Hitachi 28ld5000ta Service Manual

							11
28LD5200E (PW1L) 
O : Should be adjusted

 : Should be followed previous data
Function
ADJ. No. Adjustment Items Mode Maximum
Value DefaultFormatter
PWB VIDEO
PWB TUNER
PWB LCD
PANEL
Changed Component
376 CM_THRESHOLD (D15-D8) - 254 0
377 CM_THRESHOLD (D7 -D0) - 254 36
378 Sharpness Gain(RF M) MAIN 15 11
379 Sharpness Gain(RF M) Sub 15 11
380 Sharpness f0 (RF M) Main 3 2
381 Sharpness f0 (RF M) SUB 3 2
382 Counting value of 2ms Sync.Detect MAIN - -
383 Counting value of 2ms Sync.Detect SUB - -
384 TB1274 Read Data(00h) Main - -
385 TB1274 Read Data(01h) Main - -
386 TB1274 Read Data(00h) Sub - -
387 TB1274 Read Data(01h) Sub - -
388 MSP Read Data (CNTROL ) (D15-D8 )
--
389 MSP Read Data (CNTROL ) (D7 -D0 ) --
390 MSP Read Data (STANDARD_RES) (D15-D8 ) --
391 MSP Read Data (STANDARD_RES) (D7 -D0 ) --
392 MSP Read Data (STATUS ) (D15-D8 ) --
393 MSP Read Data (STATUS ) (D7 -D0 ) --
394 TA1370G Read Data(00h) Video board side - -
395 TA1370G Read Data(01h) Video board side - -
396 TA1370G Read Data(00h) Formater side - -
397 TA1370G Read Data(01h) Formater side - -
398 uPD64084 Read Data(00H) --
399 uPD64084 Read Data(01h) --
400 Language (Refer to below) 60
401 Hotel Mode(0:No,1:Yes) 10
402 Analog Data (0:Keep EEPROM,1:Not Keep to EEPROM) 10
403 Maximum Volume Limit 63 63
404 Power Mode(0:Last mode, 1:Pos1, 2:V1, 3:V2, 4:V3, 5:V4) 50
405 Channel Select(0:CCIR, 1:CHINA) 10
406 Auto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan) 20
407 T/TEXT(0: None, 1:Yes) 11
408 TEXT Language 70
409 IIC BUS Data/Clock Open(0:Close, 1:Open) 10
410 Channel Preset(0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM,4:AUSTRALIA) 41
411 Detect and Displsy Tele-Cinema (0:normal 1:Tele Cinema) --
412 V FREQ 60Hz Force (0:None, 1:Yes) Main/Sub 1 0
413 COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC,...) Main - -
414 COLOR SYSTEM CONTROL-MODE(0:BW, 2:3.58NTSC, 3:4.43NTSC,...) Sub - -
415 Horizontal Filter SW [HHPF0] NTSC 1 0
416 Enhancer Gain [HHPF1] PAL 1 0
417 Enhancer Gain [HHPF2] HD 1 0
418 Horizontal Coring Level(Enhancer Gain) AS[HECOR0_PO] NT1-RF 15 1
419 Horizontal Coring Level(Enhancer Gain) AS[HECOR1_PO] PAL1-RF/Multi 15 1
420 Horizontal Coring Level(Enhancer Gain) [HECOR2_PO] NT1-Video 15 1
421 Horizontal Coring Level(Enhancer Gain) [HECOR3_PO] PAL1-Video 15 1
422 Horizontal Coring Level(Enhancer Gain) [HECOR4_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 0
423 Horizontal Coring Level(Enhancer Gain) [HECOR5_PO] HD2/HD3/HD9/HD10 15 1
424 Horizontal Coring Level(Enhancer Gain) [HECOR6_PO] HD1/HD4/HD5/HD6/HD7/HD8 15 0
425 Horizontal Coring Level(Enhancer Gain) [HECORPC_PO] PC 15 1
426 Horizontal Coring Level(Enhancer Gain) EU[HECORE_PO] PAL1-RF/multi 15 1
427 Vertical Coring Level(Enhancer Gain) AS[VECOR0_PO] NT1-RF 15 1
428 Vertical Coring Level(Enhancer Gain) AS[VECOR1_PO] PAL1-RF/multi 15 1
429 Vertical Coring Level(Enhancer Gain) [VECOR2_PO] NT1-Video 15 1
430 Vertical Coring Level(Enhancer Gain) [VECOR3_PO] PAL1-Video 15 1
431 Vertical Coring Level(Enhancer Gain) [VECOR4_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 0
432 Vertical Coring Level(Enhancer Gain) [VECOR5_PO] HD2/HD3/HD9/HD10 15 0
433 Vertical Coring Level(Enhancer Gain) [VECOR6_PO] HD1/HD4/HD5/HD6/HD7/HD8 15 0
434 Vertical Coring Level(Enhancer Gain) [VECORPC_PO] PC 15 0
435 Vertical Coring Level(Enhancer Gain) EU[VECORE_PO] PAL1-RF/multi 15 0
436 Horizontal Coring Level(Enhancer Gain) AS[HECOR0_P1] NT1-RF 15 1
437 Horizontal Coring Level(Enhancer Gain) AS[HECOR0_P2] PAL1-RF/multi 15 1
438 Horizontal Coring Level(Enhancer Gain) [HECOR0_P3] NT1-Video 15 0
439 Horizontal Coring Level(Enhancer Gain) [HECOR0_P4] PAL1-Video 15 1
440 Horizontal Coring Level(Enhancer Gain) [HECOR0_P5] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 0
441 Horizontal Coring Level(Enhancer Gain) [HECOR0_P6] HD2/HD3/HD9/HD10 15 1
442 Horizontal Coring Level(Enhancer Gain) [HECOR0_P7] HD1/HD4/HD5/HD6/HD7/HD8 15 1
443 Horizontal Coring Level(Enhancer Gain) [HECORPC_P1] PC 15 1
444 Horizontal Coring Level(Enhancer Gain) EU[HECORE_P1] PAL1-RF/multi 15 1
445 Vertical Coring Level(Enhancer Gain) AS[VECOR0_P1] NT1-RF 15 1
446 Vertical Coring Level(Enhancer Gain) AS[VECOR0_P2] PAL1-RF/multi 15 1
447 Vertical Coring Level(Enhancer Gain) [VECOR0_P3] NT1-Video 15 1
448 Vertical Coring Level(Enhancer Gain) [VECOR0_P4] PAL1-Video 15 1
449 Vertical Coring Level(Enhancer Gain) [VECOR0_P5] NT2/NT3/NT4/PAL2/PAL3/PAL4 15 1
450 Vertical Coring Level(Enhancer Gain) [VECOR0_P6] HD2/HD3/HD9/HD10 15 15
451 Vertical Coring Level(Enhancer Gain) [VECOR0_P7] HD1/HD4/HD5/HD6/HD7/HD8 15 0
452 Vertical Coring Level(Enhancer Gain) [VECORPC_P1] PC 15 0
453 Vertical Coring Level(Enhancer Gain) EU[VECORE_P1] PAL1-RF/multi 15 0
454 YFRNR Input Gain (Main) 2pictures [MYNRG0] except HD-HD 7 1
455 
\b	
\f

\
 HD-HD 7 4
456 
  NT-*/PAL-* 7 1
457 [MYNRG3] HD-* 7 4
458 YFRNR Input Gain(Sub) [YCNRG0] 2pictures 7 4
459 [YCNRG1] 4pictures/12pictures 7 1
460 CFRNR Input Gain 8Main) 2pictures [MCNRG0] except HD-HD 7 3
461 
						

							12
28LD5200E (PW1L) 
O : Should be adjusted

 : Should be followed previous data
Function
ADJ. No. Adjustment Items Mode Maximum
Value DefaultFormatter
PWB VIDEO
PWB TUNER
PWB LCD
PANEL
Changed Component
470 [MYNRP8]
HD1/HD4/HD5/HD6/HD7/HD8 7 0
471 YFRNR Transition Level (Main/Sub) [MCNRP0] NT1/PAL1/multi 7 2
472 [MCNRP5] NT1/PAL1-video 7 2
473 [MCNRP6] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 2
474 [MCNRP7] HD2/HD3/HD9/HD10 7 2
475 [MCNRP8] HD1/HD4/HD5/HD6/HD7/HD8 7 0
476 Vertical Enhancer [YVEG0_P0] NTSC/PAL(-except RF) 15 8
477 [YVEG1_P0] HD2/HD3/HD9/HD10 15 12
478 [YVEG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 15 8
479 AS[YVEG3_P0] PAL1-RF/multi 15 8
480 EU[YVEG0_E_P0] PAL1-RF/multi 15 8
481 Vertical RGB Gain For Y/G [YVDSBG0_P0] NTSC/PAL/multi 3 0
482 [YVDSBG1_P0] HD2/HD3/HD9/HD10 3 0
483 [YVDSBG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 0
484 Vertical RGB Coring For Y/G [YVDSBG0_P0] NTSC/PAL/multi 7 0
485 [YVDSBG1_P0] HD 7 3
486 Vertical Enhancer Clip for Y/G [YVECLP0_P0] NTSC/PAL/multi 1 1
487 [YVECLP1_P0] HD 1 1
488 Vertical Clip Offset level [YVECLP0_P0] NTSC/PAL/multi 15 7
489 [YVECLP1_P0] HD 15 1
490 Vertical Non Linear Peaking for Y/G [YVNLP0_P0] NTSC/PAL/multi 63 0
491 [YVNLP1_P0] HD 63 0
492 Horizontal HPF Peak Freq SW for Y/G [YHHPF0_P0] NTSC/PAL/multi 3 2
493 [YHHPF1_P0] HD2/HD3/HD9/HD10 3 1
494 [YHHPF2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 1
495 Horizontal Enhancer Gain for Y/G [YHEG0_P0] NTSC/PAL(except -RF) 15 15
496 [YHEG1_P0] HD2/HD3/HD9/HD10 15 15
497 [YHEG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 15 0
498 AS[YHEG3_P0] PAL1-RF/multi 15 15
499 EU[YHEG0_E_P0] PAL1-RF/multi 15 15
500 Hrozontal DSB Gain for Y/G [YHDSBG0_P0] NTSC/PAL/multi 3 3
501 [YHDSBG1_P0] HD2/HD3/HD9/HD10 3 0
502 [YHDSBG2_P0] HD1/HD4/HD5/HD6/HD7/HD8 3 0
503 Horizontal DSB Coring for Y/G [YHDSBC0_P0] NTSC/PAL/multi 7 1
504 [YHDSBC1_P0] HD 7 0
505 Horizontal Enhancer Clip for Y/G [YHECLP0_P0] NTSC/PAL/multi 1 0
506 [YHECLP1_P0] HD 1 0
507 Horizontal Clip Offset Level for Y/G AS[YHECLPL0_P0] RF/multi 15 2
508 AS[YHECLPL1_P0] NT1-except RF/PAL1-except RF 15 2
509 [YHECLPL2_P0] HD 15 1
510 EU[YHECLPL0_E_P0] RF/multi 15 4
511 EU[YHECLPL1_E_P0] NT1-except RF/PAL1-except RF 15 4
512 Horizontal Non Linear Peaking for Y/G [YHNLP0_P0] NTSC/PAL/multi 63 0
513 [YHNLP1_P0] HD 63 0
514 Coring Amplitude for Y/G [YCOR0_PO] NT1-RF/PAL1-RF/multi 7 7
515 [YCOR1_PO] NT1-Video/PAL1-Video 7 5
516 [YCOR2_PO] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 3
517 [YCOR3_PO] HD2/HD3/HD9/HD10 7 1
518 [YCOR4_PO] HD1/HD4/HD5/HD6/HD7/HD8 7 1
519 Vertical Enhancer Gain for Y/G [YVEG0_P1] NTSC/PAL(-RF !)1515
520 [YVEG1_P1] HD2/HD3/HD9/HD10 15 4
521 [YVEG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 15 15
522 AS[YVEG3_P1] PAL1-RF/multi 15 15
523 EU[YVEG0_E_P1] PAL1-RF/multi 15 15
524 Vertical DSB Gain for Y/G [YVDSBG0_P1] NTSC/PAL/multi 3 3
525 [YVDSBG1_P1] HD2/HD3/HD9/HD10 3 0
526 [YVDSBG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 2
527 Vertical DSB Coring for Y/G [YVDSBC0_P1] NTSC/PAL/multi 7 7
528 [YVDSBC1_P1] HD 7 0
529 Vertical Enhancer Clip for Y/G [YVECLP0_P1] NTSC/PAL/multi 1 1
530 [YVECLP1_P1] HD 1 0
531 Vertical Clip Offset Level for Y/G [YVECLP0_P1] NTSC/PAL/multi 15 15
532 [YVECLP1_P1] HD 15 8
533 Vertical Non Linear Peaking for Y/G [YVNLP0_P1] NTSC/PAL/multi 63 0
534 [YVNLP1_P1] HD 63 0
535 Horizontal HPF Pead Freq SW for Y/G [YHHPF0_P1] NTSC/PAL/multi 3 2
536 [YHHPF1_P1] HD2/HD3/HD9/HD10 3 2
537 [YHHPF2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 2
538 Horizontal Enhancer Gain for Y/G [YHEG0_P1] NTSC/PAL(except-RF) 15 15
539 [YHEG1_P1] HD2/HD3/HD9/HD10 15 15
540 [YHEG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 15 15
541 AS[YHEG3_P1] PAL1-RF/multi 15 15
542 EU[YHEG0_E_P1] PAL1-RF/multi 15 15
543 Horizontal DSB Gain for Y/G [YHDSBG0_P1] NTSC/PAL/multi 3 2
544 [YHDSBG1_P1] HD2/HD3/HD9/HD10 3 0
545 [YHDSBG2_P1] HD1/HD4/HD5/HD6/HD7/HD8 3 2
546 Horizontal DSB Coaring for Y/G [YHDSBC0_P1] NTSC/PAL/multi 7 7
547 [YHDSBC1_P1] HD 7 7
548 Horizontal Enhancer Clip for Y/G [YHDSBC0_P1] NTSC/PAL/multi 1 0
549 [YHDSBC1_P1] HD 1 0
550 Horizontal Clip Offset Level for Y/G AS[YHCLPL0_P1] RF/multi 15 4
551 AS[YHCLPL1_P1] except NT1-RF/PAL1-except RF 15 4
552 [YHECLPL2_P1] HD 15 5
553 EU[YHECLPL0_E_P1] RF/multi 15 4
554 EU[YHECLPL1_E_P1] NT1-except RF/PAL1-except RF 15 4
555 Horizontal Non Linear Peaking for Y/G [YHNLP0_P1] NTSC/PAL/multi 63 0
556 [YHNLP1_P1] HD 63 0
557 Coring Amplitude for Y/G [YC0R0_P1] NT1-RF/PAL1-RF/multi 7 7
558 [YC0R1_P1] NT1-video/PAL1-video 7 4
559 [YC0R2_P1] NT2/NT3/NT4/PAL2/PAL3/PAL4 7 3
560 [YC0R3_P1] HD2/HD3/HD9/HD10 7 2
561 [YC0R4_P1] HD1/HD4/HD5/HD6/HD7/HD8 7 4
562 Vertical enhancer Gain for B-Y/B, R-Y/R [CVEG0] NTSC/PAL/multi 15 15
563 [CVEG1] HD 15 9
 
						

							13
28LD5200E (PW1L) 
O : Should be adjusted

 : Should be followed previous data
Function
ADJ. No. Adjustment Items Mode Maximum
Value DefaultFormatter
PWB VIDEO
PWB TUNER
PWB LCD
PANEL
Changed Component
564 DSB Gain of Vertical for B-Y/B,R-Y/R [CVDSBG0] NTSC/PAL/multi 3 0
565 [CVDSBG1]
HD 3 0
566 DSB coring of Vertical for B-Y/B,R-Y/R [CVDSBC0] NTSC/PAL/multi 7 0
567 [CVDSBC1] HD 7 0
568 Vertical enhancer Clip for B-Y/B, R-Y/R [CVECLP0] NTSC/PAL/multi 1 0
569 [CVECLP1] HD 1 0
570 Horizontal HPF Peak Freq. SW for B-Y/B, R-Y/R [CHHPF0] NTSC/PAL/multi 3 2
571 [CHHPF1] HD 3 2
572 Horizontal Enhancer Gain for B-Y/B, R-Y/R [CHEG0] NTSC/PAL/multi 15 15
573 [CHEG1] HD 15 9
574 Horizontal DSB Gain for B-Y/B, R-Y/R [CHDSBG0] NTSC/PAL/Multi Picture 3 0
575 [CHDSBG1] HD 3 0
576 Horizontal DSB Coring for B-Y/B, R-Y/R [CHDSBC0] NTSC/PAL/Multi Picture 7 0
577 [CHDSBC1] HD 7 0
578 Horizontal Enhancer Clip fo B-Y/B, R-Y/R [CHECLP0] NTSC/PAL/Multi Picture 1 0
579 [CHECLP1] HD 1 0
580 Coring Amplitude for B-Y/B, R-Y/R [CC0R0] NTSC/PAL/Multi Picture 7 1
581 [CC0R1] HD 7 1
582 B-Y Clamp offset [Except D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
583 R-Y Clamp offset [Except D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
584 B-Y Clamp offset [Except D Sub Component] HD1/4,HD7/8 255 128
585 R-Y Clamp offset [Except D Sub Component] HD1/4,HD7/8 255 128
586 B-Y Clamp offset [Except D Sub Component] HD5/6 255 128
587 R-Y Clamp offset [Except D Sub Component] HD5/6 255 128
588 B-Y Clamp offset [D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
589 R-Y Clamp offset [D Sub Component] NT1/2/3,HD2/3,PAL1/2/3,HD9/10 255 128
590 B-Y Clamp offset [D Sub Component] HD1/4,HD7/8 255 128
591 R-Y Clamp offset [D Sub Component] HD1/4,HD7/8 255 128
592 B-Y Clamp offset [D Sub Component] HD5/6 255 128
593 R-Y Clamp offset [D Sub Component] HD5/6 255 128
594 B-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128
595 R-Y Clamp offset [DVI-STB] 480i/576i/480p/576p/VGA 255 128
596 B-Y Clamp offset [DVI-STB] 1080i-50/1080i-60 255 128
597 R-Y Clamp offset [DVI-STB] 1080i-50/1080i-60 255 128
598 B-Y Clamp offset [DVI-STB] 720p-60 255 128
599 R-Y Clamp offset [DVI-STB] 720p-60 255 128
600 Y OUT LEVEL M (4.5) For Asia Main 63 15
601 Y OUT LEVEL B/G (5.5) For Asia Main 63 13
602 Y OUT LEVEL D/K (6.5) For Asia Main 63 16
603 Y OUT LEVEL I (6.0) For Asia Main 63 14
604 Y OUT LEVEL B/G (5.5) For Europe Main 63 13
605 Y OUT LEVEL D/K (6.5) For Europe Main 63 16
606 Y OUT LEVEL I (6.0) For Europe Main 63 19
607 Y OUT LEVEL L (6.5) For Europe Main 63 13
608 Y OUT LEVEL L' (6.1) For Europe Main 63 12
609 Y OUT LEVEL M (4.5) For US Main 63 13
610 C OUT LEVEL M (4.5) For Asia Main 63 7
611 C OUT LEVEL B/G (5.5) For Asia Main 63 13
612 C OUT LEVEL D/K (6.5) For Asia Main 63 13
613 C OUT LEVEL I (6.0) For Asia Main 63 13
614 C OUT LEVEL B/G (5.5) For Europe Main 63 8
615 C OUT LEVEL D/K (6.5) For Europe Main 63 8
616 C OUT LEVEL I (6.0) For Europe Main 63 3
617 C OUT LEVEL L (6.5) For Europe Main 63 8
618 C OUT LEVEL L' (6.1) For Europe Main 63 8
619 C OUT LEVEL M (4.5) For US Main 63 13
620 Y OUT LEVEL M (4.5) For Asia Sub 63 14
621 Y OUT LEVEL B/G (5.5) For Asia Sub 63 13
622 Y OUT LEVEL D/K (6.5) For Asia Sub 63 15
623 Y OUT LEVEL I (6.0) For Asia Sub 63 13
624 Y OUT LEVEL B/G (5.5) For Europe Sub 63 13
625 Y OUT LEVEL D/K (6.5) For Europe Sub 63 16
626 Y OUT LEVEL I (6.0) For Europe Sub 63 20
627 Y OUT LEVEL L (6.5) For Europe Sub 63 13
628 Y OUT LEVEL L' (6.1) For Europe Sub 63 13
629 Y OUT LEVEL M (4.5) For US Sub 63 13
630 C OUT LEVEL M (4.5) For Asia Sub 63 7
631 C OUT LEVEL B/G (5.5) For Asia Sub 63 13
632 C OUT LEVEL D/K (6.5) For Asia Sub 63 13
633 C OUT LEVEL I (6.0) For Asia Sub 63 13
634 C OUT LEVEL B/G (5.5) For Europe Sub 63 13
635 C OUT LEVEL D/K (6.5) For Europe Sub 63 13
636 C OUT LEVEL I (6.0) For Europe Sub 63 13
637 C OUT LEVEL L (6.5) For Europe Sub 63 13
638 C OUT LEVEL L' (6.1) For Europe Sub 63 13
639 C OUT LEVEL M (4.5) For US Sub 63 13
640 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD mod\
el)) DVI-PC 254 128
641 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD mod\
el)) DVI-STB (With Setup) 254 149
642 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD mod\
el)) DVI-STB (Without Setup) 254 128
643 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD mod\
el)) DSUB-RGB 254 128
644 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD mod\
el)) Expand DSUB-RGB (Reserved) 254 128
645 Contrast Center (CM) ((Contrast Offset (CM) for only WVGA& LCD mod\
el)) DSUB-COMP 254 137
646 Brightness Center (CM) DVI-PC 254 128
647 Brightness Center (CM) DVI-STB 254 128
648 Brightness Center (CM) DSUB-RGB 254 128
649 Brightness Center (CM) Expand DSUB-RGB (Reserved) 254 128
650 Brightness Center Offset DSUB-COMP 254 127
651 Color Center (CM) DVI-PC 127 64
652 Color Center (CM) DVI-STB (480i/576i/480p/576p) 127 62
653 Color Center (CM) DVI-STB (720p-60/1080i-60/1080i-50 127 62
654 Color Center (CM) DVI-STB (VGA) 127 62
655 Color Center (CM) DSUB-RGB 127 64
656 Tint Center (CM) DVI-PC 254 128
657 Tint Center (CM) DVI-STB (480i/576i/480p/576p) 254 128
 
						

							14
28LD5200E (PW1L) 
O : Should be adjusted

 : Should be followed previous data
Function
ADJ. No. Adjustment Items Mode Maximum
Value DefaultFormatter
PWB VIDEO
PWB TUNER
PWB LCD
PANEL
Changed Component
658 Tint Center (CM)
DVI-STB (720p-60/1080i-60/1080i-50 254 128
659 Tint Center (CM) DVI-STB (VGA) 254 128
660 Tint Center (CM) DSUB-RGB 254 128
661 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (480i/576i) 31 14
662 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (480p/576p) 31 10
663 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (720p-60) 31 6
664 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (1080i-60/1080i-50) 31 10
665 Center of Sharpness (HV Enhance Gain for Y) DVI-STB (VGA) 31 10
666 DVI-STB Setup 0:None VGA/Others Yes, 1:All none 2:All have DVI-STB mode 2 0
667 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) DVI-PC 1 0
668 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) DVI-STB 1 0
669 HSYNC De-Jitter 0:Low (Disabled), 1:(High (Enabled) AVC 1 0
670 Offset level of Horizontal CLIP for Y/G AS[YHECLPL3_P0] NT2~4/PAL2~4 15 10
671 EU[YHECLPL3_E_P0] NT2~4/PAL2~4 15 10
672 Offset level of Horizontal CLIP for Y/G AS[YHCLPL3_P1] NT2~4/PAL2~4 15 15
673 EU[YHECLPL3_E_P1] NT2~4/PAL2~4 15 15
674 Y_DL (4.5MHz) For US Main 10 7
675 Y_DL (4.6MHz) For US Sub 10 7
676 Y_DL (5.5MHz PAL/NTSC4.43) For Europe Main 10 4
677 Y_DL (5.5MHz SECAM) For Europe Main 10 1
678 Y_DL (6.0PAL/NTSC4.43) For Europe Main 10 8
679 Y_DL (6.0SECAM) For Europe Main 10 5
680 Y_DL (5.5MHz PAL/NTSC4.43) For Europe Sub 10 2
681 Y_DL (5.5MHz SECAM) For Europe Sub 10 0
682 Y_DL (6.0PAL/NTSC4.43) For Europe Sub 10 4
683 Y_DL (6.0SECAM) For Europe Sub 10 0
684 Y_DL (6.5MHz PAL/NTSC4.43) For Europe Main 10 5
685 Y_DL (6.5MHz SECAM) For Europe Main 10 5
686 Y_DL (6.5MHz PAL/NTSC4.43) For Europe Sub 10 2
687 Y_DL (6.5MHz SECAM) For Europe Sub 10 0
688 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US TV 31 15
689 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US VIDEO 31 15
690 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD5/HD6 31 6
691 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD1/HD4/HD7/HD8 31 10
692 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US HD2/HD3/HD9/HD10 31 10
693 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US NT2/NT3/PAL2/PAL3/NT4/PAL4 31 14
694 Center of Sharpness (HV Enhancer Gain for Y) For Asia/US TEXT(2pictures) 31 15
695 Contrast mode SW (TV) 0:Dynamic 1:Dynamic+Auto TV 1 1
696 V detection(FORMATTER PWB) 0:out of range 128: NO V (or out of spec)\
 255interrupt 50/60Hz 255 -
697 H detection(FORMATTER PWB) 0:out of range 128: NO V (or out of spec)\
 255interrupt 15/28/31/33/45kHz 255 -
698 V detection (VIDEO PWB) 0:out of range 128:NO V 255 interrupt 50/60Hz 255 -
699 H detection (VIDEO PWB) 0:out of range 128:NO V 255 interrupt 15/28/31/33/45kHz 255 -
700 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 55V 50Hz[Natural/Night] mode 2 1
701 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 55V 60Hz[Natural/Night] mode 2 1
702 Dispersion Time of Sustain current 0: 2 Times, 1: 4 times For PC-Movie mode 1 1
703 SMPLING For CCD 255 0
704 POLLING For CCD 255 15
705 START For CCD 7 2
706 TIMEOUT For CCD 30 5
707 STATUS For CCD 7 2
708 CCD-HP For CCD 79 40
709 CCD-CLK For CCD 79 57
710 Sharpness Gain For Main 480i/576i 15 10
711 Sharpness EQ For Main 480i/576i 3 1
712 Sharpness f0 For Main 480i/576i 3 1
713 Cb Offset1 For Main 480i/576i 15 8
714 Cr Offset1 For Main 480i/576i 15 8
715 Y out level For Main 480i/576i 63 15
716 C out level For Main 480i/576i 63 15
717 Sharpness Gain For Sub 480i/576i 15 10
718 Sharpness EQ For Sub 480i/576i 3 1
719 Sharpness f0 For Sub 480i/576i 3 1
720 Cb Offset1 For Sub 480i/576i 15 8
721 Cr Offset1 For Sub 480i/576i 15 8
722 Y out level For Sub 480i/576i 63 15
723 C out level For Sub 480i/576i 63 15
724 Offset value of adjusted TINT for impact to No.42-45 For COMPAL factory 20 11
725 Use item No.724 0:No , 1:Yes For COMPAL factory 1 0
726 Free --
727 Free --
728 Free --
729 Free --
730 Free --
731 Free --
732 Free --
733 Free --
734 Free --
735 Free --
736 Free --
737 Free --
738 Free --
739 Free --
740 Gain adjustment of RGB amplifier (FLAON) Main - - O O
741 Gain adjustment of RGB amplifier Sub - - O O
742 Automatic White Peak Adj. Single Picture mode - - O O
743 Automatic White Peak Adj. Multi Picture mode - - O O
744 EEPROM Initialize(0:No, 1:Yes) 10
745 Enter to service menu of sub mi-con --
 
						

							15
28LD5200E (PW1L) 
 The Expression of input signal mode (format) 
PAL1: RF, S and Composite of PAL/SECAM
PAL2: Component of PAL (YCBCR)
PAL3: Component of PAL (YPBPR)
PAL4: Component of PAL (YCBCR-SCART)
PAL: PAL1-4
NT1: S and Composite of NTSC
NT2: Component of NTSC (YCBCR)
NT3: Component of NTSC (YPBPR)
NT4: Component of NTSC (YCBCR-SCART)
NTSC: NTSC1-4
HD1-6: Component (shown in the table
)
HD7: Component of 1080i/50 (YPBPR)
HD8: Component of 1080i/50 (YCBCR)
HD9: Component of 576p (YPBPR)
HD10: Component of 576p (YCBCR)
HD: HD1-10 of Component
TV: NTSC / HD
PC: PC signal
Video Input System Judgment of
H.Frequency Video Input
Setup  Mode
AV 1
AV 2 PAL 15.75kHz
(576i) Auto PAL2
SDTV/DVD PAL2
HDTV PAL3
NTSC 15.75kHz
(480i) Auto NT2
SDTV/DVD NT2 HDTV NT3
PAL 31.25kHz
(576p) Auto HD10
SDTV/DVD HD10 HDTV HD9
NTSC 31.50kHz
(480p) Auto HD3
SDTV/DVD HD3 HDTV HD2
NTSC 45.00kHz
(720p) Auto HD5
SDTV/DVD HD6 HDTV HD5
PAL 28.125kHz
(1080i) Auto HD7
SDTV/DVD HD8 HDTV HD7
NTSC 33.75kHz
(1080i) Auto HD1
SDTV/DVD HD4 HDTV HD1
 Factory Reset
After all of the adjustments of main chassis are finished, perform FACTORY RESET.
Press the SUB-POWER(
) button, INPUT SELECT() button and   button at the  same time, and hold for 
more than 5 seconds.
The unit is set to factory settings.
 
						

							16
28LD5200E (PW1L) 
Item  AUTOMATIC SIGNAL LEVEL ADJ USTMENT –RGB (1) 
Preparation        Procedure 
(1)  Input the adjustment signal of VGA (60Hz)  format into RGB2 [D-sub] input terminal. 
  (1) Select RGB2 and enter the service adjustment 
mode. 
 the adjustment signal   
 
 
 
 
 
 
 
 
 
 
 
  (2) Select No.740 “RGB Amp. Gain ADJ.” and press 
OK button for more than 2 seconds to start the 
adjustment. 
It will complete the adjustment after the OSD of 
“AUTO MODE” disappeared. 
[Note] Never adjust without use of the specified signal.  If that were done by mistake, the picture would become abnormal in black level, contrast and color. 
In this case, it will be recovered by re-adjustment in the specified way. 
Item  AUTOMATIC SIGNAL LEVEL ADJ USTMENT –RGB (2) 
Preparation        Procedure 
(1)  Input the adjustment signal of 576p or 480p  format into AV1 input terminal.  (1) Select AV1 and enter the service adjustment mode.
  the adjustment signal  (2) Select No.740 “RGB Amp. Gain ADJ.” and press  OK button for more than 2 seconds to start the 
adjustment. 
It will complete the adjustment after the OSD of 
“AUTO MODE” disappeared. 
 
  (3) Select No.741 “RGB Amp. Gain ADJ.” and press  OK button for more than 2 seconds to start the 
adjustment. 
It will complete the adjustment after the OSD of 
“AUTO MODE” disappeared.   
    
 
 
[Note] Never adjust without use of the specified signal.  If that were done by mistake, the picture would become abnormal in black level, contrast and color. 
In this case, it will be recovered by re-adjustment in the specified way. 
The signal level of black area 
should be pedestal level. 
This signal must not be inserted 
characters etc. 
Black White 
0.7V 
The signal level of black area 
should be pedestal level. 
This signal must not be inserted 
characters etc. 
Black White 
0.7V 
 
						

							17
28LD5200E (PW1L) 
Item  COLOR TEMPERATURE ADJ USTMENT -VIDEO 
Preparation       Procedure 
    
[Adjustment of Cool mode]
Enter the service adjustment mode, and confirm that 
Adjustment NO 0,1 are set as 230. NO2 is set as 255.
If initial x and y value are larger than specification, No.0:R drive(cool) will be adjusted(decrease from 230)
No.1:G drive(cool) will be adjusted(decrease from 230)
No.2:B drive(cool) is set as 255
If initial x or y value is smaller than specification. No2:B drive(cool) will be adjusted(decrease from 255),
until one of x,y is in spec and another value is higher than spec.
(* When both x and y are in spec value, it is end of adjustment )
According to a x and y value, the following adjustment of (3)-1 or (3\
)-2.
    (3)-1 If x value is higher than spec.
            No.0:R drive(cool) will be adjusted(decrease from 230)
    (3)-2 If y value is 6higher than spec,
            No1:G drive(cool) will be adjusted(decrease from 230)
            * No.0:R or No.1:Fshould be set as 230
(1)  Set CRT COLOR ANALYZER(CA-210) at the 
center of the screen panel.
(2)  Input the full-white raster signal to AV1  component terminal and select AV1. Signal condition 480i component 
Video level: 0.56Vp-p 
Sync level: 0.286Vp-p 
Setup level: 0V   
(3)      
[Adjustment of Normal mode]
    No Adjustment. (11000K)
    Adjustment No.3,4 and 5 are set as 230.
  Set the diaplay size to "Full".
Set the Contrast mode of picture menu "Auto".
Set the Picture mode of Picture menu “Dynamic”.
 
 
  
  (4)
[Adjustment of Warm mode]     Enter the service adjustment mode, and confirm that  Adjustment NO.6\
,7
    and 8 are all set as 230.
    In factory setting mode
    No.8:B drive(warm) will be adjusted(decrease from 230),
        until one of x,y is in spec and another value is higher than spe\
c.
       (* When both x and y are in spec value, it is end of adjustment \
)
According to x and y value, the following adjustment of (5)-1 or (5)\
-2.
   (5)-1 If x value is higher than spec.
            No.6:R drive(warm) will be adjusted(decrease from 230)
   (5)-2 If y value is higher than spec,
            No7:G drive(warm) will be adjusted(decrease from 230)
No.6 or No.7:Fshould be set as 230.
 
 
(5)
  [Adjustment of Black / White mode] 
  (6)
Enter the service adjustment mode, and confirm Adjustment NO.9,10 
and 11 are all set as 230.
In factory setting mode
    No.11:B drive(B/W) will be adjusted(decrease from 230),
    until one of x,y is in spec and another value is higher than spec.
    (* When both x and y are in spec value, it is end of adjustment.)
According to x and y value, the following adjustment of (7)-1 or (7)\
-2.
   (7)-1 If x value is higher than spec.
            No.9:R drive(B/W) will be adjusted(decrease from 230)
   (7)-2 If y value is higher than spec,
            No.10:G drive(B/W) will be adjusted(decrease from 230)
            No.9 or No.10:should be set as 230.
 
(7)
 
Color Temperature (Cool) for Video 
25000K-6MCD    x=0.257    0.005      y=0.256    0.005 
 
Color Temperature (Warm) for Video 
7500K    x=0.302    0.005      y=0.317    0.005 
 
Color Temperature (B/W) for Video 
5400K    x=0.335    0.005      y=0.343    0.005 
(3) (1)
(2)
 
						

							18
28LD5200E (PW1L) 
Item  COLOR TEMPERATURE ADJUSTMENT -PC 
Preparation        Procedure 
 
  
It is same as color temperature adjustment 
data of video.
Write the data which are inside drive No0 
to No11 into drive N0.12 to No.23 respectively.
Example.  [at VIDEO]           [at PC]
                 No.0  'data'          No.12 'data'
                 No.1  'data'          No.13 'data'
                 No.2  'data'          No.14 'data'
                          -                           -
                          -                           -
                          -                           -
                 No.10 'data'         No.22 'data'
                 No.11 'data'         No.23 'data'
 
						

							19
28LD5200E (PW1L) 
5. Troubleshooting
 
How to get to Burn-in mode
This mode displays the test patterns of some single color raster in turn\
. These signals are from built-in generator 
of LCD monitor.
Using the front control buttons with the set turned off (standby) can activate this mode.
Press the SUB-POWER(
) button, INPUT SELECT() button and VOLUME DOWN() button at the same 
time, and hold for more than 5 seconds.
The set turns on with single color raster and the OSD of [BURN IN: ON].
To escape from this mode, press the SUB-POWER(
) button, INPUT SELECT() button and   button at the 
same time, and hold for more than 5 seconds. Burn-in mode will be releas\
ed.
  How to recover the remote and front key function 
If remote and front key cannot operate after miss set special function b\
y front keys, these functions can recover 
by below method.
Press the SUB-POWER(
) button, INPUT SELECT() button and   button at the  same time, and hold for 
more than 5 seconds.
The set turns on the service menu mode.
Select No.175 and data set from [0] to [1].
Or
Press the SUB-POWER(
) button and   button at the same time, and hold for more than 5 seconds
 
						

							20
28LD5200E (PW1L) 
Ye s[1] +5V
[5] +12V
[3] GND 
Ye s  
Ye s 
Ye s
Speaker  
Picture is displayed. But no sound 
Are the voltages 
applied to EAJ1[1][5]pins  of the Audio PWB?
Are the signals 
applied to EAF1[1][3]pins 
of the Audio PWB? NoNo(low)
Audio PWB 
[1] L ch
[3] R ch
[2] GND
No 
Are there signals 
on Speaker Terminals?
 
Audio PWB 
No 
Formatter PWB or Video PWB 
No 
Ye s  
Power cannot be turned on (LED does not light)
Is the input voltage 
applied to Power supply unit?  (CN5 [1][3])
Is the voltage 
applied to P804[3]pin of Power  supply unit high?
AC
inletPower switch
Are the 
voltages applied to 
P804 [1][8]pins, P806[1]pin   and P808 [1][4][8][12]pins  of Power supply  unit?
[1] +5V
[8] +6V 
[1] +12V 
P804 
P804 [3] 
Power GO  P804 [5] 
Power OFF 
P806 
P808 
[1] +30V
[4] +5V
[8] +12V 
[12] +10V  
Joint / Formatter PWB  Power supply
unit
No 
Ye s  
Joint / Formatter PWB Power 
supply unit  Yes(high)
Yes(high)
  Sub
Power board
Check 
Speaker terminal and  Speaker cord.  Unlocked
Check
Locked
No sound
Are the voltage 
applied to EAJ1[1][5]pins?  (When EAJ1 is 
disconnected.)
Power supply unit
No
No(low)
Is the voltage 
applied to P804[5]pin of Power  supply unit high?