Hitachi Cp-X605 Projector Users Manual

31
INPUT Menu
INPUT Menu
Item Description
PROGRESSIVE8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHSURJUHVVPRGH
TV
Ù FILM 
Ù TURN OFF
• This function is performed only for an interlaced signal of a VIDEO 
input, an S-VIDEO input or COMPONENT VIDEO input of 525i
(480i), 625i (576i) or 1125i (1080i) signal.
• When TV or FILM is selected, the screen image will be sharp. 
FILM adapts to the 2-3 Pull-Down conversion system. But these 
may cause a certain defect (for example, jagged line) of the picture 
for a quick...

32
Item Description
COMPONENT8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHIXQFWLRQRIWKH&20321(17
(Y, C
B/PB, CR/PR) port.
COMPONENT 
Ù SCART RGB 
When the SCART RGB is selected, the COMPONENT (Y, C
B/PB,
C
R/PR) and VIDEO ports will function as a SCART RGB port. A 
SCART adapter or SCART cable is required for a SCART RGB 
input to the projector. For details, contact your dealer.
VIDEO FORMATSet the video format for the s-video port and video port.
(1) Use thH
{
yEXWWRQVWRVHOHFWWKHLQSXWSRUW
...

33
Item Description
FRAME LOCK8VLQJWKH
x
zEXWWRQVWXUQVWKHIUDPHORFNIXQFWLRQRQRII
TURN ON 
Ù TURN OFF
• This item can be performed only on an RGB signal with a vertical 
frequency of 50 to 60 Hz.
• When the TURN ON is selected, a moving pictures are displayed 
more smoothly.
• This function may cause a certain degradation of the picture. In 
such a case, please select the TURN OFF.
RGB INSet the RGB input signal type for the RGB port.
(1) Use thH
{
yEXWWRQVWRVHOHFWWKH5*%
port to be...

34
INPUT Menu
Item Description
RESOLUTIONThe resolution for the RGB1 and RGB2 input signals can be set on 
this projector.
,QWKH,1387PHQXVHOHFWWKH5(62/87,21XVLQJWKH
x
zEXWWRQVDQG
SUHVVWKH
yEXWWRQ
The RESOLUTION menu will be displayed.
(2)  In the RESOLUTION menu select the 
UHVROXWLRQ\RXZLVKWRGLVSOD\XVLQJWKH
x
z
buttons.
Selecting AUTO will set a resolution 
appropriate to the input signal.
3UHVVLQJWKH
yRU(17(5EXWWRQZKHQ
selecting a STANDARD resolution will...

35
SETUP Menu
SETUP Menu
Item Description
AUTO 
KEYSTONE 
EXECUTESelecting this item performs the Automatic keystone distortion 
correction. Projector automatically corrects vertical keystone 
distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the Menu. 
When the slant of the projector is changed, executes this function again.
• The adjustable range of this function will vary among inputs. For 
some input, this function may not work...

36
SETUP Menu
SETUP Menu (continued)
Item Description
WHISPER8VLQJWKH
x
zEXWWRQVWXUQVRIIRQWKHZKLVSHUPRGH
NORMAL 
Ù WHISPER
• When the WHISPER is selected, acoustic noise and screen 
brightness are reduced.
MIRROR8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHPRGHIRUPLUURUVWDWXV
NORMAL 
Ù H:INVERT 
Ù V:INVERT 
Ù H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is 
changed, Transition Detector Alarm (
	51) will be displayed when 
projector is restarted after the power switch is...

37
AUDIO Menu
AUDIO Menu
Item Description
VOLUME8VLQJWKH
x
zEXWWRQVDGMXVWVWKHYROXPH
High
Ù Low
TREBLE8VLQJWKH
x
zEXWWRQVDGMXVWVWKHWUHEOHOHYHO
High
Ù Low
BASS8VLQJWKH
x
zEXWWRQV adjusts the bass level.
High
Ù Low
SRS WOW8VLQJWKH
x
zEXWWRQV switches the mode for SRS WOW mode.
HIGH
Ù MID 
Ù OFF
• SRS WOW™ accomplishes this by providing a panoramic three-

horizontal and vertical planes, and lowers the perceived bass 
response well beyond the low frequency limitations of the...

38
SCREEN Menu
SCREEN Menu
Item Description
LANGUAGE
8VLQJWKH
x
zEXWWRQVVZLWFKHVWKH262Q6FUHHQLVSOD\ODQJXDJH
SUOMIÙ POLSKI Ù TÜRKÇE ENGLISHÙ FRANÇAIS Ù DEUTSCHÙ ESPAÑOLÙ ITALIANO
NORSKÙ NEDERLANDS Ù PORTUGUÊSÙãÄ.†
Ù Ù Ù SVENSKAÙ
MENU POSITION8VLQJWKH
{
y
x
zEXWWRQVDGMXVWVWKHPHQXSRVLWLRQ
To quit the operation, press the MENU button on the remote control 
or keep no operation for about 10 seconds.
BLANK8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHPRGHIRUWKHEODQNVFUHHQ
The blank...

39
SCREEN Menu
Item Description
START UP8VLQJWKH
x
zEXWWRQVVZLWFKHVWKHPRGHIRUWKHVWDUWXSVFUHHQ
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen
Ù ORIGINAL 
Ù TURN OFF
Feature
MyScreenScreen can be registered by the MyScreen item 
(	40).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the BLANK screen (
	38) after several...

40
SCREEN Menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1. Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from the 
current screen.
Please wait for the target image to be displayed, and press 
the ENTER button on the remote control when the image is...