Hitachi Cp-X205 Projector Users Manual

4

ItemDescription
AUTO OFF
Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of...

4

ItemDescription
MY BUTTON
This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (6).Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.• COMPUTER2: Sets port to COMPUTER IN2.• COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)• S-VIDEO: Sets port to S-VIDEO.• VIDEO: Sets port to VIDEO.• e-SHOT: Displays the e-SHOT...

43

ItemDescription
SERVICE(continued)
AUTO ADJUST
Using the ▲/▼ buttons enables/disables the automatic adjustment. When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.
FINE ó FAST ó DISABLE      
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the 
input signal.
• Depending on conditions, such as input image, signal cable to the projector,...

44

ItemDescription
SERVICE(continued)
KEY LOCK
Using  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When TURN  ON  is  selected,  the  buttons  on  the  projector  except  the STANDBY/ON button are locked.TURN ON ó TURN OFF• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
REMOTE FREQ.
Use the ▲/▼ button to change the projector's remote sensor setting.
1:NORMAL ó 2:HIGH
Items with a checkmark are on. The factory...

45

ItemDescription
SECURITY
This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed. The factory default PASSWORD is 8471. This PASSWORD can be changed (1.2 Changing the PASSWORD (below)). 
• It is strongly recommended the...

46

ItemDescription
SECURITY(continued)
1.3 If you have forgotten your PASSWORD
1.3-1  Follow the procedure in 1.1-1 to display the ENTER PASSWORD box.
1.3-2   While the ENTER PASSWORD box is 
displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds.The 10-digit Inquiring Code will be displayed.• If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close. If necessary repeat...

47

ItemDescription
SECURITY(continued)
2.2-4  Move the cursor to the right side of the PASSWORD AGAIN box and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button will return to MyScreen PASSWORD on/off menu.When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock function (and menu) will be unavailable.
• The START UP setting will be locked on...

48

ItemDescription
SECURITY(continued)
3.1-2  Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 
3.1-3     Input a 4 part PIN Code using the ▲, ▼, 
◄, ►, COMPUTER and INPUT buttons.A PIN Code again box will appear. Reenter the same PIN Code. This will complete the PIN Code registration.
• If there is no key input for about 55 seconds while the PIN BOX or the PIN Code again box are displayed the menu will close. If necessary repeat the process from...

49

ItemDescription
SECURITY(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.• Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.• Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.• Keystone adjustment feature has been prohibited as long as the Transition Detector function is...

50

ItemDescription
SECURITY(continued)
4.2-4  Move  the  cursor  to  the  right  side  of  the PA S S W O R D   A G A I N   b o x   a n d   p r e s s   t h e ►  button  to  display  the  PASSWORD  for about  20  seconds,  please  make  note  of  the PASSWORD during this time.Pressing the ENTER button will return to the TRANSITION DETECTOR on/off menu.• Please do not forget your Transition Detector PASSWORD.
4.3 Setting the Transition Detector off
4.3-1  Follow the procedure in 4.1-1 to display the...