Hitachi 42pd6000ta Users Manual

ENGLISH 
 
 21
 
  INSTALLATION INSTRUCTIONS (continued) 
 
    Connecting to an Audio Visual Device (continued)  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NOTES: 
• If the Video OUTPUT (Monitor) terminal is connected to an  external monitor with a 75 Ohm terminal, it is possible to 
view the same image as on the  main unit. But it is possible to monitor only the TV signal, Composite Video signal or 
the S-Video signal that is displayed on the screen at the time....

 
 
22 
I  
INSTALLATION INSTRU CTIONS (continued) 
 
    Connecting to a PC 
 
(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of 
this device.  See PRODUCT SPECIFICAT IONS concerning the specifications of this device  40  ~  42  . 
(2) Make sure that the power switch of the personal computer is turned off. 
(3) Connect the signal input terminal (PC RGB INPUT) on the rear panel of this device to the display signal output 
   terminal of...

ENGLISH 
 
 23
  
  INSTALLATION INSTRUCTIONS (continued) 
 
  Power Cord Connection 
 
Connect the power cord, after completing all other connections. 
 
 
①  Connect the power cord to this device. 
②  Use the binders to fix the power cord.
 
③  Connect the power cord plug to the power outlet. 
(The type of plug is different from this drawing for some countries.)  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
① 
③...

 
 
24 
 
  OPERATING INSTRUCTIONS 
 
                                         Turning Power On and Off
 
 
 
 
 
 
 
 
 
 
 
                                            
  
Indicating lamp 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
  
 
 
 
 
 
 
 Indicating Lamp Power Status Operating  
Off Off When the main power 
switch is set to OFF. 
Lights Red Off 
(Stand-by) 
When the main power 
switch is ON, and the 
POWER button is OFF.
 
Lights Orange Off 
(Power Save) When the main power 
switch is ON, and the...

ENGLISH 
 
 25
 
  OPERATING INSTRUCTIONS (continued) 
 
 
 
 
 
 
 
 
 
 
  Input Switching 
 
• Input can be switched in the sequence of Analog RGB ➝

HDMI  ➝
Composite-Video  ➝
S-Video  ➝ YC
BCR ➝  YPBPR  
➝   TV by pressing the INPUT button of the control panel. 

RGB      HDMI     Composite-Video           
 
TV    YPBPR    YCBCR     S-Video      
• Input can be switched to TV by pressing CHANNEL  S/T   
buttons or NUMBER buttons of the remote control. 
• Input can be switched by pressing the PC,...

 
 
26 
 
  OPERATING INSTRUCTIONS (continued) 
 
   Input Signal Screen Display 
 
The input signal status can be displayed on the screen by pressing the RECALL button of the remote control. 
• The display will go out in approximately  3 seconds. 
 
TV 
 
 
 
 
 
 
 
 
 
 
VIDEO/PC RGB 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Analog RGB
  1024X768 60Hz
1
ABCDE  5¾ I5¿TV position 
Channel name
Sound mode 
Signal mode 
Input frequency 
RECALL button

HITACHI MODEL...

ENGLISH 
 
 27
 
  OPERATING INSTRUCTIONS (continued) 
 
  Using the Menu Screen (On-screen display system) 
 
Control panel j 
1. Press MENU of the control panel to display the OSD on your Plasma TV. 
2. Use the CHANNEL  ·À and VOLUME W X  to navigate to different menu item. 
3. Use the VOLUME  W X  to adjust functions. 
4. Press ENTER of the control panel to select functions. 
5. Press EXIT of the control panel  to quickly exit from a menu. 
 
Remote control j 
1. Press MENU on the remote control to...

 
 
28 
 
  OPERATING INSTRUCTIONS (continued) 
 
   Video Menu 
 
TV/Video Mode  
Selected characters  W  X Setup hint  
Picture Mode  
   Natural      Cinema       Dynamic   
  Natural: This setting is 
for normal lighting conditions. 
Cinema: This setting is  best for watching movie. 
Dynamic: This setting is best for  very bright ambient lighting. 
Brightness Black is subdued for 
increased overall 
darkness. Black is set off for 
increased overall 
brightness. 
Adjust to preference. 
Contrast...

ENGLISH 
 
 29
 
  OPERATING INSTRUCTIONS (continued) 
 
  Image Menu 
 
TV/Video Mode  
Selected characters  W  X Setup hint  
Panoramic        4:3 Standard 
  16:9 Zoom         4:3 Zoom1 
 
        Full             4:3 Zoom2 
(Available for TV/480i/480p/576i/576p/HDMI 
signals.) 
P.  S I Z E  
Panoramic              Full 16:9 Zoom 
(Available for 720p/1080i/HDMI signals.)   
 
 
 
Adjust to preference. (Please refer to    14    for more detail.) 
Border Color Setting 
 
Black        Gray 
  Adjust to...

 
 
30 
 
  OPERATING INSTRUCTIONS (continued) 
 
   Audio Menu 
 
Selected characters  W  X Setup hint  
Mute Disable        Enable 
  Adjust to turn off the sound. 
Volume Turns down the 
volume. Turns up the volume. This is to set the volume for speaker. 
Balance  Suppresses right-side 
sound. Suppresses left-side 
sound. 
Adjust to preference. 
Treble  Suppresses treble.  Enhances treble.  Adjust to preference. 
(When SRS WOW select “On”, this
 function is not available) 
Bass Suppresses bass....