Hitachi 55pd5200 Users Manual

							49
ENGLISH
Input Signal Screen Display
The TV channel status can be displayed on the screen by
pressing the RECALL button of the remote control.
• The display will go out in approximately 6 seconds.
1
ABCDE
      -- -- Min.
--  --  :  --  --OFFI
TV position
Name
Sound mode
Sound system Off-timer
On-timerTV
4 Pictures2 Pictures (Split)
Main Sub
Sub 1
Sub 2
Sub 3 Main
(: Available)
Input terminalAV1~AV4, ANTAV1, AV2RGB1RGB2TELE
TEXTPAL
SECAMNTSC3.58
NTSC4.43576i
576p480i
480p1080i/501080i/60720p/60STBComponent
AV1
~
AV4
ANTPAL, SECAM
NTSC3.58/4.43
AV1
AV2
576i, 576p
480i, 480p
1080i/50
1080i/60
720p/60
RGB1STB
RGB2Component
MainSub
(: Available)
Input terminalAV1~AV4, ANTAV1, AV2RGB1RGB2TELE
TEXTPAL
SECAMNTSC3.58
NTSC4.43576i
576p480i
480p1080i/501080i/60720p/60STBComponent
AV1
~
AV4
ANTPAL, SECAM
NTSC3.58/4.43
AV1
AV2
576i, 576p
480i, 480p
1080i/50
1080i/60
720p/60
RGB1STB
RGB2Component
MainSub
 
						

							50
OPERATING INSTRUCTIONS (continued)
D / N
A / B i+
MENU
OK
FREEZE
ZOOM
AV 1
RGB1 RGB2 AV 2 AV 3 AV 42-4-12
I / II
P+
P-
+-
DVD
123
456
78
0
9
When the FREEZE button on the remote control is pressed, the screen transfers into the
freeze mode.
• There are two types of freezing screen mode, Split and Strobe. These are possible to select at the “Freeze
Mode” setting of the Function Menu.
• The Split mode will display 2 pictures from the same source on the screen with one active picture and the
other still.
• The Strobe mode will display 12 pictures with the last picture active, while other 11 windows are still.
• Pressing the FREEZE button again changes the screen back to the normal picture.
• This function is also available from video input mode besides TV mode. Refer to the table for Freeze function
as below:FREEZE button
Picture Freezing
AB
5
1234
5678
9101112
Active
[Split]
[Strobe]
SplitStrobe
PAL, SECAM
NTSC3.58/4.43
576i
480i
576p
480p
1080i/50
1080i/60
720p/60
RGB, DVI-PC
(: Available)
FUNCTION MENU
Refer to the page          . (It is same to the Picture Menu of Optional Video Unit Function)
But 1 item is added and 5 items are deleted.
Selected charactersSetup hint
Freeze ModeSplit          StrobeThis selects the display condition of the FREEZE mode between Split
(2 pictures) and Strobe (12 pictures).
Mode DisplayNot Available (grayed out)
ID NumberNot Available (grayed out)
InverseNot Available (grayed out)
Standby WhiteNot Available (grayed out)
GammaNot Available (grayed out)
37
▼
▼
 
						

							51
ENGLISH
SETUP MENU
  Picture
  Audio
  Timer
  Function
  Setup
  Language
     Select
   OK  SetSetup
  Auto Tuning
  Manual Tuning
  Fine Tuning
  Sort
  Auto Off    Off 
     Select            Set              Return
OK
OKMENU
Setup
  Auto Tuning
  Country
    Austria
    Belgium
    Croatia 
    Czech Republic
    Denmark
    Finland  
    France
    Germany
Search     Select            Set                ReturnOK
Setup
  Auto Tuning 
  Country
    Greece
    Hungary
    Iceland 
    Ireland
    Italy
    Netherlands  
    Norway
    Poland
Search     Select            Set                ReturnOK
Setup
 Auto Tuning 
  Country
    Portugal
    San Marino
    Spain 
    Sweden
    Switzerland
    Turkey  
    United Kingdom
Search     Select            Set                ReturnOK
Setup
 Auto Tuning 
  Country
    Portugal
    San Marino
    Spain 
    Sweden
    Switzerland
    Turkey  
    United Kingdom
Search     Select            Set                ReturnOK
Setup
  Auto Tuning
  Manual Tuning
  Fine Tuning
  Sort
  Auto Off    Off 
     Select            Set              Return
OK
Setup
  Auto Tuning
  Manual Tuning
  Fine Tuning
  Sort
  Auto Off    Off 
     Select            Set              Return
OK
Setup
  Auto Tuning
  Manual Tuning
  Fine Tuning
  Sort
  Auto Off    Off 
     Select            Set              Return
OK
Setup
  Manual Tuning
    Position    99
    Search  C 22
    Descrambler  Off
    Name  ABCDE 
    Sound System  BG
    Colour System  Auto
 Skip  Off  
    NR  Off
     Select            Return          Exit
Setup                 Prog.No.199
  Fine Tuning  +56  
     Select            Adjust           Return
Setup
  Sort
   Position  Name  C.S.MHz
    100  ABCDE  471MHz
    101  BBC1  C25
    102  -----  C40 
    103  BBC  C30
    104  FGHIJ  S27
 105  XYZAB S41  
    106  -----  225MHz
    107  -----  C51
     Select            Return          Exit
OK
OK
OK
OK
OK
[During TV mode]
Setup
  Auto Tuning
    Scanning Channel Number: 33
     
             Cancel
OK
Cancel
OK
 
						

							52
OPERATING INSTRUCTIONS (continued)
SETUP MENU (continued)
[During VIDEO signal input]
1 item is added to the Menu shown in the page          .39
Selected charactersSetup hint
Scart OutputTV          Monitor
TV:AV4 (Scart) output will be fixed as TV signal output.
Monitor:AV4 (Scart) output can view the image as on the main unit.
But it is possible to monitor only the composite video signal from
AV1, AV2, or AV3 input that is displayed on the screen at the time.
•  If Descrambler is set to On, it will be fixed as TV automatically.
▼
▼
Selected charactersSetup hint
Auto Tuning
Country(Page1)          (Page2)          (Page3)
Select the country name by 
▼▲ 
SELECT buttons and press OK
button.
•  If some required stations could not be preset in this auto tuning
function, select and preset the required station in the required
position by the manual tuning operation.
Search––Press the OK button and it starts the auto tuning.
Manual Tuning
Position1          2          3••••••199         AV00Set the position number. This also can be set by
▼▲  
PROGRAM
UP/DOWN buttons.
Search
(C--)
(S--)
(--MHz)––At first, select the channel entry method, entering a two digit channel
number(CH), entering a two digit S-band number or entering a three
digit frequency(MHz), by pressing the OK button.
––Enter two digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.
––Enter two digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.
––Enter three digit number by pressing 0~9 NUMBER buttons. If the
number is normal, then it starts the channel search.
DescramblerOff          OnSet this to Off normally. If it is set to On, AV4 (Scart) terminal operates
as TV signal output, and the screen changes to display AV4 (Scart)
input signal automatically.
Name(   :a letter)
This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by 
▼▲ 
SELECT
buttons and move to next digit by      ADJUST button. Press the OK
button again after finished.
•  Selectable letters are “ 0” ~`” 9” , ” A” ~`” Z” , “ +” , “ – ” , ” ” (blank),
” ,” (comma) and ” .” (period) .
Sound SystemBG         I         DK
L         LSelect the sound system through the 5 different settings.
Colour SystemAuto         PAL         SECAM
NTSC3.58         NTSC4.43Select the colour system through the 5 different settings.
SkipOff          OnIf this is set to On, that position will be skipped while selecting
positions by PROGRAM UP/DOWN buttons.
This is automatically set to On for those non-broadcasting channels.
NROff          OnIf this is set to On, it helps to reduce the noise interference visible on
the screen, especially in the weaker signal reception areas.
Fine TuningDecreasing the frequency
data for the main tuner Increasing the frequency
data for the main tuner.After completing the fine-tuning, press the RETURN button to exit this
mode.
•  The variable range is -56 ~ +56.
Sort
(A Line of position List)––
Press OK button at the a line that is required to change order, then
the characters will change to green. And move it up or down in the
list by pressing 
▼▲ 
SELECT buttons. And press OK button to
complete it. Press the RETURN button to exit.
Auto OffOff          OnIf this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.
▼
▼
▼
 
						

							53
ENGLISH
OTHER FUNCTIONS
A2 / NICAM / Sound Multiplex
• The CH I / II button is only useful for NICAM and sound multiplex signals.
Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears in yellow as shown on
right.
Press the CH I / II button to select the sound to be heard.
Each time the button is pressed, I, II or 
▼ (force mono) appear cyclically on the screen.
When receiving NICAM signals, NICAM display will appear as below.
8
NICAM [II]
[I][II]
NICAM [I]NICAM [II]
Sound multiplex signal received
SelectI,II or      (force mono) to hear the CH I, CH II or MONO broadcast respectively.
NICAM signal received
Yellow
YellowYellow
YellowGreen
Green
NICAM
Sound multiplex signal received
Select       or     (force mono) to hear the STEREO or MONO broadcast respectively.
NICAM signal received
RedGreen
RedGreen
8STEREO sound broadcast
When a stereo program is received, sound mode display will appear in red, and you can
press the CH I / II button to select between stereo and mono sound.
Each time the button is pressed, or ▼(force mono)appear cyclically on the screen.
When receiving NICAM signals, NICAM display will appear as below.
Monaural sound broadcast
When a monaural program is received, sound mode display will appear in green.
You can press the CH I / II button to select the sound mode between monaural and forced
mono (sound is same).
Each time the button is pressed,       or 
▼ (force mono) appear cyclically on the screen.
NOTE
• If sound signal is not strong enough for quality reception, press the CH I / II button until 
▼ appears on the screen to receive a clear mono sound.
• If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the CH I / II button until
▼ appears
on the screen to receive a clear mono sound.
8
 
						

							54
OPERATING INSTRUCTIONS (continued)
DVD Player Selection
• You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control
simultaneously.
Example
To operate HITACHI DVD player, press and hold the RECALL button, followed by the button.1
NOTE
• Not all models of the listed brands can be operated using this remote control.
Brands of DVD PlayerPressBrands of DVD PlayerPress
HitachiRCA
PioneerMitsubishi
PanasonicOnkyo
ToshibaZenith
PhilipsOrion
JVCShinco
SamsungSkyworth
SonyBubuko
RECALL1
RECALL2
RECALL3
RECALL4
RECALL5
RECALL6
RECALL7
RECALL8
RECALL9
RECALL0
RECALLINDEX
RECALLMODE
RECALLSUB PAGE
RECALLCANCEL
RECALLREVEAL
RECALLTV/TEXT
RECALL button
TV / TEXT button
MODE button
REVEAL buttonINDEX button
SUB PAGE buttons
CANCEL button
D / N
A / B i+
MENU
OK
FREEZE
ZOOM
AV 1
RGB1 RGB2 AV 2 AV 3 AV 42-4-12
I / II
P+
P-
+-
DVD
123
456
78
0
9
OTHER FUNCTIONS (continued)
 
						

							55
ENGLISH
Make the checks suggested below depending on the symptoms observed.  If the symptoms remain uncorrected, contact your dealer.
Customer servicing can be hazardous.
WARNING
TROUBLESHOOTING
Symptoms That Seemingly Appear to be Failures
SymptomPossible reasonRemedy
(1) Connection of antenna cable to the TV is
poor.
(2) Corroded or poor antenna connections.
(3) Antenna has moved position.
(4) Adverse weather conditions.
(5) Transmitter problems.(1) Make new connection and/or change antenna
plug.
(2) Make new connections or renew cable.
(3) Re-align antenna.
(4) None.
(5) Check with local Operator.
(1) Antenna has moved position. 
(2) TV not tuned correctly.
(3) Adverse weather conditions.
(4) Transmitter problems.
(5) AV Input not set correctly.(1) Re-align antenna.
(2) Re-tune or fine tune TV.
(3) None.
(4) Check with local Operator.
(5) Check the external equipment connected.
(1) Interference from electrical or mechanical
motors, fluorescent lights, portable
radios etc.(1) Check devices for shielding and renew if
necessary or move further from TV.
(1) TV may be in AV mode.
(2) Picture/sound setting set to minimum.
(3) TV in standby or power save mode.(1) Press the INPUT SELECT button or      to      buttons
on your remote control to return to normal TV
mode.
(2) Check picture / sound controls (go to  MAIN
MENU).
(3) Press POWER ON / OFF button.09
snowy picture - poor sound
multiple images - sound O.K
intermittent interference
no picture or sound
 
						

							56
This table shows the specifications when the optional video unit and tuner unit have been inserted.
PRODUCT SPECIFICATIONS
• The monitor takes at least 30 minutes to attain the status of optimal picture quality.
Panel
Display
dimensionsApprox. 55 inches (1229 (H) x 691 (V) mm, diagonal 1410mm)
Resolution1366 (H) x 768 (V) pixels
Net dimensions
(excluding Speakers/Stand)1394 (W) x 857 (H) x 105 (D) mm
Net weight
(excluding Speakers/Stand)63.5kg
Ambient
conditionsTemperatureOperating : 5 C to 35 C, Storage : 0 C to 40 C
Relative humidityOperating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supplyAC100 - 240V, 50/60Hz
Power consumption/at standby530W / 
						

							57
ENGLISHThank You for purchasing this Hitachi Television.
In the unlikely event that this product should develop a fault, we undertake to repair
or replace any part of the product which fails due to a manufacturing defect within
12 months of the date of purchase provided that ...
1. the product has been installed and used only in accordance with the instructions
supplied with the product.
2. the product has not been repaired, maintained, or modified by any person other
than a Hitachi authorized dealer.
3. the product serial number has not been removed or altered.
•this guarantee does not apply to a product acquired second hand or for
commercial or communal use.
•this guarantee does not cover the replacement of exhausted batteries, the
adjustment of user controls, or aerial alignment.
•any parts replaced under this guarantee shall become the property of HITACHI
EUROPE LTD..
•please note that evidence of the date of purchase will be required before any
service under this guarantee is carried out.
Use the boxes provided below to record your TV’s Model and Serial Number - these are found
on the rating plate located on the rear of the Plasma screen and on the bottun of the AVC. Also,
record where and when you purchased this T.V. This information will help any future queries you
may have and should be used in all correspondence with Hitachi service centres.
SERIAL NUMBERMODELDEALER/STOREDATE PURCHASED
This guarantee does not affect your statutory rights.
In all cases of difficulty please 
consult your Hitachi dealer.
 
						

							
 Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111  
HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email:  [email protected]    
HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: [email protected]     
HITACHI EUROPE GmbH Munich Office Dornacher Strasse 3 D-85622 Feldkirchen bei München GERMANY Tel: +49-89-991 80-0 Fax: +49-89-991 80-224 Hotline: +49-180-551 25 51 (12ct/min) Email: [email protected]    
HITACHI EUROPE S.A. Gran Via Carlos III, 86, planta 5
 Edificios Trade - Torre Este08028 Barcelona 
SPAIN 
Tel: +34 93 409 2550 
Fax: +34 93 491 3513 
Email: [email protected]   
HITACHI EUROPE srl Via Tommaso Gulli N.39, 20147 Milano, Italia ITALY Tel: +39 02 487861 Tel: +39 02 38073415 Servizio Clienti Fax: +39 02 48786381/2 Email: [email protected]    
HITACHI Europe AB Box 77 S-164 94 Kista SWEDEN  Tel: +46 (0) 8 562 711 00 Fax: +46 (0) 8 562 711 13 Email: [email protected]  
HITACHI EUROPE S.A.S Lyon Office B.P. 45, 69671 BRON CEDEX FRANCE  Tel: +33 04 72 14 29 70 Fax: +33 04 72 14 29 99 Email: [email protected] 
  
HITACHI EUROPE LTD (Norway) AB  STRANDVEIEN 18 1366 Lysaker NORWAY  Tel: 67 5190 30 Fax: 67 5190 32 Email: [email protected]  
HITACH EUROPE AB Egebækgård Egebækvej 98 DK-2850 Nærum DENMARK Tel: +45 43 43 6050 Fax: +45 43 60 51 Email: [email protected] 
   
HITACHI EUROPE AB Neopoli / Niemenkatu 73 FIN-15140 Lahti FINLAND Tel : +358 3 8858 271 Fax: +358 3 8858 272 Email: [email protected]  
Hitachi Europe Ltd Bergensesteenweg 421 1600 Sint-Pieters-Leeuw BELGIUMTel: +32 2 363 99 01 
Fax: +32 2 363 99 00 Email: [email protected] 
HITACHI EUROPE LTD Na Sychrove 975/8 101 27 Praha 10 – Bohdalec CZECH REPUBLIC Tel: +420 267 212 383 
Fax: +420 267 212 385 Email: [email protected]   
www.hitachidigitalmedia.com