Hitachi Cp-X1250 Projector Quick Guide
Have a look at the manual Hitachi Cp-X1250 Projector Quick Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
b m a n 1 Projector CP-X1200/CP-X1250 CP-X1200/CP-X1250 User User ’ ’ s Manual – Quick Guide s Manual – Quick Guide Thank you for purchasing this projector. • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear in this manual. • The reproduction, transmission or use of this document or contents is not permitted without express written authority.NOTE WARNINGBefore using, read the Users Manual - Safety Guide and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Contents Of Package Contents Of Package Refer to this table, in case of 4:3 aspect ratios. The values aand bshown in the table are calculated for a full size screen. Arrangement Arrangement Lens center Screen 1Projector & Lens Cap 2 Power cords (UK, US, Europe) 3RGB cable 4Video/Audio cable 5M1-D cable 6Remote control 7Batteries (for the remote control) 8User’s Manuals Safety Guide Quick Guide Operating Guide INTERINPUTM 1 - DR G BB NG S-VIDEOSTANDBY/ ONT EM PVIDEOCO MP ONENTLAMPKEYST ONESE ARCHRE SETMEN UFOCUSLEN S SHI FTZOO MSTANDBY/ONVIDEOLASER INDICATOR ESCMENUPOSITIONRESET AUTOKEYSTONE1 2 3 ID CHANGESEARCHON OFFFREEZE MUTEMAGNFYPinPVOLUME RGB BLANK PREVIOUSNEXT ASPECT ENTER LASERLENS SHIFT+ –––++FOCUSZOOM I N T E RI NP UTM1 -DRG BBN G S-VIDE OS TANDB Y/ ONT EMPVI DE OCOMPON E N TLAMPKE YS T ONES EA RCHRE SETM EN UFOCUSLEN S SHI FTZ OO M Side view 7 6 1 23 4 5 8 Screen Size [inch (m)]a[inch (m)]b[inch (cm)]Min.Max.m:n=1:1m:n=10:0 40 (1.0)46(1.2) 71(1.8)12(30)24(61) 60 (1.5)71(1.8)107(2.7)18(46)36(91) 70 (1.8)83(2.1)126(3.2)21(53)42(107) 80 (2.0)95(2.4)144(3.7)24(61)48(122) 100 (2.5)120(3.0)181(4.6)30(76)60(152) 120 (3.0)144(3.7)217(5.5)36(91)72(183) 150 (3.8)181(4.6)272(6.9)45(114)90(229) 200 (5.1)243(6.2)364(9.2)60(152)120(305) 250 (6.4)304(7.7)455(11.6)75(191)150(381) 300 (7.6)366(9.3)547(13.9)90(229)180(457) 350 (8.9)427(10.9)638(16.2)105(267)210(533) 400 (10.2)489(12.4)730(18.5)120(305)240(610) 500 (12.7)612(15.5)913(23.2)150(381)300(762) $19&/(2(
2 Please refer to the following for connecting your devices. See the rear of the projector. You can see the ports. Connecting Y Connecting Y our Devices our Devices INTERIN PU TM 1 - DRG BBNG S -V IDE OST A NDBY/ ONT EM PVID EOCOMP ON E NTLA M PKE YSTO NESE ARC HRES ETMEN UF OC USL EN S S HIFTZO O M V ID E O R - A UD IO IN -LS-V ID E O BNC R GB A UD I O IN1 A UD I O IN2 RGB OUTA UD I O OUT REMOTE C ONTROL R/CR/PRG/YB/CB/PBH VY CONTROL N ETWORK CR/PRCa /Pa R/CR/PR G/Y B/CB/PB H V Connecting to a computer WARNING• Install the projector in a suitable environment according to instructions of the “User’s Manual – Safety Guide”. VIDEO R-AUDIO IN-LS-VIDEO BNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT REMOTE CONTROL R/CR/PRG/Y B/CB/PBHVY CONTROL NETWORK CR/PR Ca/PaAE FG REMOTE CONTROL VIDEO R-AUDIO IN-L S-VIDEOBNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT G/Y H VY CONTROL NETWORK CR/PR Ca/Pa R/CR/PRB/CB/PB BD REMOTE CONTROL VIDEO R-AUDIO IN-LS-VIDEO BNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT R/CR/PRG/Y B/CB/PBHVY CONTROL NETWORK CR/PR Ca/Pa C D ComputerProjector RGB out RGB cableRGB Audio out Stereo Mini cableAUDIO IN 2 RS-232C port RS-232C cableCONTROL Network port CAT-5 cableNETWORK ■If using a M1-D input (to mouse control) ■ If using a BNC input DVI portM1-D USB port M1-D cable Audio out Stereo Mini cableAUDIO IN 1 BNC cable RGB outR/C R/PR G/Y B/C B/PB H V C D B G F E A D Audio out Stereo Mini cableAUDIO IN 1 $19&/(2(
3 REMOTE CONTROL VIDEO R-AUDIO IN-LS-VIDEO BNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT R/CR/PRG/Y B/CB/PBHVY CONTROL NETWORK CR/PR Ca/PaL REMOTE CONTROL VIDEO R-AUDIO IN-LS-VIDEO BNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT R/CR/PRG/Y B/CB/PBHVY CONTROL NETWORK CR/PR Ca/PaM VIDEO R-AUDIO IN-LS-VIDEO BNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT R/CR/PRG/Y B/CB/PBHVY CONTROL NETWORK CR/PR Ca/Pa REMOTE CONTROL HI REMOTE CONTROL VIDEO R-AUDIO IN-LS-VIDEO BNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT R/CR/PRG/Y B/CB/PBHVY CONTROL NETWORK CR/PR Ca/Pa HJ REMOTE CONTROL VIDEO R-AUDIO IN-LS-VIDEO BNC RGB AUDIO IN1 AUDIO IN2 RGB OUTAUDIO OUT R/CR/PRG/Y B/CB/PBHVY CONTROL NETWORK CR/PR Ca/Pa H K MonitorProjector RGB in RGB cableRGB OUT Connecting to a monitor SpeakerProjector Connecting to a speaker (with amplifier) Audio in Stereo Mini cableAUDIO OUTM VCR/DVD PlayerProjector Connecting to a VCR/DVD Player ■ If using a s-video signal ■ If using a component signal R-AUDIO IN-L VIDEO R-AUDIO IN-L VIDEO COMPONENT S-video out S-video cableS -VIDEO J L CR/PR CB/PB Y C R/PRout C B/PBout Y out R-AUDIO IN-L VIDEOR-AUDIO IN AUDIO IN-LAudio out (R) Audio out (L) Audio out (R) Audio out (L) R-AUDIO IN AUDIO IN-L R-AUDIO IN AUDIO IN-L VIDEO IN Audio out (R) Audio out (L) Video outH H K H I $19&/(2(
4 INTERIN PU TM1-DRGBBN G S- VI D EOS TAND B Y /ONTEM PV IDE OCOMPONEN TLAM PK EY ST ON ESEA RC HR ESE TM E NUF OCU SL E NS SH IF TZ OOM VIDE O R-A UDIO IN-LS-VID EO BNC RGB A UD IO IN1 A UDIO IN2 R GB OU TA UDIO OU T REMOTE CONTROL R/CR/PRG/YB /CB/PBH VY C ONTROL NETWORK CR/PRCa/Pa Connecting The Power Supply Connecting The Power Supply Adjusting The Projectors Elevator Adjusting The Projectors Elevator WARNING• Use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and/or electrical shock. Please adhere to the “User’s manual – Safety Guide” and the following. • Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.• Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.• Make sure that you firmly connect the power cord to the projector and wall outlet. 1Connect the connector of the power cord to the AC inlet of the projector. 2Firmly plug the power cord’s plug into the outlet.AC Inlet Connector PlugOutlet WARNING• Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn. CAUTION • To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet. Press and hold in the elevator buttons. 2Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock into position. 3As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand. Elevator buttons Elevator feet I N T E RI NP UTM1-DRGBB NG S-V ID EOS TAN DB Y /ONTE MPVID EOC O MPO NENTLAMPK EY ST ON ESE ARCHR ES E TME NUFO CUSLE NS S HIF TZO OM 1 $19&/(2(
5 Preparing Remote Control Preparing Remote Control WARNING• The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. CAUTION •Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION• About the battery • Keep a battery away from children and pets. • Use only the battery specified: two AA batteries. • Do not mix new battery with used one. • Make sure the plus and minus terminals are correctly aligned when loading the battery (as indicated in the remote control). • Dispose of batteries in accord with environmental laws. STANDBY/ONVIDEOLASER INDICA TOR ESCMENUPOSITIONRESET AUTO KEYSTONE1 2 3 ID CHANGESEARCHON OFFFREEZE MUTEMAGNFYPinPVOLUME RGB BLANK PREVIOUSNEXT ASPECT ENTER LASERLENS SHIFT+ –––++FOCUSZOOM 1Remove the battery cover. Slide back and remove the battery cover in the direction of the arrow. Insert the batteries. Align and insert the two AA batteries according to their plus minus terminals (as indicated in the remote control). Close the battery cover. Replace the battery cover in the direction of the arrow and snap it back into place. 2 3 AVOID EXPOSURE-LASER RADIATION IS EMITTED FROM THIS APERTURE CAUTION WAVE LENGTH: 640-660nm MAX OUTPUT: 1mW CLASS 2 LASER PRODUCTComples with 21 CFR, 1040.10 AND 1040.11 IEO60825-1:1993+A1:1997+A2:2001 LASER-STRAHLING NICHT IN DEN STRAHL BLICKEN LASER KLASSE 2 WAVE LENGTH:640-660nm MAX OUTPUT:1mW 蔲”« ϔܛwgV\‡sM\q «åµè”²” a ¼y+*4$¢£ 7 G Z—N8y þ ÕµON MODEL:H-IRC4 LASER RADIATION DO NOT STARE INTO BEAM MANUFACTURER: B MANUFACTURED JANUARY,2003 INTERLINK K.K. 1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO,JAPAN 101-0031 MADE IN CHINAJQA MADE IN CHINAP S C