Hitachi Cp-X955w Liquid Crystal Projector Users Manual

11
Installation
Example of the projector and screen installation
Determine picture size and projection distance as illustrated below.
How to use foot adjusters
1. Lift up the projector, unlock the foot adjusters.
2. Adjust a viewing angle, and then lock the foot adjusters complete.
3. To adjust the angle slightly, revolve the foot adjusters.Adjust the projection position using the foot adjusters at the bottom of the projector.
View from the top
b
a
View from the sideScreen
Lens center
a: Distance from...

12
Basic operations
To project the picture
1Turn the MAIN POWER switch of the projector on. [ I : ON]
¥ The ON indicator will light up orange.
2Press the STANDBY/ON button.
¥ The ON indicator blinks (green) and then lights (green).
¥ The ON indicator will blink green during warm-up and light up.
3Turn the lens cover lever down.
¥ Lens cover opens.
4Adjust the picture size using the ZOOM button.
5Adjust the focus using the FOCUS button.
(1) Press the FOCUS button.  The on-screen display shown on the right...

13
Basic operations (continued)
To turn off the power
1Press the STANDBY/ON button, for 1 second.
¥ The ON indicator lights up orange and the lamp turns off.  (About 1 minute later), the fan stops and the
indicator blinks orange.
¥ Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in standby
mode.
2Turn the MAIN POWER switch of the projector off. [ª: OFF]
3Turn the lens cover lever up.
¥ Lens cover closes.
21
3
CautionDo not turn off the MAIN POWER switch before...

14
Adjustments and functions
Memory function
Individual memory functions are provided for the VIDEO1, VIDEO2, RGB1 and RGB2 input terminals.
Adjustments are saved after power off.
1Press the MENU () buttons or the MENU ON / OFF
button.
¥ On-screen menus are displayed on the screen.
2Select the menu to be adjusted using the MENU ()
buttons or DISK PAD.
¥ Menu displayed in green is selected.
3Select the item to be adjusted using the MENU ()
buttons or DISK PAD.
¥ Item displayed in green can be adjusted....

15
SET UP
The menu SET UP serves for the change of parameters influencing the picture and for the move picture
position.
RGB signal input VIDEO signal input
Caution¥ Menu items cannot be adjusted, while displaying the start up screen (ÒNO INPUT IS
DETECTEDÓ or ÒSYNC IS OUT OF RANGEÓ).
¥ TINT cannot be adjusted with PAL/SECAM/M-PAL video signal input.
¥ TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.
¥ V.POSIT, H.POSIT, H.PHASE and H.SIZE cannot be adjusted with a VIDEO signal...

16
Adjustments and functions (continued)
INPUT
The menu INPUT serves for the selection of input source.
SETUP INPUT  IMAGE  OPT.
RGB1
RGB2
VIDEO1
VIDEO2
TEST
PATTERNSETUP INPUT  IMAGE  OPT.
RGB1
RGB2
VIDEO1
VIDEO2
TEST
PATTERN
AUTO
NTSC
PAL
SECAM
NTSC4.43
M-PALSYSTEM
Adjustment Item
RGB1
RGB2
VIDEO1
VIDEO2
TEST PATTERN
SYSTEM
Details of adjustment
Selects the RGB 1 terminal.
Selects the RGB 2 terminal.
Selects the VIDEO 1 terminal.
Selects the VIDEO 2 terminal.
Selects the TEST PATTERN. (Start up...

17
Adjustments and functions (continued)
Adjustment Item
MIRROR
BLANK
REVEAL
MESSAGE
OPT. (OPTION)
The menu OPT. allows you to control communication function etc.
SETUP INPUT  IMAGE  OPT.
TURN ON
TURN OFF
MESSAGE
SETUP INPUT  IMAGE  OPT.
COM. SPEED
COM. BITS
TIMER
LANGUAGE
AUTO OFF
START UP
Details of adjustment
Inverts the picture horizontally or vertically.
NORMAL Not invert.
H : INVERT Inverts the picture horizontally.
V : INTERT Inverts the picture vertically.
H&V : INVERT Inverts the picture...

18
Adjustments and functions (continued)
Adjustment Item
COM. SPEED
(COMMUNICATION SPEED)
COM. BITS
(COMMUNICATION BITS)
TIMER
LANGUAGE
AUTO OFF
START UP
SETUP INPUT  IMAGE  OPT.
1200
2400
4800
9600
19200
COM. SPEED
(bps)
SETUP INPUT  IMAGE  OPT.
7N1
8N1
COM. BITS
SETUP INPUT  IMAGE  OPT.
10  min.
TIMER
SETUP INPUT  IMAGE  OPT.
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
NORSK
NEDERLANDSLANGUAGE
SETUP INPUT  IMAGE  OPT.
 0  min.
STOP      
AUTO  OFF
SETUP INPUT  IMAGE  OPT.
TURN ON
TURN OFF START UP...

19
Connection to the video signal terminals
1. Input signal
S-VIDEO signal
VIDEO signal
AUDIO signalInput
Output
2. Signal input terminal
Connection to the RGB signal terminal
1. Input / output signal
Video signal
Horizontal sync signal
Vertical sync signal
Composite sync signal
Audio signalInput
OutputAnalog 0.7Vp-p 75 W termination (Positive polarity)
TTL level (Positive/negative polarity)
TTL level (Positive/negative polarity)
TTL level
200mVrms, 20k W below (MAX 3.0Vp-p)
0 ~ 200mVrms, 1k W
2. Signal...

20
Connection to the RGB signal terminal (continued)
3. Example of computer signal
Resolution
   H ´ V
640 ´ 350
640 ´ 400
640 ´ 400
640 ´ 480
640 ´ 480
640 ´ 480
640 ´ 480
640 ´ 480
800 ´ 600
800 ´ 600
800 ´ 600
800 ´ 600
800 ´ 600
832 ´ 624
1024 ´ 768
1024 ´ 768
1024 ´ 768
1152 ´ 864
1280 ´ 960
1280 ´ 1024
1280 ´ 1024
fH
(kHz)
31.5
24.8
31.5
43.3
31.5
35.0
37.9
37.5
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
67.5
60.0
64.0
80.0fV
(Hz)
70.1
56.4
70.1
85.0
59.9
66.7
72.8
75.0
56.3
60.3
72.2
75.0
85.1...