Hitachi Cp-Rs56 Users Manual
Have a look at the manual Hitachi Cp-Rs56 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5 Phenomena that may easily be mistaken for machine defects (continued) PhenomenonCases not involving a machine defectReference page No pictures are displayed. The lens cover is closed. Remove the lens cover.4, 7 The signal cables are not correctly connected. Correctly connect the connection cables.3, 4 The brightness is adjusted to an extremely low level. Adjust the BRIGHT to a higher level using the menu function or the remote control. 6, 8 The computer cannot detect the projector as a plug and play monitor. Make sure that the computer’s can detect a plug and play monitor using other plug and play monitor. 3 Colors have a faded- out appearance, or Color tone is poor. Color settings are not correctly adjusted. Perform picture adjustments by changing the COLOR TEMP, COLOR, TINT and/or COLOR SPACE settings, using the menu functions. 6, 9 33 COLOR SPACE setting is not suitable. Change the COLOR SPACE setting to AUTO, RGB, SMPTE40 , REC709 or REC60. 33 Pictures appear dark. The brightness and/or contrast are adjusted to an extremely low level. Adjust the BRIGHT and/or CONTRAST settings to a higher level using the menu function. 6, 8 The WHISPER function is working. Select the NORMAL to the item WHISPER in the SETUP menu. 7, 35 The lamp is approaching the end of its product lifetime. Replace the lamp. 4, 43, 45 Pictures appear blurry. Either the focus and/or horizontal phase settings are not properly. Adjust the focus using the focus ring, and/or H PHASE using the menu function. 0, 3 The lens is dirty or misty. Clean the lens by referring to the section “Caring for the lens”. 46 Troubleshooting NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not c\ onstitute or imply a machine defect.
5 Specifications NOTE • This specifications are subject to change without notice. Warranty and after-ser vice / Specifications Warranty and after-service If a problem occurs with the equipment, first refer to the “Troubleshooting” (47) and run through the suggested checks. If this does not resolve the problem, please contact your dealer or the service company. They will tell you what warranty condition is applied. ItemSpecification Product nameLiquid crystal projector Liquid Crystal panel Panel sizeCP-RS56 : .4 cm (0.55 type) CP-RX6 : .5 cm (0.6 type) Drive systemTFT active matrix PixelsCP-RS56 : 480,000 pixels (800 horizontal x 600 vertical) CP-RX6 : 786,43 pixels (,04 horizontal x 768 vertical) LensF=.60 ~ .88 f=8.6 ~ .3 mm Lamp65W UHB Power SupplyAC00-0V/.7A, AC0-40V/.5A Power Consumption40W Temperature range5 ~ 35°C (Operating) Size 85 (W) x 73 (H) x 0 (D) mm (Not including protruding parts) • Please refer to the following figure. Weight (mass).3 kg Ports Optional parts LampDT0070 Air filterNJ09 Others• Please consult your dealer. RGB input: RGB .....D-sub 5pin mini x RGB Output: RGB OUT ...D-sub 5pin mini x Communication port: CONTROL ........D-sub 9pin x Video input: VIDEO .....................RCA x S-VIDEO ...........S-Video x Audio input: AUDIO IN ......Stereo mini x Audio Output: AUDIO OUT ....Stereo mini x
53 Specifications Specifications (continued) [unit: mm] 202 285 69 33.57383