Home > Hitachi > Projector > Hitachi Cp-S245 Users Manual

Hitachi Cp-S245 Users Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Hitachi Cp-S245 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    31
    
    Multifunctional settings
    ItemDescription
    H SIZE
    Using the buttons ▲/▼ adjusts the horizontal size.
    Large  Small
    • This item can be selected only for an RGB signal.
    • When this adjustment is excessive, the picture may not be 
    displayed correctly. In such a case, please reset the adjustment 
    by pressing the RESET button on the remote control during this 
    operation.
    AUTO ADJUST 
    EXECUTE
    Selecting this item performs the automatic adjustment feature.
    For an RGB signalThe vertical position, the horizontal position, the clock phase and 
    the horizontal size will be automatically adjusted. And the aspect 
    ratio will be automatically selected. Make sure that the application window is set to its maximum size 
    prior to attempting to use this feature. A dark picture may still be 
    incorrectly adjusted. Use a bright picture when adjusting.
    For a video signal or s-video signalThe video format best suited for the respective input signal will be 
    selected automatically.
    This function is available only when the AUTO mode is selected to 
    the VIDEO FORMAT item in the INPUT menu. For a component 
    video signal, the signal type is identified automatically independently 
    of this function.For a video signal, s-video signal or component video signalThe vertical position and horizontal position will be automatically adjusted.
    For a component video signalThe aspect ratio will be automatically selected.The clock phase will be automatically adjusted.
    • The automatic adjustment operation requires approximately 10 
    seconds. Also please note that it may not function correctly with 
    some input.
    IMAGE Menu (continued) 
    						
    							
    32
    
    Multifunctional settings
    INPUT Menu
    ItemDescription
    COLOR SPACE
    Using the buttons ▲/▼ switches the mode for color space. 
    AUTO 
     RGB  SMPTE240  REC709  REC601      
    • This item can be selected only for an RGB signal or a component video signal (except signals of 525i(480i)/625i(576i)/SCART RGB from the component video port).
    •  The AUTO mode automatically selects the optimum mode. 
    • The AUTO operation may not work well at some signals. In such a 
    case, it might be good to select a suitable mode except AUTO.
    COMPONENT
    Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port. 
    COMPONENT   SCART RGB 
    When the SCART RGB is selected, the COMPONENT VIDEO port 
    function as a port for a SCART RGB signal input.  A SCART adapter 
    and SCART cable realize a SCART RGB input to the projector. For 
    details, contact your dealer.
    VIDEO FORMAT
    Using the buttons ▲/▼ switches the mode for video format.
    AUTO  
      NTSC     PAL    SECAM 
          
    N-PAL  M-PAL  NTSC4.43 
    • This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. For a component video signal, the signal type 
    is identified automatically independently of this function.
    • The AUTO mode automatically selects the optimum mode.
    • The AUTO operation may not work well for some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal.
    FRAME LOCK
    Using the buttons ▲/▼ turns the frame lock function on/off. 
    TURN ON  TURN OFF
    • This item performs only at a RGB signal with vertical frequency of 50 to 72 Hz for the model CP-S245, or 50 to 60 Hz for the model CP-X255.
    • When the TURN ON is selected, a moving picture is displayed 
    more smoothly.
    • This function may cause a certain degradation of the picture. In 
    such a case, please select the TURN OFF.
    With  the INPUT   menu,  the  items  shown  in  the  table  below 
    can be performed. 
    Select an item using the cursor buttons ▲/▼ on the 
    projector or remote control, and press the cursor button ► 
    on the projector or remote control, or the ENTER button 
    on the remote control to execute the item. Then perform it 
    referring to the following table. 
     MENU [RGB]
     IMAGE
     SETUP
     PICTURE
     INPUT
     OPTION NETWORK EASY MENU
     SCREEN
       :SELECT
     VIDEO FORMAT AUTO
     COLOR SPACE  AUTO
     FRAME LOCK INFORMATION
     COMPONENT    COMPONENT
    TURN ON 
    						
    							
    33
    
    Multifunctional settings
    INPUT Menu (continued)
    ItemDescription
    INFORMATION
    Selecting this item displays a dialog titled “INPUT INFORMATION”. It shows the information about the current input.
    INPUT-INFORMATIONRGB1024x768 @60.0FRAME LOCK
    INPUT-INFORMATIONS-VIDEOSECAMAUTO
    INPUT-INFORMATIONCOMPONENT576i @50SCAR T RGB
    • The “FRAME LOCK” message on the dialog means the frame lock function is working.• The “SCART RGB” message means the COMPONENT VIDEO 
    port is working as a SCART RGB input port. Please refer to the 
    COMPONENT item in this menu.
     (32)
    • This item can't be selected for no signal and sync out. 
    						
    							
    34
    
    Multifunctional settings
    SETUP Menu
    ItemDescription
    KEYSTONE
    Using the buttons ▲/▼ corrects the keystone distortion.
    Upper in the data  Lower in the data
    •  The adjustable range of this function will vary with the type of input 
    signal. At some signals, this function may not work well.
    • When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is 
    angled downward, this function may not work correctly.
    • When the zoom adjustment is set to the TELE side, this correction 
    may be excessive. This function should be used with zoom set to 
    WIDE whenever possible.
    WHISPER
    Using the buttons ▲/▼ turns off/on the whisper mode.
    NORMAL 
     WHISPER
    • When the WHISPER is selected, acoustic noise and screen brightness are reduced.
    MIRROR
    Using the buttons ▲/▼ switches the mode for mirror status.
    NORMAL   H:INVERT  V:INVERT  H&V:INVERT 
    VOLUMEUsing the buttons ▲/▼ adjusts the volume.
    High  Low
    AUDIO
    Choose an input port using the buttons ▲/▼ 
    (1), then select the audio port to be interlocked 
    with the input port using the buttons ◄/► (2). 
    When off is selected, both of two audio ports 
    do not work for the input port.
    (1)  RGB1  RGB2   COMPONENT  S-VIDEO  VIDEO
    (2)  1  2  
    With the SETUP
     menu, the items shown in the table below 
    can be performed. 
    Select an item using the cursor buttons ▲/▼ on the 
    projector or remote control, and press the cursor button ► 
    on the projector or remote control, or the ENTER button 
    on the remote control to execute the item. Then perform it 
    referring to the following table. 
     MENU [RGB]
     IMAGE
     SETUP
     PICTURE
     INPUT
     OPTION NETWORK EASY MENU
     SCREEN
       :SELECT
     WHISPER      NORMAL MIRROR       NORMAL
     KEYSTONE     +0
     AUDIO  VOLUME       16
     AUDIO
      
     RGB2
       QUIT
     RGB1
     S‑VIDEO VIDEO
     COMPONENT
    1   2 
    						
    							
    35
    
    Multifunctional settings
    SCREEN Menu
    ItemDescription
    LANGUAGE
    Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
    SUOMI  POLSKI  TÜRKÇE
    ENGLISH  FRANÇAIS  DEUTSCH  ESPAÑOL  ITALIANO
    NORSK  NEDERLANDS  PORTUGUÊS  日本語
                     SVENSKA 
    MENU POSITIONUsing the buttons ◄/►/▲/▼ adjusts the menu position.
    To quit the operation, press the MENU button on the remote control 
    or keep no operation for 10 seconds.
    OSD BRIGHT. Using the buttons ▲/▼ switches the 
    brightness level of the OSD (On 
    Screen Display).
    BRIGHT 
     DARK
    BLANK
    Using the buttons ▲/▼ switches the mode for the blank screen.
    The blank screen is a screen for the temporarily blanking feature 
    (22). It is displayed by pressing the BLANK button on the remote control.
    MyScreen   ORIGINAL  BLUE  WHITE  BLACK
      
    MyScreen is a screen you can register as a desired screen. The 
    ORIGINAL screen is the existing standard screen. BLUE, WHITE 
    and BLACK are non-patterned (plain) screens in each color.
    • To avoid remaining as an afterimage, the MyScreen and the 
    ORIGINAL screens will change to the BLACK screen after several 
    minutes.
    • For the MyScreen, please refer to the MyScreen item (36).
    With  the S CREEN   menu,  the  items  shown  in  the  table 
    below can be performed. 
    Select an item using the cursor buttons ▲/▼ on the 
    projector or remote control, and press the cursor button ► 
    on the projector or remote control, or the ENTER button 
    on the remote control to execute the item. Then perform it 
    referring to the following table. 
     MENU [RGB]
     IMAGE
     SETUP
     PICTURE
     INPUT
     OPTION NETWORK EASY MENU
     SCREEN
       :SELECT
     LANGUAGE      ENGLISH MENU POSITION
     START UP      ORIGINAL
     OSD BRIGHT.   5
     MyScreen MyScreen Lock TURN OFF MESSAGE       TURN ON
     BLANK         BLACK 
    						
    							
    36
    
    Multifunctional settings
    ItemDescription
    START UP
    Using the buttons ▲/▼ switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.
    MyScreen   ORIGINAL  TURN OFF
        
    MyScreen is a screen you can register as a desired screen.The 
    ORIGINAL screen is the existing standard screen. When TURN 
    OFF is selected, the BLACK screen is used.
    • 
    To avoid remaining as an afterimage, the MyScreen and the 
    ORIGINAL screens will change to the BLANK screen after several 
    minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen.
    • For the MyScreen, please refer to the item MyScreen below. For 
    the BLANK screen, please refer to the BLANK item (35).
    MyScreen
    This item functions for capturing the MyScreen of the blank screen and the start-up screen. Please execute displaying the input including the picture you want to capture.
    1.  Selecting this item displays a dialog titled “MyScreen”. It will ask 
    you if you start capturing the picture from the current screen. Please wait for the target picture to be displayed, and press the ENTER button on the remote control when the picture is 
    displayed. The picture will freeze and the frame for capturing 
    appears.
         To stop performing, press the RESET or ESC button on the 
    remote control. 
    2.  Using the buttons ◄/►/▲/▼ adjusts the frame position. Please 
    move the frame to the position of the picture which you want to use.      The frame may not be able to be moved for some input signals.
         To start registration, press the ENTER button on the remote 
    control.
         To restore the screen and return to the previous dialog, press the  RESET or ESC button on the remote control.
    Registration takes several minutes. When the registration is completed, the registered screen and the message “MyScreen 
    registration is finished.” are displayed for several seconds. If the 
    registration failed, the message “A capturing error has occurred. 
    Please try again.” is displayed.
    MyScreen Lock
    Using the buttons ▲/▼ turns on/off the MyScreen lock function.
    TURN ON  TURN OFF
    When the TURN ON is selected, the item MyScreen is locked. Use 
    this function for protecting the current MyScreen.
    SCREEN Menu (continued) 
    						
    							
    37
    
    Multifunctional settings
    ItemDescription
    MESSAGE
    Using the buttons ▲/▼ turns on/off the message function.
    TURN ON  TURN OFF
    When the TURN ON is selected, the following message function 
    works. “AUTO IN PROGRESS” while automatically adjusting
    ”NO INPUT IS DETECTED”
    ”SYNC IS OUT OF RANGE”
    "Searching….” while searching for the input”Detecting….” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ration displayed by changingThe indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button.• When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfurction (22).
    SCREEN Menu (continued) 
    						
    							
    38
    
    Multifunctional settings
    OPTION Menu
    ItemDescription
    AUTO SEARCH
    Using the buttons ▲/▼  turns on/off the automatic signal search  function.
    TURN ON  TURN OFF
    This function works with INPUT, RGB, and VIDEO buttons.
    When the TURN ON is selected, detecting no signal automatically 
    cycles through input ports in the following order . The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. RGB IN1  RGB IN2  COMPONENT VIDEO  S-VIDEO  VIDEO     
    • When the RGB IN2/RGB OUT port functions as an RGB out port (the 
    RGB IN OUT switch is pushed in), RGB IN2 cannot be selected. In 
    that case “RGB2/RGB OUT 
      RGB OUT” message will be displayed.
    AUTO OFF
    Using the buttons ▲/▼ adjusts the time to count down to 
    automatically turn the projector off.
    Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)
    AUT O OFF
    ENABLE1
    AUT O OFF
    DISABLE
    0
    When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector 
    lamp will go off and the power indicator begins blinking. Please 
    refer to the section “Turning off the power” (17).
    LAMP TIME
    The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp.
    Pressing the RESET button on the remote control or the button ► of the projector displays a dialog.  To reset the lamp time, select the 
    RESET using the button ▲.
    RESET 
     CANCEL
    • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.• For the lamp replacement, see the section "Lamp" (43, 44).
    FILTER TIME
    The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter.Pressing the RESET button on the remote control or the button ► of the projector 
    displays a dialog. To reset the filter time, select the RESET using the button ▲.
    RESET  CANCEL
    • Please reset the filter time only when you have cleaned or replaced 
    the air filter, for a suitable indication about the air filter.
    • For the air filter cleaning, see the section "Air filter" (45).
    With  the 
    OPTION
      menu,  the  items  shown  in  the  table  below  can be performed. 
    Select  an  item  using  the  cursor  buttons  ▲/▼  on  the  projector  or 
    remote  co ntrol, and  press  the  cursor  button  ►  on  the  projector 
    or  remote  control,  or  the  ENTER  button  on  the  remote  control  to 
    execute  the  item , except  for  the  items  LAMP  TIME  and  FILTER 
    TIME. Then perform it referring to the following table.
     MENU [RGB]
     PICTURE
       :SELECT
     
     IMAGE
     SETUP INPUT
     OPTION NETWORK EASY MENU
     SCREEN
     AUTO OFF      0min LAMP TIME     0h FILTER TIME   0h
     AUTO SEARCH  TURN OFF
     SERVICE 
    						
    							
    39
    
    Multifunctional settings
    ItemDescription
    SERVICE
    Selecting this item displays the SERVICE menu.Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item.FAN SPEED   AUTO ADJUST   GHOST  KEY LOCK  FILTER MESSAG  FACTORY RESET       FAN SPEEDUsing the buttons ▲/▼ switches the rotation speed of the cooling 
    fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.
    HIGH  NORMAL
    AUTO ADJUST
    Using the buttons ▲/▼ enables/disables the automatic adjustment.When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.
    ENABLE  DISABLE
    • Depending on conditions, such as input image, signal cable to the 
    projector, environment around the projector, etc., the automatic adjustment 
    may not work correctly.  In such a case, please choose DISABLE to 
    disable the automatic adjustment, and make adjustment manually.
    GHOST
    1.  Select a color element of ghost using the buttons ◄/►. 2.  Adjust the selected element using the buttons ▲/▼ to disappear ghost.
    KEY LOCKUsing  the  buttons  ▲/▼  turns  on/off  the  key  lock  feature.  When  TURN  ON  is 
    selected, the buttons on the projector except the STANDBY/ON button are locked.
    TURN ON   TURN OFF• Please use to avoid a mischief and touching accidentally. This 
    function does not have any effect on the remote control.
    FILTER MESSAGE
    Use the ▲/▼ button to set the timer for the interval to show the 
    message for cleaning up the air filter. 
    50h  100h  200h  300h   TURN OFFAfter selecting “50h”, “100h”, “200h”, or “300h”, the message 
    “CLEAN THE AIR FILTER” will appear after the timer reaches the 
    interval time set by the menu. (38) When the “TURN OFF” is 
    chosen, the air filter cleaning message will not appear.
    •  Please check and clean the air filter periodically, even if there is no 
    message. If the air filter becomes to be blocked by dust or others, 
    the internal temperature will rise, which could cause malfunction, or 
    reduce the lifetime of the projector.
    • It is recommended to choose “100h” in general. Please be careful with the operating environment of the projector and the condition of 
    the air filter, especially when the “200h”, “300h or “TURN OFF” is chosen. 
    FACTORY RESET
    Selecting RESET using the button ▲ performs this function.  By this function, all the items in all of menus will collectively return to the initial setting. Note 
    that the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.
    RESET  CANCEL
    OPTION Menu (continued) 
    						
    							
    40
    
    NETWORK Menu
     MENU [RGB]
     IMAGE  SETUP
     PICTURE
     INPUT
     OPTION
     EASY MENU  SCREEN:SELECT
     NETWORK
     IP ADDRESS SUBNET MASK
     DATE AND TIME
     DHCP TURN OFF
     DEFAULT GATEWAY
     TIME DIFFERENCE
     e‑SHOT INFORMATION
    Multifunctional settings
    ItemOperation
    DHCP 
    (Dynamic Host  Configuration 
    Protocol) DHCP TURN ON/TURN OFF:
     Use the ▲/▼ 
    buttons to turn DHCP on/off
    TURN ON  TURN OFF
    Select TURN OFF when the network does not have  DHCP 
    enabled.
    IP ADDRESS Entering the IP ADDRESS :
     Use the ▲/▼/◄/► buttons to enter the IP 
    ADDRESS. This function can only be used 
    when DHCP is set to “TURN OFF”.
    ~Note~ 
    The IP ADDRESS is the number that identifies this projector on the 
    network. You cannot have two devices with the same IP ADDRESS 
    on the same network.
    SUBNET MASK Entering the SUBNET MASK :
     Use the buttons ▲/▼/◄/► to enter the 
    same SUBNET MASK used by your PC. 
    This function can only be used when DHCP 
    is set to “TURN OFF”.
    Select 
    [Network]
     from  the  main  menu  to  access  the  following functions.
    NOTE
      • The factory default setting for DHCP is “TURN ON”. There is no need to set 
    up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network 
    has DHCP enabled.
     ( User’s Manual - Network Functions)
    • If you are not utilizing SNTP ( User’s Manual - Network Functions), then you must 
    set the DATE AND TIME during the initial installation. Please refer to the item DATE AND 
    TIME on the following list.
    DHCPTURN ONTURN OFF
    NOTE  Consult with your network administrator before connecting to an existing 
    access point on your network. Incorrect network settings on this projector may cause 
    trouble on the network.
    192. 168. 254
    IP ADDRESS
    1.
    255.
    255.0
    SUBNET MASK 255. 
    						
    All Hitachi manuals Comments (0)

    Related Manuals for Hitachi Cp-S245 Users Manual