Hitachi Cp-X2015wn Projector Users Manual

111
Maintenance
Cleaning and replacing the air filter (continued)
9.Turn the projector on and reset the filter time using the FILTER TIME item in 
the EASY MENU.
►Before taking care of the air filter, make sure the power cable 
is not plugged in, then allow the projector to cool sufficiently. Taking care of the 
air filter in a high temperature state of the projector could cause an electric shock, 
a burn or malfunction to the projector.
►Use only the air filter of the specified type. Do not use the projector...

11 2
Maintenance
Other care
In order to ensure the safe use of your projector, please have it cleaned and 
inspected by your dealer about once every year.
1.Turn the projector off, and unplug the power cord. Allow the projector to cool 
sufficiently.
2.After making sure that the projector is cool adequately, lightly wipe the lens 
with a commercially available lens-cleaning wipe. Do not touch the lens 
directly with your hand. If the lens is flawed, soiled or fogged, it could cause deterioration of display...

11 3
Troubleshooting
Troubleshooting
If an abnormal operation should occur, stop using the projector immediately.
Otherwise if a problem occurs with the projector, the following checks and measures are 
recommended before requesting repair. 
If this does not resolve the problem, please contact your dealer or service company. They 
will tell you what warranty condition is applied.
►Never use the projector if abnormal operations such as smoke, 
strange odor, excessive sound, damaged casing or elements or...

11 4
Message Description
The internal temperature is rising. 
Please turn the power off, and allow the projector to cool 
down at least 20 minutes. After having confirmed the 
following items, please turn the power ON again. 
 • Is there blockage of the air passage aperture? 
 • Is the air filter dirty? 
 • Does the peripheral temperature exceed 35°C?
 • If the projector is used at an altitude of about 1600 m (5250 
feet) or higher, set ALTITUDE of the SERVICE item in the 
OPTION menu to HIGH (
59)
.  
If...

11 5
Troubleshooting
Regarding the indicator lamps
When operation of the LAMP, TEMP and POWER indicators differs from usual, 
check and cope with it according to the following table.
POWER 
indicatorLAMP 
indicatorTEMP 
indicatorDescription
Lighting
In 
Orange
Turned
offTurned
offThe projector is in a standby state.
Please refer to the section “Power on/off”.
Blinking
In 
Green
Turned
offTurned
offThe projector is warming up.
Please wait.
Lighting
In 
Green
Turned
offTurned
offThe projector is in an on...

11 6
Troubleshooting
Regarding the indicator lamps (continued)
POWER 
indicatorLAMP 
indicatorTEMP 
indicatorDescription
Blinking
In 
Red
or
Lighting
In 
Red
Turned
offBlinking
In 
Red
The cooling fan is not operating.
Please turn the power off, and allow the projector to 
cool down at least 20 minutes. After the projector has 
sufficiently cooled down, please make confirmation 
that no foreign matter has become caught in the fan, 
etc., and then turn the power on again.
If the same indication is displayed...

11 7
• When the interior portion has become overheated, for safety 
purposes, the projector is automatically shut down, and the indicator lamps 
may also be turned off. In such a case, disconnect the power cord, and wait at 
least 45 minutes. After the projector has sufficiently cooled down, please make 
confirmation of the attachment state of the lamp and lamp cover, and then turn 
the power on again. 
If the projector is used at an altitude of about 1600 m (5250 feet) 
or higher, set ALTITUDE of the...

11 8
Troubleshooting
Resetting all settings
When it is hard to correct some wrong settings, the FACTORY RESET function of 
SERVICE item in OPTION menu (
66) can reset all settings (except settings such 
as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, SECURITY and 
NETWORK) to the factory default. 
Be sure to set ALTITUDE after resetting all the 
settings (
59)
.
Phenomena that may be easy to be mistaken for machine defects
About the phenomenon confused with a machine defect, check and cope with it...

11 9
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon Cases not involving a machine defectReference 
page
Sound does 
not come out.The signal cables are not correctly connected.
Correctly connect the audio cables.
12 ~ 15
The MUTE function is working.
Restore the sound pressing MUTE or VOLUME +/- 
button on the remote control.
23
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu 
function or the remote...

120
Phenomenon Cases not involving a machine defectReference 
page
No pictures are 
displayed. 
(continued)
The projector does not recognize the USB storage 
device inserted into USB TYPE A port. 
Before removing the USB storage device, be sure to use 
the REMOVE USB function on the thumbnail screen, which 
appears when the USB TYPE A port is selected as the input 
source.13, 87
Video screen 
display 
freezes.The FREEZE function is working.
Press FREEZE button to restore the screen to normal.
31
Colors...