Hanns G Hl251dpb Users Manual

							
 
 
HSG 1085/ HSG 1084 
HSG 1088/ HSG 1083 
HSG 1082/ HSG 1081 
HZ194/HZ201
HZ221/HZ231
HZ251/HZ281
 
						

							
User’s Manual 
 
2 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
 
 
FCC Class B Radio Frequency Interference Statement   
 
This equipment has been tested and found to comp ly with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits  are designed to provide reasonable protection 
against harmful interference in a  residential installation. This equipment generates, uses and can 
radiate radio frequency energy, and if not installed  and used in accordance with the instructions, may 
cause harmful interference to radio communications. Ho wever, there is no guarantee that interference 
will not occur in a particular inst allation. If this equipment does cau se harmful interference to radio 
or television reception, which can be determined  by turning the equipment off and on, the user is 
encouraged to try to correct  the interference by one or more of the following measures: 
ƒ   Reorient or relocate the receiving antenna. 
ƒ   Increase the separation between  the equipment and receiver. 
ƒ   Connect the equipment into an outlet on a circuit  different from that to which the receiver is 
connected. 
ƒ   Consult the dealer or an experien ced radio/TV technician for help. 
 
The device complies with Parts 15 of the FCC Ru le. Operation is subject to the following two 
conditions ﹕(1) this device may not cau se harmful interference﹔and (2) this device must accept any 
interference received, including interference  that may cause undesired operations. 
 
CANADA 
This Class B digital apparatus meets all requi rements of the Canadian Interference-Causing 
Equipment Regulation.   
 
 
 
This device complies with requirement of  EMC directive 2004/108/EC with regard to 
Electromagnetic Compatibility, and 73/23/EEC and 93/ 68/EEC with regard to Low Voltage directive. 
 
 
Socket-outlet shall be near the eq uipment and shall be accessible. 
 
						

							
                                                                    User’s Manual  
3 
Model: HZ251 & HZ281 
 
 
Congratulations!  
The product you have just purchased  carries the TCO’06 Media Displays 
label. This means that your disp lay is designed and manufactured 
according to some of the strictest pe rformance and environmental criteria 
in the world. The manufac turer of this display has selected it to be 
certified to TCO’06 Media Displa ys as a sign of usability, high 
performance and reduced impact  on the natural environment.     
Products certified to TCO´06 Media Displays are  specifically designed for high quality reproduction 
of moving images.  Features such as luminan ce, color rendition and response time are important 
when watching TV or working with media, graphi cs, web design and other applications that demand 
outstanding moving images. *    
Other features of TCO’06 Media Displays :   
Ergonomics   
• Good visual ergonomics and image quality in orde r to reduce vision and strain problems. Criteria 
  for luminance, contrast, resolution, reflect ance, color rendition and response time.   
Energy  
• Energy saving mode – beneficial both  for the user and the environment   
• Electrical safety   
 
Emissions   
• Low electromagnetic fields  surrounding the display   
Ecology   
• Product is designed for recycli ng. Manufacturer must have a certi fied environmental management 
    system such as EMAS or ISO 14 001   
• Restrictions on   
o Chlorinated and brominated flame retardants and polymers   
o Hazardous heavy metals such as cadmium,  mercury, hexavalent chromium and lead.   
 
All TCO labelled products are verified and certifi ed by TCO Development, an independent third 
party labelling organization. For over 20 years, TC O Development has been at the forefront of 
moving the design of IT equipment in a more user-f riendly direction. Our criteria are developed in 
collaboration with an international group of resear chers, experts, users and manufacturers. Since the 
program’s inception, TCO labelled products have  grown in popularity and are now requested by 
users and IT-manufacturer s all over the world.   
Full specifications and list s of certified products can be found on our homepage –   
www.tcodevelopment.com 
 
* For a display used primarily for conventiona l work tasks such as word processing, we 
recommend a display certified to  our office display series TCO’03 Displays or later version. 
 
TCOF1106 TCO Document Version 1.0  
 
 
						

							
User’s Manual 
 
4 
RECYCLING INFORMATION 
 
We, the  Hanns.G  care very much about our environment prot ection strategy and firmly believe that 
it helps us have healthier earth  via appropriate treatment and  recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, whic h can be re-decomposed and re-integrated into 
brand-new marvels. On the contra ry, other material can be classified to hazardous and poisoned 
substances. We strongly encourage  you to contact the provided information to recycle this product. 
  For more information, please visit www.hannsg.com
 
 
 
 
						

							
                                                                    User’s Manual  
5 
TABLE OF CONTENTS 
 
SAFETY NOTICE ........................................................................\
.......................... 6 
PRECAUTIONS .......................................................................\
..........................  6 
SPECIAL NOTES ON  LCD MONITORS ...................................................... 7 
BEFORE YOU OPERAT E THE MONITOR ...................................................... 8 
FEATURES ...................................................................\
......................................  8 
CHECKING THE CONTENTS  OF THE PACKAGE .................................. 8 
INSTALLATION IN STRUCTIONS ................................................................  9 
POWER ......................................................................\
.........................................  9 
MAKING CONNECTIONS .......................................................................\
.....  10 
ADJUSTING THE VI EWING ANGLE .......................................................... 11 
OPERATING INSTRUCTIONS .......................................................................\
.. 12 
GENERAL INSTRUCTIONS .................................................................\
........  12 
FRONT PANEL CONTROL ......................................................................\
.... 13 
HOW TO ADJUST A  SETTINGS ..................................................................  15 
PLUG AND PLAY .......................................................................\
.....................  18 
TECHNICAL SUPP ORT (FAQ) ........................................................................\
. 19 
Q & A FOR GENERA L PROBLEMS ........................................................... 19 
ERROR MESSAGE & POSSI BLE SOLUTIONS ....................................... 21 
APPENDIX .......................................................................\
.....................................  23 
SPECIFICATIONS ....................................................................\
......................  23 
 
 
						

							
User’s Manual 
 
6 
SAFETY NOTICE 
 
1. The changes or modifications  not expressly approved by the pa rty responsible for compliance 
could void the users authority  to operate the equipment. 
2.  Shielded interface cables and AC pow er cord, if any, must be used in order to comply with the 
emission limits. 
3.  The manufacturer is not respons ible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsib ilities of the user to correct such interference. 
 
WARNING: 
To prevent fire or shock hazard, do not expose the  monitor to rain or moisture. Dangerously high 
voltages are present inside the monitor. Do not  open the cabinet. Refer servicing to qualified 
personnel only.  
 
PRECAUTIONS 
•  Do not use the monitor near water, e.g. near  a bathtub, washbowl, kitchen sink, laundry tub, 
swimming pool or in a wet basement. 
•  Do not place the monitor on an unstable cart, stan d, or table. If the monitor falls, it can injure a 
person and cause serious damage to the applianc e. Use only a cart or stand recommended by the 
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a 
mounting kit approved by the manufacturer and follow the kit instructions. 
•  Slots and openings in the back and bottom of th e cabinet are provided for ventilation. To ensure 
reliable operation of the monitor  and to protect it from overheating, be sure these openings are not 
blocked or covered. Do not place the monitor on a  bed, sofa, rug, or similar surface. Do not place 
the monitor near or over a radiator or heat re gister. Do not place the monitor in a bookcase or 
cabinet unless proper ventilation is provided. 
•  The monitor should be operated only from the t ype of power source indicated on the label. If you 
are not sure of the type of power supplied to  your home, consult your dealer or local power 
company. 
•  Unplug the unit during a lighting storm or when it  will not be used for long period of time. This 
will protect the monitor from damage due to power surges. 
•  Do not overload power strips and extension cords.  Overloading can result in fire or electric shock. 
•  Never push any object into the slot on the monito r cabinet. It could short circuit parts causing a 
fire or electric shock. Never  spill liquids on the monitor. 
•  Do not attempt to service the monitor by yourse lf; opening or removing covers can expose you to 
dangerous voltages and other haza rds. Please refer all servicing to qualified service personnel. 
•  The wall socket shall be installed near the equipment and shall be easily accessible. 
 
 
						

							
                                                                    User’s Manual  
7 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD  monitor and do not indicate a problem. 
 
•  Due to the nature of the fluorescent light, the sc reen may flicker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the flicker disappears. 
•  You may find slightly uneven brightness on the  screen depending on the desktop pattern you use. 
•  The LCD screen has effective pixels of 99.99%  or more. It may include blemishes of 0.01% or 
less such as a missing pixel or  a pixel lit all of the time. 
•  Due to the nature of the LCD screen, an afteri mage of the previous screen may remain after 
switching the image, when the same image is disp layed for hours. In this case, the screen is 
recovered slowly by changing the image or  turning off the Power Switch for hours. 
•  If the screen suddenly flashes erratically or the backlighting fa ils, please contact your dealer or 
service center for repair. Do not atte mpt to repair the monitor yourself. 
 
Lamp Disposal 
 
  LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR 
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE 
INFORMATION, CONTACT THE ELECTR
ONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG
. 
FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK  WWW.LAMPRECYCLE.ORG
. 
 
 
						

							
User’s Manual 
 
8 
BEFORE YOU OPERATE THE MONITOR 
FEATURES 
Model: HZ194 HZ201 HZ221 HZ231 HZ251 HZ281 
Size: 18.5”Wide 20”Wide 22”Wide 23”Wide 25”Wide 28”Wide 
Recommended 
Resolutions: 
1366x 768 
@60Hz 
1600x 900 
@60Hz 
1680x1050 
@60Hz 
1920x 1080
@60Hz 
1920x 1080 
@60Hz 
1920x1200 
@60Hz 
•  TFT Color LCD Monitor 
•  Crisp, Clear Display for Windows 
•  EPA ENERGY STAR® (HZ194, HZ201, HZ221, HZ231) 
•  GP Green Product 
• Ergonomic Design 
•    Space Saving, Compact Case Design 
CHECKING THE CONTENTS OF THE PACKAGE 
  The product package should  include the following items: 
LCD Monitor 
   
   
   
 
 
 
Cables and User manual 
            
 
          
Warranty Card            Quick Start Guide           User’s Manual   
                
Power Cord               VGA Cable            DVI Cable (Optional) 
 
                
HDMI To DVI Cable (Optional)        Audio Cabl e       HDMI To HDMI Cable (Optional) 
             
             
 
               
Screw 
 
						

							
                                                                    User’s Manual  
9 
INSTALLATION INSTRUCTIONS 
 
INSTALL   REMOVE
 
     
 
 
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1. Place the monitor face down  on a flat leveled surface. 
2. Align the monitor with the opening in the base. 
3. Turn the screw clockwise to attach the base to the monitor.   
   (The screw is attached on the base  for model HZ194, HZ201, HZ221, HZ231, HZ251) 
   (Find 2 screws in the acce ssory bag for model HZ281.) 
4.  Please assure the monitor is attached to the base and the screw is fully tightened. 
 
REMOVAL: 
 
1. Place the monitor face down  on a flat leveled surface. 
2. Turn the screw counterclockwise to remove th e screw that holding your monitor to the base. 
 
POWER 
 
POWER SOURCE: 
 
1. Make sure that the power cord is th e correct type required in your area. 
2.  This LCD monitor has an Internal  universal power supply that allows operation in either     
100/120V AC or 220/240V AC voltage area  (No user adjustment is required.) 
3.  Connect the AC-power cord one end to your LC D monitor’s AC-input socket, the other end to 
wall-outlet.  
 
 
						

							
User’s Manual 
 
10 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.   
1.  Connect one end of the VGA cable to the back of the monitor and connect the other end to the 
computer’s D-Sub port. 
2.  Connect one end of the DV I-D or HDMI to DVI cable  (optional) to the back of the monitor and 
connect the other end to th e computers DVI-D port. 
3.  Connect one end of the HDMI cable  (optional) to the back of the monitor and connect the other 
end to the computer’s HDMI port. 
4.  Connect the audio cable between the monitors  audio input and the PCs audio output (green 
port). 
5.  Plug one end of the AC power cord to the LCD m onitor’s AC input socket, and the other end to 
Wall outlet. 
6.  Turn on your monitor and computer. 
 
                  HZ194A                         HZ201D; HZ221D; HZ231D; HZ251D 
          
 
HZ201H; HZ231H; HZ251H                           HZ281H 

 
Figure.2. Connecting to a PC 
 
1 Power AC  Input 2 Audio Input 
3 VGA Input 4 DVI Input 
5 HDMI Input   6 Earphone