Hitachi Cp-X265 Projector Users Guide

6

Troubleshooting
Regarding the indicator lamps (continued)
POWER 
indicator
LAMP 
indicator
TEMP 
indicatorDescription
Blinking
In Red
or
Lighting
In Red
Turned
off
Blinking
In Red
The cooling fan is not operating.
Please turn the power off, and allow the projector to 
cool down at least 0 minutes. After the projector has 
sufficiently cooled down, please make confirmation 
that no foreign matter has become caught in the fan, 
etc., and then turn the power on again.
If the same indication is...

6

Troubleshooting
Phenomena that may be easy to be mistaken for machine defects
WARNING  ►Never use the projector if abnormal operations such as 
smoke, strange odor, excessive sound, damaged casing or elements or cables, 
penetration of liquids or foreign matter, etc. should occur. In such cases, 
immediately turn off the power switch and then disconnect the power plug from 
the power outlet. After making sure that the smoke or odor has stopped, contact 
your dealer or service company.
....

63

Phenomena that may be easy to be mistaken for machine defects (continued)
PhenomenonCases not involving a machine defectReference
page
Sound does not 
come out.
The signal cables are not correctly connected.
Correctly connect the audio cables.,3
The MUTE function is working.
Restore the sound pressing the MUTE or VOLUME button 
on the remote control. 8
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu function 
or the remote...

64

Phenomena that may be easy to be mistaken for machine defects (continued)
PhenomenonCases not involving a machine defectReference
page
Pictures appear 
dark.
The brightness and/or contrast are adjusted to an 
extremely low level.
Adjust BRIGHTNESS and/or CONTRAST settings to a 
higher level using the menu function.5, 6
The WHISPER function is working.
Select NORMAL for the WHISPER item in the SETUP 
menu.
6, 35
The lamp is approaching the end of its product 
lifetime.
Replace the...

65

Warranty And After-Ser vice
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and run 
through the suggested checks. If this does not resolve the problem, please contact your 
dealer or service company. They will tell you what warranty condition is applied.
Specifications
Specifications
NOTE  • These specifications are subject to change without notice.
ItemSpecification
Product nameLiquid crystal projector
Liquid
Crystal
panel
Panel size.6...

66
Specifications
Specifications (continued)
AC  IN
AUDIO IN3
AUDIO IN2
YRLCB/PBCR/PRAUDIO IN1RGB IN1 RGB IN2
LAN
CONTROLRGB OUT AUDIO OUT
USBVIDEOS-VIDEO
306 mm
49 mm
0 mm 06 mm 


Projector
CP-X265
User’s Manual – Network Functions
This manual is only intended to explain Network Functions.
For safety, operations or any other issues, refer to the User’s Manual, Quick Start 
Guide or Safety Guide.
• Before using the network functions, read the User’s Manual 
and Quick Start Guide carefully to ensure your projector is set up corre\
ctly.
• After reading, keep the manuals in a safe place for future reference.
WARNING
• The information in this manual is subject to change without...



Network Functions
Network Functions
Configuring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by \
using a 
web browser from a PC that is connected to the same network.
(4)
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specified e-mail addresses when 
the projector requires maintenance or has encountered an error.
(26)
Projector Management via SNMP
This projector is SNMP (Simple...

3

Network Functions
Before using the network functions…
To use the network functions of this projector, the projector must be configured to 
suit your network. Consult with your network administrator before connec\
ting the 
projector to your network. Incorrect network configuration of this projector may 
cause problems on your network.
Connect to the Gateway (The router/PC that forwards traffic to a destination 
outside of the subnet of the transmitting device) from the network term\
inal on the...

4

Network Functions
Configuring and controlling the projector via a web browser
You can adjust or control the projector via a network from a web browser \
on a PC 
that is connected to the same network.
• Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required.
• If JavaScript is disabled in your web browser configuration, you must enable 
JavaScript in order to use the projector web pages properly. See the Help files 
for your web browser for details on how to enable JavaScript.
• This...