Hitachi Cp-S225wa Users Manual

ENGLISH
1
LCD Projector CP-S225/CP-X275
USERS MANUAL   USERS MANUAL  Vol.2 (Extended)
Thank you for purchasing this projector.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual 
• The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International...

MAIN Menu
ItemDescription
BRIGHT Adjust Brightness:Light ñDark
CONTRASTAdjust Contrast:Strong ñWeak
ASPECT
Select Aspect Ratio:
At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO
Input:
4:3 ñ16:9
At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:4:3 ñ16:9 ñSMALL
• The SMALL picture may not be displayed correctly with certain input signals.
PICT.POSIT.Select Picture Position (for 16:9/SMALL Picture):
TOP ñCENTER ñBOTTOM
GAMMASelect Gamma Mode:
NORMAL...

ENGLISH
PICTURE-1 Menu
PICTURE-2 Menu
With the PICTURE-1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
With the PICTURE-2 menu, the four items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
ItemDescription
COLOR BAL R Adjust Red Color Balance:Dark ñLight
COLOR BAL BAdjust Blue Color Balance:Dark ñLight
SHARPNESSAdjust Sharpness (for...

MULTIFUNCTIONAL SETTINGS (continued)
INPUT Menu
With the INPUT menu, the four items shown in the Table below can be
performed. With inputting of RGB IN signal, the horizontal and vertical
frequencies of the signal will be displayed on the initial screen of the
INPUT menu.
Perform each operation in accordance with the instructions in the Table.
4
ItemDescription
AUTO 
Auto Adjust (for RGB):Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the maximum window size....

ENGLISH
SCREEN Menu
With the SCREEN menu, the two items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
5 SCREEN Menu
ItemDescription
BLANK
Selection of BLANK Screen:
.. ñ. . ñ..
The BLANK Screen may be voluntarily selected. The BLANK Screen is
displayed when the screen has been erased (i.e., made to vanish) by
manipulating the BLANK button (please refer to the “Temporarily Blanking the
Screen” section of the separate booklet,...

MULTIFUNCTIONAL SETTINGS (continued)
OPTION Menu
With the OPTION menu, the five items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTIONVOLUME
AUTO OFF
WHISPER
LAMP TIME
FILTER TIME
12
ItemDescription
VOLUMEAdjust Volume:High ñLow
AUTO OFF
Adjust AUTO OFF Time: 
Long (MAX. 99 min.) ñShort (Min. 1 min.) ñ(DISABLE: 0 min.)
The system automatically enters the standby mode if...

ENGLISH
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED 
Related Messages
When the units power is ON, messages such as those shown below may be displayed. When
any such message is displayed on the screen, please respond as described below.
7
Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be
reappeared every time the power is turned ON.
Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of
usage, a...

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)
Regarding the Indicator Lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the
TEMP indicator have the meanings as described in the Table below.
Please respond in accordance with the instructions within the Table.
POWER
indicatorLAMP
indicatorTEMP
indicatorDescription
The orange
lamp is lightedTurned OFF
(Not lighted)Turned OFF
(Not lighted)The STANDBY mode is set
Flashing of the green lampTurned OFFTurned OFFThe...

ENGLISH
9
Phenomena That May Easily Be Mistaken for Machine Defects
Before requesting repair, check in accordance with the following chart.
If the situation cannot be corrected, then contact your dealer.
Although bright spots or dark spots may appear on the screen, this is a unique characteristic of
liquid crystal displays, and such do not constitute or imply a machine defect. 
NOTE
PhenomenonCases not involving a machine defectItems to be confirmedReference
Page(s)
Power does not
come ON
The main power...

Dimension Diagram
Unit : mm
289
84
52.5
74.5
215
60
ItemSpecification
Product nameLiquid crystal projector
Liquid
crystal
panelPanel size1.8 cm (0.7 type)
Drive systemTFT active matrix
PixelsCP-S225480,000 pixels (800 horizontal x600 vertical)
CP-X275786,432 pixels (1024 horizontal x 768 vertical)
LensZoom lens F=2.0 ~ 2.3  f=18 ~ 21 mm
Lamp150 W UHB
Speaker1.0W
Power supplyAC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A
Power consumption240W
Temperature range0 ~ 35°C (Operating)
Size289 (W) x 84 (H) x 215...