Hanns G Hw191dp Users Manual

User’s Manual  
ADJUSTING THE VIEWING ANGLE 
 
•  For optimal viewing it is recommended to look at the full face of the monitor, and then adjust the 
monitor’s angle to your own preference. 
•  Hold the stand so you do not topple the mon itor when you change the monitor’s angle. 
•  The monitor’s angle is adjustable from 0° to 20° . 
 
 
Figure.3.  Monitor Angle
 
 
 
NOTES: 
 
•  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD 
screen. 
• Be careful not to...

User’s Manual 
 
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS   
   
Press the power button to turn the monitor on or off. The other control buttons are located on the 
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to 
your personal preference. 
 
•  The power cord should be connected. 
•  Connect the Signal cable from  the monitor to the VGA card. 
•  Press the power button to turn on the m onitor. The power indicator will light up. 
 
Figure.4....

User’s Manual  
FRONT PANEL CONTROL 
 
• Power Button: 
Press this button to switch ON/OFF monitor’s power. 
 
• Power Indicator: 
Green — Power On mode. 
Orange — Power Saving mode. 
 
•  MENU / RETURN:   
1. Turn the OSD menu on/off or return to the previous menu. 
2. Exit OSD menu when in volume OSD status. 
 
• Adjust ▲▼:  
1. Adjust Brightness and volume when the OSD is off. 
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is 
activated. 
 
• A Button:...

User’s Manual 
 
HOW TO ADJUST A SETTINGS 
 
BRIGHTNESS/CONTRAST 
BRIGHTNESS 
Adjust the brightness value of the display according to your 
preference. Select「BRIGHTNESS」option to adjust the 
brightness value. 
CONTRAST 
Adjust the contrast value of the display according to your 
preference. Select 「CONTRAST」option to adjust the contrast 
value. 
X-CONTRAST 
Optimal setting for high contrast  images or videos. The dark and 
light areas of the image are automatically detected, and the 
contrast is...

User’s Manual  
H-POSITION 
Select the 「H-POSITION 」option to shift the screen image to the 
left or right. Enter the op tion and adjust the level. [For VGA 
only] 
V-POSITION Select the  「V-POSITION 」option to shift the screen image up or 
down. Enter the option and adjust the level.  [For VGA only] 
CLOCK  
Select the 「CLOCK」option to reduce the vertical flicker of 
characters on the screen. Enter  the option and adjust the level. 
[For VGA only] 
PHASE  
Select the「PHASE 」option to reduce the ho...

User’s Manual 
 
「OSD COLOR」option under  「OSD SETTING 」menu, choose 
modes 1/2/3. 
SYSTEM 
AUDIO INPUT 
While transferring via the HDMI port, it is recommended to set 
AUDIO INPUT to HDMI; if no sound is outputted, it is 
recommended to select AUDIO INPUT as PC, and make sure the 
PC audio output cable is connect ed to monitor’s LINE IN (or 
AUDIO IN) port. [For HDMI Input only]  
VOLUME  
Select the 「VOLUME 」option to change the volume level. Enter 
the option and adjust the level.  [By high volume,...

User’s Manual  
PLUG AND  PLAY   
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
It allows the monitor to inform the host system  of its identity and, depending on the level of DDC 
used, communicate additional information about its display capabilities. The DDC2B is a 
bidirectional data channel based on the I²C protoc ol. The host can request EDID information over the 
DDC2B channel. 
 
THIS MONITOR WILL APPEAR TO BE NON-...

User’s Manual 
 
TECHNICAL SUPPORT (FAQ) 
Q & A FOR GENERAL PROBLEMS   
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on *Check if the Power Switch is in the ON position. 
*Power Cord should be connected. 
No Plug & Play 
*Check if the PC system is Plug & Play compatible. 
*Check if the Video Card is Plug & Play compatible. 
*Check if any plug pins on the VGA or DVI connector are 
bent. 
The display is too dark or too 
bright. *Adjust the Contrast and Brightness Controls. 
Picture bounces or a...

User’s Manual  
and make sure PC audio output cable is connected to 
monitor＇s LINE IN port(or AUDIO IN port).  [For HDMI 
Input only] 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
19 
 

User’s Manual 
 
ERROR MESSAGE & POSSIBLE SOLUTIONS 
 
ƒ  CABLE NOT CONNECTED: 
1. Check that the signal-cable is properly connect ed, If the connector is loose, tighten the 
connector’s screws. 
2.  Check the signal-cable’s connection pins for damage. 
 
ƒ  INPUT NOT SUPPORT: 
Your computer has been set to unsuitable display mode, set the computer to display mode given 
in the following table.   
 
FACTORY PRESET TIMING TABLE:  
 
MODE
 RESOLUTION HORIZONTAL 
FREQUENCY (KHz)
VERTICAL 
FREQUENCY (Hz) 
1...