Hitachi Cp-Rs56 Users Manual

3

Multifunctional settings
IMAGE menu
ItemDescription
ASPECT
Using the buttons ▲/▼ switches the mode for aspect ratio. 
At a RGB signal 4:3 ó 6:9 ó NORMAL   
At a video signal / no signal4:3 ó 6:9    
• The NORMAL mode keeps the original aspect ratio of the signal.
• At a HDTV component video signal of 5i (080i) or 750p (7 0p), this item can’t be chosen.
• Performing the automatic adjustment initializes the aspect ratio setting.
OVER SCAN
Using the buttons ▲/▼...

3

Multifunctional settings
ItemDescription
H SIZE
Using the buttons ▲/▼ adjusts the horizontal size.
Large ó Small
• This item can be chosen only at a RGB signal.
• When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment pressing the RESET button during this operation.
AUTO ADJUST EXECUTE
Choosing this item performs the automatic adjustment feature.
 At a RGB signal The vertical position, the horizontal position, the horizontal...

33

Multifunctional settings
INPUT menu
ItemDescription
COLOR SPACE
Using the buttons ▲/▼ switches the mode for color space. 
AUTO ó RGB ó SMPTE40 ó REC709 ó REC60      
• This item can be chosen only at a RGB signal or a component video signal.
• The AUTO mode automatically selects the optimum mode. 
• The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.
VIDEO FORMAT
Using the buttons ▲/▼ switches the mode for video...

34

Multifunctional settings
INPUT menu (continued)
ItemDescription
FRAME LOCK
Using the buttons ▲/▼ turns the frame lock function on/off. 
TURN ON ó TURN OFF
• This item performs only at a RGB signal with vertical frequency of 50 to 7 Hz.
• When the TURN ON is selected, a moving picture is displayed more smoothly.
• This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF.
INFORMATION
Choosing this item displays a dialog titled “INPUT INFORMATION”....

35

Multifunctional settings
SETUP menu
ItemDescription
ZOOMUsing the buttons ▲/▼ adjusts the zoom (magnifying power).
Large ó Small
KEYSTONE
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data ó Lower in the data
• The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is \
angled...

36

Multifunctional settings
SCREEN menu
ItemDescription
LANGUAGE
Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
SUOMI ó POLSKIó TÜRKÇE   
ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
NORSK ó NEDERLANDS ó PORTUGUÊS ó 
 ó　　　　 ó        ó SVENSKA ó             
MENU POSITIONUsing the buttons ◄/►/▲/▼ adjusts the menu position.To quit the operation, press the MENU button or keep no operation for 0 seconds.
OSD BRIGHT
Using the buttons ▲/▼ switches the brightness level of the...

37

Multifunctional settings
ItemDescription
START UP
Using the buttons ▲/▼ switches the mode for the start up screen.The start up screen is the screen displayed when no signal or an unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF      
MyScreen is the screen you can register a desired screen.ORIGINAL screen is the existing standard screen. When the TURN OFF is selected, the BLACK screen is used.
• To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to...

38

Multifunctional settings
ItemDescription
MyScreen Lock
Using the buttons ▲/▼ turns on/off the MyScreen lock function.
TURN ON ó TURN OFF
When the TURN ON is selected, the item MyScreen cannot be performed. Use this function for protecting the current MyScreen.
MESSAGE
Using the buttons ▲/▼ turns on/off the message function.
TURN ON ó TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting”NO INPUT IS DETECTED””SYNC IS OUT OF...

39

Multifunctional settings
OPTION menu
ItemDescription
AUTO SEARCH
Using the buttons ▲/▼ turns on/off the automatic signal search function.
TURN ON ó TURN OFF
When the TURN ON is selected, detecting no signal automatically cycles through input ports in order of following. Then when an input is found, the projector will stop searching and display the image. 
RGB  RGB  S-VIDEO  VIDEO       
AUTO OFF
Using the buttons ▲/▼ adjusts the time to count down to automatically turn the projector...

40

Multifunctional settings
ItemDescription
LAMP TIME
The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp.Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the lamp time, select the RESET using the button ▲.
RESET  CANCEL
• Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.• For the lamp replacement, see the section...