Heckler And Koch HK630, HK770, HK940 Instructions For Use
Here you can view all the pages of manual Heckler And Koch HK630, HK770, HK940 Instructions For Use. The Heckler and Koch manuals for Firearms are available online for free. You can easily download all the documents as PDF.
Page 2
We would like to congratulate you on purchasing our modern semi-automatic rifle. W ith it, you now own a superb hunting rifle. You will quickly become familiar . Special features and advantages: - Modern, well balanced semi- automatic rifle. - Superb accuracy. - Low recoil, thanks to the de- layed roller locked bolt system. - Polygon barrel - Barrel and chamber of high quality special steel alloy, hammer-forged in one operation. - Receiver configurated...
Page 3
Table of Contents Page Design feature 2 Assemblies 4 Loading the rifle 5 Operating the safety 6 Unloading the rifle 6 Field stripping 7 Stripping the bolt assembly 8, 9 Gap between bolt head and bolt carrier 9 Assembling the rifle 10 Sights 10 Telescopic sight clamp mount 11 Mounting the telescopic sight 12 Parts list of the HK 630, HK 770, HK 940 Semi-automatic hunting rifles 13,14,15 Guarantee 15 3
Page 4
Assemblies 1 Upper receiver 2 Bolt, recoil spring and buffer 3 Receiver with barrel, and stock 4 Magazine 4
Page 5
Loading the rifle 5 Press magazine catch, and the magazine will slide out. Insert filled magazine into the rifle until the magazine catch engages. Then retract the bolt all the way by means of the cocking lever on the right side of the rifle. The catch lever located behind the cocking lever will engage and hold the bolt open. Depressing the catch lever slightly will cause the bolt to snap forward, chamber a round...
Page 6
Operating the safety Unloading the rifle 6 All semi-automatic hunting rifles shown in this booklet, provide optimum security, thanks to the striker safety. The safety can only be engaged when the rifle is cocked. To put the rifle on safe, the safety lever must fully cover the red dot. The safety is off when the safety lever fully covers the white dot. Remove the magazine by pressing the magazine catch. Retract cocking lever quickly, tilt-...
Page 7
Field stripping 7 Under normal conditions, it is only necessary to clean the exter- nal components of the rifle and to clean the bore. In the event of heavy fouling or to remove mois- ture or water in the rifle, it is ad- visable to strip the rifle for tho- rough cleaning. Unscrew the hexagon socket screw at the end of the upper receiver all the way. Remove the upper receiver...
Page 8
Stripping the bolt assembly 8 Rotate the bolt head clockwise one quarterturn, and then remove it from the locking piece. Finally, remove locking piece, firing pin and firing pin spring from the bolt head carrier by rotating the lock- ing piece further To assemble the bolt, proceed in the reverse sequence. First slide the firing pin spring onto the firing pin and insert both...
Page 9
Stripping the bolt assembly Gap between bolt head and bolt carrier 9 Attention! When reassembling the semi-automatic hunting rifle, do not forget to insert the locking rollers into the bolt head as otherwise the shooters safety could not be guaranteed and the bolt system of the rifle would be completely damaged With the bolt in its closed position -the magazine being...
Page 10
Assembling the rifle Sights . 10 Insert the bolt assembly into the receiver; when doing this, press in the firing pin and the rollers, and slide all the way to the front. Then insert the buffer and recoil spring into the receiver. Rotate the hexagon socket screw one full turn into receiver. Next, slide the upper receiver onto the re- ceiver body from the rear until the collar of the screw is seated against...