Hanns G Jw199dpb Users Manual

User’s Manual 
 
11 
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
•  19” Wide screen TFT Color LCD Monitor 
•  Crisp, Clear Display for Windows 
• Recommended Resolutions: 1440 X 900 @60Hz 
•  EPA ENERGY STAR® 
• Ergonomic Design 
•  Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
     
 

 
Screen Base 
Cables and User manual 
  
Power Cord  VGA Cable  DVI-D Cable 
  (dual input mode optional)...

User’s Manual  
12 
INSTALLATION INSTRUCTIONS 
 Install     Remove 
 
      
 
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1.  Align the monitor with the opening in the base. 
2.  Note that the longer secti on of the base points forward. 
3.  Snap the monitor into its base. A clear  click sound will affirm that the base is connected 
correctly. 
4.  Verify that the monitor is securely attac hed to the base by looking at the bottom of the 
base and making sure that the clips are fully...

User’s Manual 
 1
3 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.   
1.  Connect one end of the D-Sub cable to the  back of the monitor and connect the other 
end to the computer’s D-Sub port. 
2.  Connect one end of the DVI-D cable  (Dual input mode optional) to the back of the 
monitor and connect the other end to the computer’s DVI-D port. 
3.  Connect the audio cable between the monito rs audio input and the PCs audio output 
(green port)....

User’s Manual  
14 
ADJUSTING THE VIEWING ANGLE 
 
•  For optimal viewing it is recommended to look at the full face of the monitor, then adjust 
the monitor’s angle to your own preference. 
•  Hold the stand so you do not topple the m onitor when you change the monitor’s angle. 
•  You are able to adjust the monitor’s angle from -5 ° to 20 °. 
 
 
 
Figure.3.  Monitor Angle
 
 
 
NOTES:
 
 
•  Do not touch the LCD screen when you c hange the angle. It may cause damage or 
break the LCD screen. 
•  Be...

User’s Manual 
 1
5 
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS   
   
Press the power button to turn the monitor on or off. The other control buttons are located 
on the front panel of the monitor (See Figure  4). By changing these settings, the picture can 
be adjusted to your personal preferences. 
•  The power cord should be connected. 
•  Connect the Signal cable from the monitor to the VGA card. 
•  Press the power button to turn on the m onitor. The power indicator will light up....

User’s Manual  
16 
FRONT PANEL CONTROL 
 
• Power Button: 
Press this button to switch ON/OFF of monitor’s power.  
 
• Power Indicator: 
— Power On mode. 
Orange — Power Saving mode. 
 
•  MENU / ENTER:  
1. Activate the OSD menu or adjust the function settings and confirmation or 
2. Exit OSD menu when in volume OSD status. 
 
• Adjust:  
1. Activates the volume control when the OSD is OFF. 
2. Navigate through adjustment icons when OSD is ON or adjust a function when 
function is activated. 
 
•...

User’s Manual 
 
17 
HOW TO ADJUST A SETTING 
M
M
a
a
i
i
n
n
 
 
M
M
e
e
n
n
u
u 
 
 
FUNCTION DESCRIPTION  
Brightness  Select the
「Brightness 」option on the 「Main Menu 」. Enter the option by 
pressing the   button again, and adjust the level. 
Contrast Select the
「Contrast 」option on the 「Main Menu 」. Enter the option by 
pressing the   button again, and adjust the level. 
Image Setting Select the
「Image Setting 」on the 「Main Menu 」, and then enter the 
option. 
Color Setting  Select the
「Color...

User’s Manual  
1
8
Clock 
Adjustment  Select the 
「Clock Adjustment 」option to reduce the vertical flicker of 
characters on the screen. Enter  the option and adjust the level. 
Phase 
Adjustment Select the
「Phase Adjustment 」option to reduce the horizontal flicker of 
characters on the screen. Enter the option and adjust the level.  
Exit  Exit the OSD menu function. 
 
 
C
C
o
o
l
l
o
o
r
r
 
 
S
S
e
e
t
t
t
t
i
i
n
n
g
g
 
 
 
FUNCTION DESCRIPTION  
5500K/6500K/ 
9300K   Move the cursor to one of...

User’s Manual 
 1
9
OSD Color Select the
「OSD Color 」setting option to adjust the color of the OSD. 
Enter the option and adjust the level. 
Language  Select the 
「Language 」  option to change the language of the OSD. 
Enter the option and select a language. 
(Reference only, the OSD Language is depended on selected model) 
Exit  Exit the OSD menu function. 
 
 
O
O
t
t
h
h
e
e
r
r
 
 
S
S
e
e
t
t
t
t
i
i
n
n
g
g
 
 
 
FUNCTION DESCRIPTION  
DDC/CI  Select the
「DDC/CI 」option to switch the function On...

User’s Manual  
20 
PLUG AND PLAY   
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC 
STANDARD. It allows the monitor to inform the host system of its identity and, depending 
on the level of DDC used, communicate additional information about its display capabilities. 
The DDC2B is a bidirectional data channel based  on the I²C protocol. The host can request 
EDID information over the DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE NO...