Hitachi Cp-X260 Projector Users Manual
Here you can view all the pages of manual Hitachi Cp-X260 Projector Users Manual. The Hitachi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
3 IMAGE Menu ItemDescription H SIZE Using the buttons ▲/▼ adjusts the horizontal size. Large ó Small • This item can be selected only for an RGB signal. • When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. AUTO ADJUST EXECUTE Selecting this item performs the automatic adjustment feature. For an RGB signalThe vertical position, the horizontal position,...
Page 32
3 INPUT Menu INPUT Menu ItemDescription PROGRESSIVE Using the buttons ▲/▼ switches the progress mode. TV ó FILM ó TURN OFF • This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or COMPONENT VIDEO input of 55i (480i) or 65i (576i) signal. • When TV or FILM is selected, the screen image will be sharp. FILM adapts to the -3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick...
Page 33
33 ItemDescription COMPONENT Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port. COMPONENT ó SCART RGB When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input and VIDEO port function as a port for SCART RGB sync input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, contact your dealer. VIDEO FORMAT Set the video format for the s-video port and video port. () Use the ◄/► buttons to select...
Page 34
34 INPUT Menu ItemDescription RESOLUTION*2 The resolution for the RGB and RGB input signals can be set on this projector. (1) In the INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed. () In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal. (3) Pressing the ► or Enter button when selecting a STANDARD resolution will...
Page 35
35 SETUP Menu SETUP Menu ItemDescription AUTO KEYSTONE EXECUTE Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. • This function will be executed only once when selected in the Menu. When the slant of the projector is changed, executes this function again. • When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is...
Page 36
36 SETUP Menu SETUP Menu (continued) ItemDescription MIRROR Using the buttons ▲/▼ switches the mode for mirror status. NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (48) will be displayed when projector is restarted after the power switch is turned off. VOLUMEUsing the buttons ▲/▼ adjusts the volume. High ó Low AUDIO Allocates the audio ports. Choose a picture input port using the buttons ▲/▼ (1), then select the...
Page 37
37
SCREEN Menu
SCREEN Menu
ItemDescription
LANGUAGE
Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
SUOMI ó POLSKI ó TÜRKÇE
ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語
ó ó ó SVENSKA ó
MENU POSITIONUsing the buttons ◄/►/▲/▼ adjusts the menu position.To quit the operation, press the MENU button on the remote control or keep no operation for about 0 seconds.
BLANK
Using the buttons ▲/▼ switches the mode for the blank...
Page 38
38
SCREEN Menu
ItemDescription
START UP
Using the buttons ▲/▼ switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.MyScreen ó ORIGINAL ó TURN OFF
MyScreen is a screen you can register as a desired screen.The ORIGINAL screen is the existing standard screen. When TURN OFF is selected, the BLACK screen is used.• To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen...
Page 39
39 SCREEN Menu ItemDescription MESSAGE Using the buttons ▲/▼ turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting”NO INPUT IS DETECTED””SYNC IS OUT OF RANGE”"Searching….” while searching for the input”Detecting….” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ration displayed by changingThe indication of the My...
Page 40
40 OPTION Menu OPTION Menu ItemDescription AUTO SEARCH Using the buttons ▲/▼ turns on/off the automatic signal search function. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. RGB IN ð RGB IN ð COMPONENT VIDEO ð S-VIDEO ð VIDEO AUTO KEYSTONE Using the buttons ▲/▼ turns...