Hitachi Cp-Rs55 Projector Users Manual

31

Multifunctional settings
ItemDescription
H SIZE
Using the buttons ▲/▼ adjusts the horizontal size.
Large  Small
• This item can be chosen only at a RGB signal.
• When this adjustment is excessive, the picture may not be 
displayed correctly. In such a case, please reset the adjustment 
pressing the RESET button during this operation.
AUTO ADJUST 
EXECUTE
Choosing this item performs the automatic adjustment feature.
At a RGB signalThe vertical position, the horizontal position, the clock phase and...

32

Multifunctional settings
INPUT menu
ItemDescription
COLOR SPACE
Using the buttons ▲/▼ switches the mode for color space. 
AUTO 
 RGB  SMPTE240  REC709  REC601      
• This item can be chosen only at a RGB signal or a component video signal.
•  The AUTO mode automatically selects the optimum mode. 
• The AUTO operation may not work well at some signals. In such a case, it might be good to select the SMPTE240 or the REC709.
VIDEO FORMAT
Using the buttons ▲/▼ switches the mode for video format....

33

Multifunctional settings
INPUT menu (continued)
ItemDescription
FRAME LOCK
Using the buttons ▲/▼ turns the frame lock function on/off. 
TURN ON  TURN OFF
• This item performs only at a RGB signal with vertical frequency of 50 to 72 Hz.
• When the TURN ON is selected, a moving picture is displayed 
more smoothly.
• This function may cause a certain degradation of the picture. In 
such a case, please select the TURN OFF.
INFORMATION
Choosing this item displays a dialog titled “INPUT INFORMATION”. It...

34

Multifunctional settings
SETUP menu
ItemDescription
ZOOMUsing the buttons ▲/▼ adjusts the zoom (magnifying power).
Large  Small
KEYSTONE
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data  Lower in the data
•  The adjustable range of this function will vary with the type of input 
signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is 
angled...

35

Multifunctional settings
SCREEN menu
ItemDescription
LANGUAGE
Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
SUOMI  POLSKI TÜRKÇE   
ENGLISH  FRANÇAIS  DEUTSCH  ESPAÑOL  ITALIANO
NORSK  NEDERLANDS  PORTUGUÊS  
 　　　　          SVENSKA              
MENU POSITIONUsing the buttons ◄/►/▲/▼ adjusts the menu position.
To quit the operation, press the MENU button or keep no operation 
for 10 seconds.
OSD BRIGHT Using the buttons ▲/▼ switches the 
brightness level of the...

36

Multifunctional settings
ItemDescription
START UP
Using the buttons ▲/▼ switches the mode for the start up screen.The start up screen is the screen displayed when no signal or an unsuitable signal is detected.
MyScreen   ORIGINAL  TURN OFF      
MyScreen is the screen you can register a desired screen.
ORIGINAL screen is the existing standard screen. When the TURN 
OFF is selected, the BLUE screen is used.
• 
To avoid remaining as an afterimage, the MyScreen and the 
ORIGINAL screens will change...

37

Multifunctional settings
ItemDescription
MyScreen Lock
Using the buttons ▲/▼ turns on/off the MyScreen lock function.
TURN ON  TURN OFF
When the TURN ON is selected, the item MyScreen cannot be 
performed. Use this function for protecting the current MyScreen.
MESSAGE
Using the buttons ▲/▼ turns on/off the message function.
TURN ON   TURN OFF
When the TURN ON is selected, the following message function 
works. “AUTO IN PROGRESS” while automatically adjusting
”NO INPUT IS DETECTED”
”SYNC IS OUT OF...

38

Multifunctional settings
OPTION menu
ItemDescription
AUTO SEARCH
Using the buttons ▲/▼ turns on/off the automatic signal search function.
TURN ON   TURN OFF
When the TURN ON is selected, detecting no signal automatically 
cycles through input ports in order of following. Then when an input is found, the projector will stop searching and display the image. 
RGB  S-VIDEO  VIDEO       
AUTO OFF
Using the buttons ▲/▼ adjusts the time to count down to 
automatically turn the projector off.
Long (max....

39

Multifunctional settings
ItemDescription
LAMP TIME The lamp time is the time counted after the last resetting. It is 
shown 
in the OPTION menu as the use time of the lamp. Performing this item resets the time.
Pressing the RESET button on the remote control or the button ► 
on the projector for about 3 seconds displays a dialog to make sure. 
To perform reset, point at RESET using the button ▲.
RESET 
 CANCEL
• Please re set the lamp time  only when you have replaced the lamp, for correct messages...

40
Multifunctional settings
ItemDescription
SERVICE Choosing this item displays the SERVICE menu.
Choose an item using the buttons ▲/▼, and press the button ► or the ENTER button to progress.
FAN SPEED
   AUTO ADJUST
                                       FACTORY RESET  GHOST
FAN SPEED:
Using the buttons ▲/▼ switches the rotation speed of the cooling 
fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.
HIGH  NORMAL
AUTO ADJUST:
Using the...