STANDARD  
Pressing the ► or ENTER button when...

33
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or the ENTER button to execute the 
item. Then perform it according to the following table.
ItemDescription
AUTO 
KEYSTONE 
EXECUTE Selecting this item performs the automatic keystone distortion 
correction. Projector automatically corrects vertical keystone 
distortion due to the (forward/backward) setup angle by itself.
This function...

34
SETUP menu
SETUP menu (continued)
ItemDescription
MIRROR Using the ▲/▼ buttons switches the mode for mirror status.
   
NORMAL  
ó  H:INVERT  
ó  V:INVERT  
ó  H&V:INVERT
    
If the  Transition Detector  is TURN ON and MIRROR status is 
changed,  Transition Detector  Alarm (
48) will be displayed when 
projector is restarted after the power switch is turned off. 

35
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below 
can be performed. Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor button or the ENTER 
button to execute the item. Then perform it according to 
the following table.
ItemDescription
VOLUME Using the ▲/▼ buttons adjusts the volume.
High  ó Low
AUDIO Allocates an audio port for an MIU signal.
(1) Press the ▼ button to begin to select.
(2) Use the ◄/► buttons to select an 
Audio port for an MIU signal.
AUDIO...

36
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the 
item. Then perform it according to the following table.
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
�
TÜRKÇE �
POLSKI �
SUOMI �
ENGLISH � FRANÇAIS � DEUTSCH � ESP
AÑOL � ITALIANO
�
NORSK �
NEDERLANDS �
POR TUGUÊS
�
РУ ССКИЙ  � SVENSKA  � ¿—µ �...

37
ItemDescription
START UP Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen  ó ORIGINAL 
ó TURN OFF
          
Feature
MyScreen Screen can be registered by the MyScreen item 
(
below).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the BLANK screen  (
36) after several...

38
SCREEN menu
SCREEN menu (continued)
ItemDescription
MyScreen
(continued) When the registration is completed, the registered screen and the 
following message are displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed: “A capturing error has occurred. Please try again.” 
• This function cannot be selected when the TURN ON is selected 
to the MyScreen Lock item (
 below).
• This function cannot be selected when TURN ON is...

39
SCREEN menu
SCREEN menu (continued)
ItemDescription
SOURCE NAME Each input port for this projector can have a name applied to it.
(1) 
 Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ► button.  
The SOURCE NAME menu will be displayed.
(2)   Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be 
named and press the ► button. Right 
side of the menu is blank until a name is 
specified.  
The SOURCE NAME dialog will be 
displayed.
(3)   The current name will...

40
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the 
item, except for the items LAMP TIME and FILTER TIME. 
Then perform it according to the following table.
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON  ó TURN OFF
When the TURN ON is selected, detecting no signal automatically 
cycles...