Hitachi Cp-X2015wn Projector Users Manual

41
IMAGE menu
Item Description
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right 
 Left
• This item can be selected only for a computer signal or a 
component video signal. This function is unavailable for a signal 
from the LAN, USB TYPE A, USB TYPE B or HDMI port.
H SIZEUsing the ◄/► buttons adjusts the horizontal size.
Small 
 Large
• This item can be selected only for a computer signal. This function 
is unavailable for a signal from the LAN, USB TYPE A, USB TYPE...

42
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
PROGRESSIVEUsing the ▲/▼ buttons switches the progress mode.
TV 
 FILM 
 OFF
  
• This function works only for a video signal, s-video signal, component 
video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM 
signal...

43
INPUT menu
Item Description
VIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.
(1)  Use the ▲/▼ buttons to 
select the input port.
(2)  Using the ◄/► buttons 
switches the mode for video 
format.
AUTO  
  NTSC  
  PAL  
  SECAM
      N-PAL 
 M-PAL 
 NTSC4.43 
• This item is performed only for a video signal from the VIDEO port 
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the 
picture...

44
INPUT menu
Item Description
COMPUTER INThe computer input signal type for COMPUTER IN1 and IN2 ports 
can be set.
(1)  
Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2)  Use the ◄/► buttons to select 
the computer input signal type.
AUTO 
 SYNC ON G OFF
• Selecting the AUTO mode allows  
you to input a sync on G signal or component video signal from the 
port (
12).
• In the AUTO mode, the picture may be distorted with certain 
input signals. In such a case, remove the signal...

45
INPUT menu
Item Description
RESOLUTIONThe resolution for the COMPUTER IN1 and COMPUTER IN2 input 
signals can be set on this projector.
(1)  In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button. 
The RESOLUTION menu will be  
displayed.
(2)  In the RESOLUTION menu select the 
resolution you wish to display using 
the ▲/▼ buttons.  
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3)  Pressing the ► or ENTER button when 
selecting a STANDARD...

46
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
AUTO KEYSTONE Selecting this item performs the Automatic keystone distortion 
correction. Projector automatically corrects vertical keystone 
distortion due to the (forward/backward) setup angle by itself.
This function will be...

47
SETUP menu
Item Description
AUTO ECO MODEUsing the ▲/▼ buttons turns on/off the AUTO ECO MODE.
ON 
 OFF
• When ON is selected, the projector will always be set to Eco mode 
at start-up regardless of the ECO MODE (
below) setting. An OSD 
message “AUTO ECO MODE” will be displayed for a while when 
the projector starts with this function activated.
ECO MODEUsing the ◄/► buttons switches the ECO MODE. 
NORMAL 
 ECO 
 INTELLIGENT ECO
 SAVER
• When the ECO is selected, acoustic noise and screen...

48
Item Description
STANDBY MODEUsing ▲/▼ buttons switches the standby mode setting between 
NORMAL and SAVING. 
NORMAL 
 SAVING
When SAVING is selected, the power consumption in the standby 
mode is lowered with some functional restriction as below:
• When SAVING is selected, the RS-232C communication control 
except to turn the projector on and the network function are disabled 
while the projector is in the standby mode. If the COMMUNICATION 
TYPE in the COMMUNICATION menu is set to NETWORK 
BRIDGE,...

49
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table 
below can be performed. Select an item using the 
▲/▼ cursor buttons, and press the ► cursor button 
or the ENTER button to execute the item. Then 
perform it according to the following table. 
Item Description
VOLUMEUsing the ◄/► buttons adjusts the volume.     Low 
 High
SPEAKERUsing the ▲/▼ buttons turns on/off the built-in speaker.
ON 
 OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCEWhile the image...

50
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
Item Description
LANGUAGEUsing the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH 
 FRANÇAIS 
 DEUTSCH 
  ESPAÑOL
       
  
(shown in the LANGUAGE dialog)  
Press the ENTER or INPUT button to save the language...