Hitachi Cp-X2520 Projector Users Manual

22
1.Press the MAGNIFY ON button on the remote control. The 
picture will be magnied, and the MAGNIFY dialog will appear 
on the screen. When the MAGNIFY ON button is pressed for 
the rst time after the projector is turned on, the picture will be 
zoomed by 1.5 times. On the dialog, triangle marks to show 
each direction will be displayed.
Using the magnify feature
2.While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor buttons 
to shift the magnifying area.
MAGNIFY
ON/OFF button...

23
Operating
1.Press the BLANK button on the control panel or the remote 
control. 
The BLANK screen will be displayed instead of 
the screen of input signal. Please refer to BLANK item in 
SCREEN menu (
	39).
To exit from the BLANK screen and return to the input signal 
screen, press BLANK button again. 
Temporarily blanking the screen
●  The projector automatically exits from theBLANK mode 
when some control buttons are pressed.
●  You can change the function assigned to the BLANK 
button on the...

24
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)  Use the ◄/► cursor buttons to operate the item. This projector has the following menus:  
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, SECURITY and 
EASY MENU....

25
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select EXIT and press 
the ◄ cursor button or ENTER button. Even if you do not do anything, the 
dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the cursor buttons after pressing the 
POSITION button.
●  Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed.
●  When you want to reset...

26
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
Item Description
ASPECTUsing the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE

menu
 (	31).
AUTO KEYSTONEUsing the ► button executes the auto keystone function.See the AUTO KEYSTONE item in SETUP menu (	36).
KEYSTONEUsing the ◄/► buttons corrects the vertical keystone distortion.
See the...

27
EASY MENU
Item Description
ECO MODEUsing the ◄/► buttons turns off/on the eco mode.
See the ECO MODE item in SETUP menu
 (	37).
MIRRORUsing the ◄/► buttons switches the mode for mirror status.
See the MIRROR item in SETUP menu
 (	37).
RESETPerforming this item resets all of the EASY MENU items except the 
FILTER TIME and LANGUAGE.
A dialog is displayed for conrmation. Selecting the OK using the 
► 
button performs resetting.
FILTER TIMEThe usage time of the air lter is shown in the menu.
Performing...

28
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
BRIGHTNESSUsing the 
◄/► buttons adjusts the brightness.
Dark 
Ù Light
CONTRASTUsing the 
◄/► buttons adjusts the contrast.
Weak 
Ù Strong
GAMMAUsing the ▲/▼ buttons switches the gamma mode.
To adjust CUSTOM
Selecting a mode...

29
PICTURE menu
Item Description
COLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button 
or the ENTER button displays a dialog 
to aid you in adjusting the OFFSET and 
GAIN of the selected mode.
OFFSET adjustments change the color intensity 
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity 
on the brighter tones of the test pattern.
Choose an item using the ◄/►...

30
PICTURE menu
Item Description
MY MEMORY
This projector has 4 memories for adjustment data (for all the items 
of the PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or 
ENTER button performs each function.
SAVE-1 
Ù SAVE-2 
Ù SAVE-3 
Ù SAVE-4
LOAD-4 
ÙLOAD-3 
Ù LOAD-2 
Ù LOAD-1
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into 
the memory linked in the number included in the function’s name. 
• Remember that the current data...

31
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
ASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL 
Ù 4:3 
Ù 16:9 
Ù 16:10
          
For a video signal, s-video signal or component video signal
4:3 
Ù 16:9 
Ù 14:9
     
For no signal...