Hanns G Hp222dj Users Manual
Have a look at the manual Hanns G Hp222dj Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Hanns.G manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
User’s Manual
SETTING THE MONITOR ON THE WALL
DISSEMBLING THE STAND BASE:
1. Disconnect all the cables and cords from the Monitor to prevent breakage.
2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to
prevent any damage to the Monitor.
3. Remove the four (4) screws so that the stand base can be removed.
4. Gently remove the stand base.
(For reference only)
WALL MOUNTING THE MONITOR:
1. Purchase a VESA compatible wall bracket:
VESA 100X100, 4 holes, M4, 10mm, 8kg.
2. Locate your ideal Monitor position on the wall.
3. Fix the wall bracket firmly on the wall.
4. Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor.
Note:
• Please read the instructions of your specific wa ll bracket to properly wall mount the Monitor.
• The pitch of the mounting holes is 10 0mm horizontally and 100mm vertically.
• The screws type required is metric: M4, 10mm length.
• The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of
the stand base.
*Installing the LCD Monitor requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves . Hanns.G bears no responsibility
for improper mounting or mounting t hat results in accident or injury. You can ask a qualified service
personnel about using an optional bracket to mount the Monitor to the wall.
11
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below. 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 2. Connect one end of the DVI cable (optional) to th e back of the monitor and connect the other end to the computer’s DVI port. 3. Connect the audio cable between the monitors audio input and the PCs audio output (green port). 4. Plug one end of the AC power cord to the LCD m onitor’s AC input socket, and the other end to Wall outlet. 5. Turn on your monitor and computer. Figure.2. Connecting to a PC 1 VGA Input 2 DVI Input (optional) 3 AUDIO IN (optional) 4 Power AC Input 12
User’s Manual
ADJUSTING THE VIEWING ANGLE
• For optimal viewing it is recommended to look at the full face of the monitor, then adjust the
monitor’s angle to your own preference.
• Hold the stand so you do not topple the mon itor when you change the monitor’s angle.
• You are able to adjust the monitor’s angle from -5 ° to 15° .
Figure.3. Monitor Angle
NOTES:
• Do not touch the LCD screen when you change th e angle. It may cause damage or break the LCD
screen.
• Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise
pinching can result.
13
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Signal cable from the monitor to the VGA card. • Press the power button to turn on the m onitor. The power indicator will light up. Menu / Return ▲ [－] Brightness adjustment button ▼ [＋] Volume adjustment button Auto adjustment/ Enter 《Analog Input Models 》 Input source change/ Enter 《Digital Input Models》 Power Button Figure.4. Control Panel Buttons 14
User’s Manual
FRONT PANEL CONTROL
• Power Button:
Press this button to switch ON/OFF of monitor’s power.
• Power Indicator:
Green — Power On mode.
Orange — Power Saving mode.
• MENU / RETURN:
1. Turn the OSD menu on/off or re turn to the previous menu.
2. Exit OSD menu when in volume OSD status.
• Adjust < >:
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
•【 AUTO 】Button: 《Analog Input Models 》
1. The OSD menu is used as《confirmation 》function during start-up.
2. The 「Auto adjustment 」 function works only for VGA input. (The auto adjustment function is
used to optimize the 「horizontal position」, 「vertical position 」,「 clock 」,and 「phase」 .)
•【 AUTO 】Button: 《Digital Input Models 》
1. Press【AUTO】to enter Source selecti ons. (Selections include VGA, HDMI, etc. The actual
selections may very depending on the models. This function is only available in models with
digital inputs)
2. The OSD menu is used as《confirmation 》function during start-up.
3. Press and hold this button more than 3 seconds will start 「Auto Adjust 」 function when using
VGA input only. (The auto adjustment function is used to optimize the 「horizontal position」,
「vertical position 」,「clock」,and 「phase」.)
• Hotkeys:
1. Restore Brightness and Contrast defaults:
To reset both the Brightness and Cont rast to their default values, press the 【】 keys
at the same time.
2. ASPECT RATIO:
Press 【MENU】 +【>】 key to change to 「FULL MODE」 or 「FIT MODE」.
3. Change Resolution:
For similar screen display resolutions (see table below), the screen resolution can be changed by
pressing the 【MENU】 +【
User’s Manual Resolution 640x400@70Hz ↔ 720x400@70Hz 640x400@85Hz ↔ 720x400@85Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔1360x768@60Hz 1400x1050@60Hz ↔ 1680x1050@60Hz 1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz 1400x1050@75Hz ↔ 1680x1050@75Hz 1400x900@60Hz ↔ 1600x900@60Hz 1360x768@60Hz ↔ 1366x768@60Hz ** The screen resolutions available will depend on the purchased model. NOTES: • Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock. • Save the original shipping box and packing materials, as they will come in handy if you ever have to ship your monitor. • For maximum protection, repackage your monitor as it was originally packed at the factory. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a m ild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it. 16
User’s Manual
HOW TO ADJUST A SETTINGS
BRIGHTNESS/ CONTRAST
BRIGHTNESS
Adjust the brightness value of the display according to your
preference. Select「BRIGHTNESS」option to adjust the
brightness value.
CONTRAST
Adjust the contrast value of the display according to your
preference. Select 「CONTRAST」option to adjust the contrast
value.
X-CONTRAST
Optimal setting for high contrast images or videos. The dark and
light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the「X-CONTRAST」option.
PRESET MODE
Select the preset mode accord ing to your preference: PC/
MOVIE/ GAME/ ECO
[The availability of this function depends upon the selected
model]
INPUT SETTING
INPUT SETTING
Select the 「INPUT SETTING 」option to change between analog
(VGA) or Digital (DVI) source. Enter the option and select
Analog or Digital. [Dual input mode optional]
AUTO SEARCH
From the Signal Selection menu, select the 「AUTO SEARCH」
option to activate or deactivate the automatic signal search
function. [For DVI/ HDMI Input only]
COLOR SETTING
WA R M
NATURE (6500K)
COOL
Adjust the color temperature va lue of the display according to
your preference: WARM /NATURE/ COOL.
USER
Move the cursor to the User option and select it,
1. To adjust the red, enter the「R」option and adjust the level.
2. To adjust the green, enter the 「G」option and adjust the level.
3. To adjust the blue, enter the 「B」option and adjust the level.
IMAGE SETTING
AUTO ADJUST
The auto adjustment function is used to optimize the
「H-POSITION 」, 「V-POSITION 」,
「CLOCK 」,and 「PHASE」 .
[For VGA Input only]
ASPECT RATIO When the aspect ratio of scr een is distorted, you may make
adjustments by using this function. 「FULL」indicates full screen
17
User’s Manual display, which does not ensure the image is shown as is or in initial scale. 「FIT」indicates scaling by the proportion of original images, which may cause the screen showing black bands. [The availability of this function depends upon the selected model] H-POSITION Select the 「H-POSITION 」option to shift the screen image to the left or right. Enter the op tion and adjust the level. [For VGA only] V-POSITION Select the 「V-POSITION 」option to shift the screen image up or down. Enter the option and adjust the level. [For VGA only] CLOCK Select the 「CLOCK」option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. [For VGA only] PHASE Select the「PHASE 」option to reduce the ho rizontal flicker of characters on the screen. Enter the option and adjust the level. [For VGA only] SHARPNESS Select the「SHARPNESS 」option to adjust the sharpness of the display. Set the value from -2 to 2. VIDEO MODE Choose「VIDEO MODE 」or 「PC MODE 」for video transmission. While using HDMI or HDMI to DVI ports for video transmission, the video will appear cut off slightly around the edge; choose「PC MODE」to view videos with complete image. (VIDEO MODE only functions for inputs from HDMI or DVI that supports HDCP video (YUV format)) RESPONSE TIME Setup the display response time through the Response time function. Available settings are MINIMUM, INTERMEDIATE, and MAXIMUM . [This feature is limited to specific models only.] OSD SETTING LANGUAGE Select 「LANGUAGE 」 option to change the language of the OSD. Enter the option and select a language. [Reference only, the OSD Language depends on the selected model] H-POSITION Select 「H-POSITION 」option to adjust the horizontal position of the OSD. Enter the option and adjust the level. V-POSITION Select 「V-POSITION 」option to adjust the vertical position of the OSD. Enter the option and adjust the level. TRANSPARENCY Select 「TRANSPARENCY 」option to adjust the transparency of 18
User’s Manual
the OSD. Enter the option and adjust the level.
OSD TIME-OUT Select 「OSD TIME-OUT 」option to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
OSD COLOR
To choose the color combination of the OSD window, select
「OSD COLOR 」option under 「OSD SETTING 」menu, choose
modes 1/2/3.
SYSTEM
AUDIO INPUT
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connect ed to monitor’s LINE IN (or
AUDIO IN) port. [For HDMI Input only]
VOLUME
Select the 「VOLUME 」option to change the volume level. Enter
the option and adjust the level. [This function applies only to
models with incorporated audio.]
● By high volume, risk of hearing damage exists.
MUTE
Select the「MUTE」 option to switch the function On or Off. [The
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
DDC/CI Select the 「DDC/CI」option to switch the function On or Off.
[Dual input mode optional]
FACTORY RESET
Select the 「FACTORY RESET 」option to reset to the monitor’s
default setting. This will erase the current settings. Enter the
option and select On or Off.
INFORMATION Display Horizontal frequency/Vertical frequency/Resolution
information.
19
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protoc ol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE NON- FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This monitor meets the Green monitor standard s as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees ( NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no vi deo-input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to power saving mode. This reduces the monitors internal power s upply consumption. After the video input signal is restored, full power is restored and the display is automatically re drawn. The appearance is similar to a Screen Saver feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse. 20