Hitachi Cp-X300 Projector Users Manual
Here you can view all the pages of manual Hitachi Cp-X300 Projector Users Manual. The Hitachi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
3 INPUT Menu INPUT Menu ItemDescription PROGRESSIVE Using the ▲/▼ buttons switches the progress mode. TV ó FILM ó TURN OFF • This function is performed only for an interlaced signal of a video, s-video or component video of 525i (480i) or 625i (576i) signal.• When TV or FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please...
Page 32
3
ItemDescription
VIDEO FORMAT
The video format for S-VIDEO port and VIDEO port can be set.(1) Use the ◄/► buttons to select the input port.(2) Using the ▲/▼ buttons switches the mode for video format.
AUTO ó NTSC ó PAL ó SECAM
N-PAL ó M-PAL ó NTSC4.43
• This item is performed only for a video signal from VIDEO port or S-VIDEO port. • The AUTO mode automatically selects the optimum mode.• The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g....
Page 33
33 INPUT Menu ItemDescription RESOLUTION The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1) In INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal. (3) STANDARDPressing the ► or ENTER button when selecting a STANDARD resolution will...
Page 34
34 SETUP Menu SETUP Menu ItemDescription AUTO KEYSTONE EXECUTE Selecting this item performs the automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. This function will be executed only once when selected in the menu. When the slant of the projector is changed, execute this function again. • The adjustable range for correction will vary among inputs. For some input, this function may not work well.•...
Page 35
35 SETUP Menu SETUP Menu (continued) ItemDescription WHISPER Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When WHISPER is selected, acoustic noise and screen brightness are reduced. MIRROR Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (49) will be displayed when projector is restarted after the power switch is turned off....
Page 36
36 SCREEN Menu SCREEN Menu ItemDescription LANGUAGE Using the ▲/▼ buttons switches the OSD (On Screen Display) language. �TÜRKÇE�POLSKI�SUOMI� ENGLISH � FRANÇAIS � DEUTSCH � ESPAÑOL � ITALIANO�NORSK�NEDERLANDS�PORTUGUÊS�РУССКИЙ � SVENSKA � ¿—µ � 4P¨[ � 1T[ � ãÄ.† MENU POSITIONUsing the ▲/▼/◄/► buttons adjusts the menu position.To quit the operation, press MENU button on the remote control or keep no operation for about 10 seconds. BLANK Using the ▲/▼ buttons switches the mode for the blank...
Page 37
37 SCREEN Menu ItemDescription START UP Using the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreenScreen can be registered by the MyScreen item (38). ORIGINALScreen preset as the standard screen. TURN OFFPlain black screen. • To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK screen (36) after several minutes....
Page 38
38 SCREEN Menu ItemDescription MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen.Please wait for the target image to be displayed, and press the ENTER button when the image is displayed. The image will freeze...
Page 39
39 SCREEN Menu ItemDescription MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching…” while searching for the input “Detecting…” while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ratio displayed by changing The indication of the...
Page 40
40 OPTION Menu OPTION Menu ItemDescription AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search function. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 VIDEO S-VIDEO COMPONENT AUTO KEYSTONE Using the ▲/▼ buttons turns on/off...