Home > Hitachi > Projector > Hitachi Cp-X2511 Projector Users Manual

Hitachi Cp-X2511 Projector Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Hitachi Cp-X2511 Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							41
    SCREEN menu
    ItemDescription
    C.C.
    (Closed Caption) The C.C. is the function that displays a 
    transcript or dialog of the audio portion of 
    a video, files or other presentation or other 
    relevant sounds. It is required to have NTSC 
    format video or 480i@60 format component 
    video source supporting C.C. feature to 
    utilize this function.
    It may not work properly, depending on equipment or signal source. 
    In this case, please turn off the Closed Caption.
    DISPLAY
    Select Closed Caption DISPLAY setting from following options 
    using ▲/▼ buttons.
    AUTO  ó ON 
    ó OFF 
       
    AUTO :   Closed Caption automatically displays when the volume 
    is muted.
    ON : Closed Caption is on.
    OFF  : Closed Caption is off.
    • The caption is not displayed when the OSD menu is active.
    • The Closed Caption is the function to display the dialogue, 
    narration, and / or sound effects of a television program or other 
    video sources. The Closed Caption availability is depending upon 
    broadcaster and/or content.
    MODE
    Select Closed Caption MODE setting from following options using 
    ▲/▼ buttons. CAPTIONS  ó TEXT
    CAPTIONS : Display Closed Caption.
    TEXT  :  Display Text data, which is for additional information such 
    as news reports or a TV program guide. The information 
    covers the entire screen. Not all of the C.C. program has 
    Text information.
    CHANNEL
    Select Closed Caption CHANNEL from following options using ▲/▼ 
    buttons.
    1 ó  2 
    ó 3 
    ó 4
    1: Channel 1, primary channel / language
    2: Channel 2
    3: Channel 3
    4: Channel 4
    The channel data may vary, depending on the content. Some 
    channel might be used for secondary language or empty. 
    						
    							42
    OPTION menu
    OPTION menu
    From the OPTION menu, items shown in the table 
    below can be performed.
    Select an item using the ▲/▼ cursor buttons, and 
    press the ► cursor button or ENTER button to 
    execute the item, except for the items LAMP TIME 
    and FILTER TIME. Then perform it according to the 
    following table
    ItemDescription
    AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search 
    function.
    ON  ó OFF
    When the ON is selected, detecting no signal automatically cycles 
    through input ports in the following order. The search is started from 
    the current port. Then when an input is found, the projector will stop 
    searching and display the image.      COMPUTER IN1   ð  COMPUTER IN2 
    VIDEO    S-VIDEO 
     
    COMPONENT
     (Y, Cb/Cr, Cr/Pr)
    AUTO 
    KEYSTONE
    Using the ▲/▼ buttons turns on/off the automatic keystone function.
    ON  ó OFF
    ON :   
    Automatic keystone distortion correction will be executed 
    whenever changing the slant of the projector.
    OFF  :   This function is disabled. Please execute the AUTO 
    KEYSTONE (EXECUTE) in the SETUP menu for automatic 
    keystone distortion correction.
    • When the projector is suspended from the ceiling this feature will 
    not function properly so select the OFF.
    • This function will be unavailable when the Transition Detector is 
    on 
    ( 50).
    DIRECT ON Using the ▲/▼ buttons turns on/off the DIRECT ON function.
    ON  ó OFF
    When set to the ON, the lamp in projector will be automatically 
    turned on without the usual procedure  (
    14), only when the 
    projector is supplied with the power after the power was cut while 
    the lamp was on.
    • This function does not work as long as the power has been 
    supplied to the projector while the lamp is off.
    • 
    After turning the lamp on by the DIRECT ON function, if neither 
    input nor operation is detected for about 30 minutes, the projector is 
    turned off, even though the AUTO OFF function (
     43) is disabled.
    (continued on next page) 
    						
    							43
    OPTION menu
    ItemDescription
    AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to 
    automatically turn the projector off.
    Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
    When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
    signal or an unsuitable signal reaches at the set time, the projector 
    lamp will be turned off. 
    If one of the projector's buttons or the remote control buttons 
    is pressed or one of the commands (except get commands) is 
    transmitted to the CONTROL port during the corresponding time, 
    projector will not be turned off.
    Please refer to the section “Turning off the power”
     ( 14).
    LAMP TIME The lamp time is the usage time of the lamp, counted after the last 
    resetting. It is shown in the OPTION menu.
    Pressing the RESET button on the remote control or the ► button 
    of the projector displays a dialog. 
    To reset the lamp time, select the OK using the ► button.
    CANCEL
     ð  OK
    • Please reset the lamp time only when you have replaced the lamp, 
    for a suitable indication about the lamp.
    • For the lamp replacement, see the section "Replacing the lamp"  
    (
     53, 54).
    FILTER TIME The filter time is the usage time of the air filter, counted after the last 
    resetting. It is shown in the OPTION menu.
    Pressing the RESET button on the remote control or the ► button 
    of the projector displays a dialog. 
    To reset the filter time, select the OK using the ► button.
    CANCEL
     ð  OK
    • 
    Please reset the filter time only when you have cleaned or replaced 
    the air filter, for a suitable indication about the air filter.
    • For the air filter cleaning, see the section “Cleaning and replacing 
    the air filter” (
     55, 56).
    (continued on next page) 
    						
    							44
    OPTION menu
    ItemDescription
    MY BUTTON This item is to assign one of the following functions to 
    MY BUTTON 
    1/2 on the remote control (
     6).
    (1)   Use the ▲/▼ buttons on the MY BUTTON menu to select a 
    MY BUTTON - (1/2) and press the ► button to display the MY 
    BUTTON setup dialog. 
    (2)   Then using the ▲/▼/◄/► buttons sets one of the following 
    functions to the chosen button. Press the ENTER or INPUT 
    button to save the setting.
    • COMPUTER IN1: Sets port to  COMPUTER IN1.
    • COMPUTER IN2: Sets port to  COMPUTER IN2.
    • COMPONENT: Sets port to  COMPONENT (Y, Cb/Pb, Cr/Pr) .
    • S-VIDEO: Sets port to  S-VIDEO.
    • VIDEO: Sets port to  VIDEO.
    •   INFORMATION: Displays the INPUT_INFORMATION  (
    46) or 
    the SYSTEM_INFORMATION or nothing.
    •    AUTO KEYSTONE : Performs automatic keystone distortion 
    correction (
     34).
    •   MY MEMORY: Loads one of adjustment data stored  (28). 
    When more than one data are saved, the adjustment   
    changes every time the  MY BUTTON is pressed.
    When no data is saved in memory, the 
    dialog "No saved data" appears.
    When the current adjustment is not 
    saved to memory, the dialog as shown in 
    the right appears.
    If you want to keep the current adjustment, please press   
    the ► button to exit. Otherwise loading a data will overwrite the 
    current adjusted condition.
    •    ACTIVE IRIS: Changes the active iris mode. 
    (This function does not apply to the  CP-X2011.)
    • PICTURE MODE: Changes the PICTURE MODE (
     24).
    •   FILTER RESET: Displays the filter time reset confirmation dialogue 
    (
     43).
    •    TEMPLATE: Makes the template pattern selected to the 
    TEMPLATE item
     (
    
    40) appear or disappear.
    •    AV MUTE: Turns the picture and audio on/off.
    MY SOURCE
    Using ▲/▼ buttons selects the picture input port to be selected with 
    pressing the  MY SOURCE/DOC.CAMERA  button on the remote 
    control.
    Select the picture input that is connected with a document camera.
        COMPUTER IN1  ó COMPUTER IN2 
        VIDEO  ó S-VIDEO 
    ó COMPONENT
    (continued on next page) 
    						
    							45
    OPTION menu
    ItemDescription
    SERVICE Selecting this item displays the SERVICE 
    menu.
    Select an item using the ▲/▼ buttons, 
    and press the ► button or the ENTER 
    button on the remote control to execute 
    the item.
    FAN SPEED
    Using the ▲/▼ buttons switches the rotation speed of the cooling 
    fans. The HIGH is the mode for use at highlands etc. Note that the 
    projector is noisier when the HIGH is selected.
    HIGH  ó NORMAL
    AUTO ADJUST
    Using the ▲/▼ buttons to select one of the mode. When the 
    DISABLE is selected, the automatic adjustment feature is disabled.
    FINE  ó FAST 
    ó DISABLE
       
    FINE: Finer tuning including H.SIZE adjustment.
    FAST :  Faster tuning, setting H.SIZE to prearranged data for the 
    input signal.
    • Depending on conditions, such as input image, signal cable to 
    the projector, environment around the projector, etc., the automatic 
    adjustment may not work correctly.  In such a case, please 
    choose DISABLE to disable the automatic adjustment, and make 
    adjustment manually.
    GHOST
    1.   Select a color element of ghost using 
    the ◄/► buttons. 
    2.    Adjust the selected element using the 
    ▲/▼ buttons to disappear ghost.
    FILTER MESSAGE
    Use the ▲/▼ button to set the timer for notifying by the message 
    when to replace the filter unit  100h  ó 200h 
    ó 500h 
    ó 1000h 
    ó 2000h 
    ó 5000h 
    ó OFF
    After choosing an item except OFF, the message “REMINDER 
    ***HRS PASSED .....” will appear after the timer reaches the interval 
    time set by this feature (
     58). 
    When the OFF is chosen, the message will not appear. Utilize 
    this feature to keep the air filter clean, setting the suitable time 
    according to your environment of this projector.
    • Please take care of the filter unit periodically, even if there is 
    no message. If the air filter becomes to be blocked by dust or 
    other matter, the internal temperature will rise, which could cause 
    malfunction, or reduce the lifetime of the projector.
    • Please be careful with the operating environment of the projector 
    and the condition of the filter unit.
    (continued on next page) 
    						
    							46
    OPTION menu
    ItemDescription
    SERVICE
    (continued) KEY LOCK
    Using the ▲/▼ buttons turns on/off the key lock feature. When ON 
    is selected, the buttons on the projector except the 
    STANDBY/ON 
    button are locked.
    ON  ó OFF
    • Please use this function to prevent tampering or accidental 
    operation. This function does not have any effect on the remote 
    control.
    REMOTE FREQ.
    (1)   Use the ▲/▼ button to change the projector's remote sensor 
    frequency setting  (
    4).
    1:NORMAL  ó 2:HIGH
    (2)   Use the ◄/► button to change the 
    projector's remote sensor on or off.
    ON  ó OFF
    The factory default setting is for both 1:NORMAL and 2:HIGH to be 
    on. If the remote control does not function correctly, disable either 
    of them (
     13).
    It's not possible to disable both options at the same time.
    INFORMATION
    Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
    It shows the information about the current input.
    • The “FRAME LOCK” message on the dialog means the frame lock 
    function is working. 
    • The “SCART RGB” message means the COMPONENT port 
    is working as a SCART RGB input port. Please refer to the 
    COMPONENT item in INPUT menu (
     31).
    • This item can't be selected for no signal and sync out.
    • When the MY TEXT DISPLAY is set to ON, the MY TEXT is 
    displayed together with the input information in the INPUT_
    INFORMATION box (
     52).
    FACTORY RESET
    Selecting OK using  the ► button performs this function. By this 
    function, all the items in all of menus will collectively return to the 
    initial setting. Note that the items LAMP TIME, FILTER TIME, 
    LANGUAGE, FILTER MESSAGE and SECURITY settings are not 
    reset.
    CANCEL
     ð  OK 
    						
    							47
    SECURITY menu
    This projector is equipped with security functions.
    From the SECURITY menu, items shown in the table 
    below can be performed.
    To use SECURITY menu: User registration is required 
    before using the security functions.
    Enter the SECURITY menu
    1.  Use the ▲/▼ buttons on the SECURITY menu to select ENTER PASSWORD and press the ► 
    button. The ENTER PASSWORD box will be displayed.  
    2.   Use the ▲/▼/◄/► buttons to enter the registered password. 
    The factory default password is  9676. This password can be 
    changed  (
    below). Move the cursor to the right side of the ENTER 
    PASSWORD box and press the ► button to display the SECURITY 
    menu.
    • It is strongly recommended the factory default password to be 
    changed as soon as possible.
    • If an incorrect password is input, the ENTER PASSWORD box 
    will be displayed again. If incorrect password is input 3 times, the 
    projector will turn off. Afterwards the projector will turn off every time 
    an incorrect password is input.
    3.   Items shown in the table below can be performed.
    If you have forgotten your password(1).   While the ENTER PASSWORD box is displayed, press and hold 
    the RESET button on the remote control for about 3 seconds or 
    press and hold the  INPUT button for 3 seconds while pressing the 
    ► button on the projector.
    (2).    The 10 digit Inquiring Code will be displayed. Contact your dealer 
    with the 10 digit Inquiring Code. Your password will be sent after 
    your user registration information is confirmed.
    • If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will 
    close. If necessary, repeat the process from (1).  
    Item Description
    SECURITY 
    PASSWORD  CHANGE
    (1)   Use the ▲/▼ buttons on the SECURITY menu 
    to select SECURITY PASSWORD CHANGE 
    and press the ► button to display the ENTER 
    NEW PASSWORD box.
    (2)   Use the ▲/▼/◄/► buttons to enter the new password.
    (3)   Move the cursor to the right side of the 
    ENTER NEW PASSWORD box and press the 
    ► button to display the NEW PASSWORD 
    AGAIN box, enter the same password again. 
    (4)  
    Move the cursor to the right side of the NEW 
    PASSWORD AGAIN box and press the ► 
    button and the NOTE NEW PASSWORD box 
    will be displayed for about 30 seconds, please 
    make note of the password during this time.
    Pressing the ENTER button on the remote control or ► button on the 
    projector will close the NOTE NEW PASSWORD box.
    • Please do not forget your password.
    SECURITY menu
    (continued on next page) 
    						
    							48
    SECURITY menu
    ItemDescription
    MyScreen 
    PASSWORD
    The MyScreen PASSWORD function can be used to prohibit access to the 
    MyScreen function and prevent the currently registered MyScreen image 
    from being overwritten.
    1 Turning on the MyScreen PASSWORD1-1   Use the ▲/▼ buttons on the SECURITY menu to 
    select MyScreen PASSWORD and press the ► 
    button to display the MyScreen PASSWORD on/
    off menu.
    1-2   Use the ▲/▼ buttons on the MyScreen 
    PASSWORD on/off menu to select ON. 
    The ENTER NEW PASSWORD box (small) 
    will be displayed.
    1-3   Use the ▲/▼/◄/► buttons to enter the 
    password. Move the cursor to the right side 
    of the ENTER NEW PASSWORD box (small) 
    and press the ► button to display the NEW 
    PASSWORD AGAIN box, enter the same 
    PASSWORD again.
    1-4   Move the cursor to the right side of the 
    NEW PASSWORD AGAIN box and press 
    the ► button to display the NOTE NEW 
    PASSWORD box for about 30 seconds, 
    please make note of the password during 
    this time. 
    Pressing the ENTER button on the remote control or ► button on the 
    projector will return to MyScreen PASSWORD on/off menu.
    When a password is set for MyScreen:
    • The MyScreen registration function (and menu) will be unavailable.
    • The MyScreen Lock menu will be unavailable.
    • The START UP setting will be locked on MyScreen (and the menu will be 
    unavailable).
    Turning the MyScreen PASSWORD off will allow normal operation of these 
    functions.
    • Please do not forget your MyScreen PASSWORD.
    2 Turning off the MyScreen PASSWORD2-1   Follow the procedure in 1-1 to display the MyScreen  PASSWORD on/off 
    menu.
    2-2 
      Select OFF to display the ENTER 
    PASSWORD box (large). Enter the registered 
    password and the screen will return to the 
    MyScreen PASSWORD on/off menu.
    If an incorrect PASSWORD is input, the menu will 
    close. If necessary, repeat the process from 2-1.
    3 If you have forgotten your password3-1   Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off 
    menu.
    3-2   Select OFF to display the ENTER PASSWORD box (large). The 10 digit 
    Inquiring Code will be displayed inside the box.
    3-3   Contact your dealer with the 10 digit Inquiring Code. Your password will 
    be sent after your user registration information is confirmed.
    ENTER NEW PASSWORD 
    box (small)
    (continued on next page)
    ENTER PASSWORD box  (large) 
    						
    							49
    SECURITY menu
    ItemDescription
    PIN LOCK
    PIN LOCK is a function which prevents the projector from being used unless 
    a registered Code is input.
    1 Turning on the PIN LOCK1-1   Use the ▲/▼ buttons on the SECURITY menu 
    to select PIN LOCK and press the ► button or 
    the ENTER button to display the PIN LOCK on/
    off menu.
    1-2   Use the ▲/▼ buttons on the PIN LOCK on/
    off menu to select ON and the Enter PIN 
    Code box will be displayed. 
    1-3   Input a 4 part PIN code using the ▲/▼/◄/►, 
    COMPUTER or INPUT button. 
    The PIN Code again box will appear. Reenter 
    the same PIN code. This will complete the PIN 
    code registration.
    • If there is no key input for about 55 seconds   
    while the Enter PIN Code box or the PIN Code again box is displayed, 
    the menu will close. If necessary, repeat the process from 1-1.
    Afterwards, anytime the projector is restarted after AC power  is turned off 
    the Enter PIN Code box will be displayed. Enter the registered PIN code.
    The projector can be used after entering the registered PIN code. If an 
    incorrect PIN code is input, the Enter PIN code box will be displayed again.
    If an incorrect PIN Code is input 3 times, the projector will turn of f. 
    Afterwards the projector will turn off every time an incorrect PIN code is 
    input. The projector will also turn off if there is no key input for about 5 
    minutes while the Enter PIN code box is displayed.
    This function will activate only when the projector is started after  AC power 
    is turned off.
    • Please do not forget your PIN code.
    2 Turning off the PIN LOCK2-1   Follow the procedure in 1-1 to display the PIN LOCK on/off menu. 
    2-2   Use the ▲/▼ buttons to select OFF and the Enter PIN Code box will be 
    displayed.  
    Enter the registered PIN code to turn the PIN LOCK function off.
    If an incorrect PIN Code is input 3 times, the menu will close.
    3 If you have forgotten your PIN Code3-1   While the Enter PIN Code box is displayed, press and hold the  RESET 
    button for three seconds or press and hold the  INPUT button for 3 
    seconds while pressing the ► button on the projector. 
    The 10 digit Inquiring Code will be displayed.
    • If there is no key input for about 5 minutes 
    while the Inquiring Code is displayed, the 
    projector will turn off.
    3-2   Contact your dealer with the 10 digit Inquiring Code. Your PIN Code will 
    be sent after your user registration information is confirmed.
    (continued on next page) 
    						
    							50
    SECURITY menu
    ItemDescription
    TRANSITION  DETECTOR
    If this function is set to ON when the vertical angle of 
    the projector or MIRROR setting at which the projector 
    is turned on is different than the previously recorded, the 
    TRANSITION DETECTOR ON alarm will be displayed 
    and the projector will not display the input signal.
    • To display the signal again, set this function OFF.
    • After about 5 minutes of displaying the TRANSITION DETECTOR ON 
    alarm, the lamp will turn off.
    • Keystone adjustment feature has been prohibited as long as the  Transition 
    Detector function is on.
    1 Turning on the TRANSITION DETECTOR1-1   Use the ▲/▼ buttons on the SECURITY menu 
    to select TRANSITION DETECTOR and press 
    the ► or the  ENTER button to display the 
    TRANSITION DETECTOR on/off menu.
    1-2  
    Use the ▲/▼ buttons on the TRANSITION 
    DETECTOR on/off menu to select ON. Select 
    ON and the current angle and MIRROR 
    setting will be recorded. The ENTER NEW 
    PASSWORD box (small) will be displayed.
    1-3  Use the ▲/▼/◄/► buttons to enter a 
    password. Move the cursor to the right side 
    of the ENTER NEW PASSWORD box (small) 
    and press the ► button to display the NEW 
    PASSWORD AGAIN box, enter the same 
    password again.
    1-4   Move the cursor to the right side of the 
    NEW PASSWORD AGAIN box and press 
    the ► button to display the NOTE NEW 
    PASSWORD box for about 30 seconds, 
    please make note of the password during 
    this time.
    Pressing the ENTER button on the remote control or the ► button on the 
    projector will return to the TRANSITION DETECTOR on/off menu.
    • Please do not forget your TRANSITION DETECTOR password.
    • This function will activate only when the projector is started after turning off 
    the AC power.
    • This feature may not function properly if the projector is not in a stable 
    position when ON is selected.
    2 Turning off the TRANSITION DETECTOR2-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.2-2  Select OFF to display the ENTER 
    PASSWORD box (large). Enter the registered 
    password and the screen will return to the 
    TRANSITION DETECTOR on/off menu.
    If an incorrect password is input, the menu will 
    close. If necessary, repeat the process from 2-1.
    3 If you have forgotten your password3-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.3-2   Select OFF to display the ENTER PASSWORD box (large). The 10 digit 
    Inquiring Code will be displayed inside the box.
    3-3   Contact your dealer with the 10 digit Inquiring Code. Your password will 
    be sent after your user registration information is confirmed.
    (continued on next page)
    ENTER NEW PASSWORD 
    box (small)
    ENTER PASSWORD box  (large) 
    						
    All Hitachi manuals Comments (0)

    Related Manuals for Hitachi Cp-X2511 Projector Users Manual