Hitachi Cp-D31n Users Manual

31
PICTURE menu
Item Description
TINTUsing the ◄/► cursor buttons adjusts the tint.
Reddish 
 Greenish
• This item can be selected when input signals are video, s-video or 
component video signals.
• When input signal is HDMI
TM, this item can also be selected if 
either 1) or 2) applies.
1) HDMI FORMAT is set to VIDEO.
2) HDMI FORMAT is set to AUTO, and the projector recognizes that 
it receives video signals.
SHARPNESSUsing the ◄/► cursor buttons adjusts the sharpness.
Weak 
 Strong
• There may be...

32
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
ASPECTUsing the ▲/▼ cursor buttons switches the mode for aspect ratio. 
For a computer signal
NORMAL 
 4:3 
 16:9 
 16:10 

 NATIVE          
For an HDMITM signal
NORMAL 
 4:3 
 16:9 
 16:10 
 14:9 

 NATIVE     
For a...

33
IMAGE menu
Item Description
H POSITIONUsing the ◄/► cursor buttons adjusts the horizontal position.
Right 
 Left
• Over-adjusting the horizontal position may cause noise to appear on 
the screen. If this occurs, please reset the horizontal position to the 
default setting. Pressing the RESET button on the remote control when 
the H POSITION is selected will reset the H POSITION to the default 
setting.
• When this function is performed on a video signal or s-video signal, 
the range of this...

34
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
PROGRESSIVEUsing the ▲/▼ cursor buttons switches the progress mode.
TV 
 FILM 
 OFF
  
• This function works only for a video signal, s-video signal, 
component video signal or HDMITM signal of 480i@60 or 576i@50.
• When the TV or...

35
INPUT menu
Item Description
VIDEO FORMAT
The video format for the S-VIDEO port and the VIDEO port can be set.
(1)  Use the ▲/▼ cursor buttons 
to select the input port.
S-VIDEO 
 VIDEO
(2)  Using the ◄/► cursor 
buttons switches the mode 
for video format.
AUTO  
  NTSC  
  PAL  
  SECAM
      N-PAL 
 M-PAL 
 NTSC4.43 
• This item is performed only for a video signal from the VIDEO port 
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not...

36
INPUT menu
Item Description
COMPUTER INThe computer input signal type for the COMPUTER IN1 and IN2 
ports can be set.
(1) 
  Use the ▲/▼ cursor buttons to select the COMPUTER IN port to be set.
COMPUTER IN1 
 COMPUTER IN2
(2)
  Use the ◄/► cursor buttons to select  the computer input signal type.
AUTO 
 SYNC ON G OFF
• Selecting the AUTO mode allows  
you to input a sync on G signal or component video from the port.
• In the AUTO mode, the picture may be distorted with certain 
input signals. In...

37
INPUT menu
Item Description
RESOLUTIONThe resolution for the COMPUTER IN1 and the COMPUTER IN2 
input signals can be set on this projector.
In the RESOLUTION menu select the resolution you wish to display 
using the ▲/▼ cursor buttons. 
■AUTO
  Selecting AUTO will set a resolution 
appropriate to the input signal.
■STANDARD
  Pressing the ► cursor (or the ENTER) button 
when selecting a STANDARD resolution 
will automatically adjust the horizontal and 
vertical positions, clock phase and horizontal...

38
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor (or the ENTER) buttonn to execute the item. 
Then perform it according to the following table.
Item Description
D-ZOOM
Using the ◄/► cursor buttons adjusts the magnification ratio.
Small 
 Large
• The on-screen menu might be displayed outside of the image display 
area depending on the adjustment value of the ASPECT, D-ZOOM 
and KEYSTONE....

39
SETUP menu
Item Description
MIRRORUsing the ▲/▼ cursor buttons switches the mode for mirror status.
NORMAL 
 H:INVERT 
 V:INVERT 
 H&V:INVERT
    
If the Transition Detector is on and the MIRROR status is changed, 
the TRANSITION DETECTOR ON alarm (
63) will be displayed 
when projector is restarted after the AC power is turned off.
STANDBY MODEUsing ▲/▼ cursor buttons switches the standby mode setting 
between the NORMAL and the SAVING. 
NORMAL 
 SAVING
• When the SAVING is selected and the...

40
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table 
below can be performed. Select an item using the 
▲/▼ cursor buttons, and press the ► cursor (or the 
ENTER) button to execute the item. Then perform it 
according to the following table.
Item Description
VOLUMEUsing the ◄/► cursor buttons adjusts the volume.
Low 
 High
SPEAKERUsing the ▲/▼ cursor buttons turns on/off the built-in speaker.
ON 
 OFF
When the OFF is selected, the built-in speaker does not work.
AUDIO SOURCEThe...