Heckler And Koch HK G3 Maintenance Instructions
Have a look at the manual Heckler And Koch HK G3 Maintenance Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 26 Heckler and Koch manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 2 Spare Parts 38 HECKLER & KOCH
OBERNDORF/NECKAR
G3 Rifle Spare Parts
Version: Retractable butt stock
Page 38
Item Parts Designation Part No. Ident. No.
Qty of parts
Per 100
arms/devices
Remarks
1 2 3 4 5 7 1 Back plate with recoil spring guide tube, recoil spring
and buffer 1013-40.09 200 974 3 2 Gripping lever 1013-40.32 200 951 3 3 Protective cover with locking pins 1013-40.20 200 964 5 4 Clamping lever with ratchet and tension spring 1013-40.23 200 955 3 5 Locking ring with stop ring 1013-40.29 200 952 5 6 Snap ring H 19 x 1.2 922 622 5 7 Retractable butt stock with butt cap 1013-401.50 200 967 3 Spare parts set for back plate, consisting of:
St 1013-200 200 992 10 Also applies to fixed butt
stock Stop pin 1013-04.09 200 523 Guide ring 1013-04.10 200 524 Rivets x2 1013-04.11 200 526
Section 3 Special tools, gauges and fixtures 40 HECKLER & KOCH
OBERNDORF/NECKAR
G3 Rifle Special tools, gauges and fixtures
Page 40
Item Parts Designation Part No. Ident. No.
Qty of parts
Per 100
arms/devices
Remarks
1 2 3 4 5 7 1 Straightening mandrel for cocking lever housing 1013-100 W5 300 573 1 2 Control gauge 1013-100 L1 300 577 1 3 Straightening mandrel for receiver 1013-100 W6 300 574 1 4 GO and symmetry gauge 1013-01.72 L1 300 834 1 5 Chamber cleaning kit 1013 W3/1 300 007 3 6 Spare brush 1013 W3/2 300 008 50 7 NO GO gauge for barrel 1013-01.89 L11 307 713 2 8 Rod for 1013-01.89 L11/1 1013-01.89 L11/2 300 345 2 9 Cleaning rod 1013-101.49 W24 300 751 20
Section 3 Special tools, gauges and fixtures 42 HECKLER & KOCH
OBERNDORF/NECKAR
G3 Rifle Special tools, gauges and fixtures
Page 42
Item Parts Designation Part No. Ident. No.
Qty of parts
Per 100
arms/devices
Remarks
1 2 3 4 5 7 10 Pin punch, dia. 5 957 315 5 11 Pin punch, dia. 4 958 215 5 12 Pin punch, dia. 3.5 957 942 5 13 Pin punch, dia. 2.5 958 214 5 14 Pin punch, dia. 2 958 213 5 15 Center punch, dia. 10 957 323 5 16 Backing-out punch, dia. 4, conically ground 952 227 5 17 Rear sight adjusting tool 1013 W4 300 009 5 18 Spring pin retaining tool 1013-101 W4 300 591 5 19 Spring pin retaining tool 1013-101.53 W1 300 767 5 20 Spring pin retaining tool 1013-02.06 W2 301 105 5 21 Feeler gauge 962235 329 830 5 22 Universal spanner 1013/41 W7 312 387 3 23 Limit gauge for firing pin protrusion 1013-02 L3 322 164 3 24 Extractor protrusion gauge 1013-02.06 L1 312 040 3 25 Bore scope St 510115 954 610 2 26 Caliber plug gauge (set) 1013-01.89 L11/1 300 344 1
Section 3 Special tools, gauges and fixtures 44 HECKLER & KOCH
OBERNDORF/NECKAR
G3 Rifle Special tools, gauges and fixtures
Page 44
Item Parts Designation Part No. Ident. No.
Qty of parts
Per 100
arms/devices
Remarks
1 2 3 4 5 7 27 Assembly fixture 1013-04.21 V2 301 988 1 28 Screwdriver 1013-041 W1 314 875 3 29 Calibrating mandrel for magazine housing 1015-11 W3
1015-10 W3 302 390
316 896 1 Aluminum
Steel (as required) 30 Assembly fixture 1013-02.06 V1 301 101 1 31 Screwdriver, 7 x 140 52 734 050 952 656 5 32 Plastic hammer, dia. 27 mm 51 208 027 957 422 2 33 Assembly fixture 1013-40.09 V17 323 828 1 For retractable butt stock
(without illustration)
Section 3 Special tools, gauges and fixtures 45 This page left blank intentionally…