Hanns G Hl231hpb Users Manual

							
 
 
 
 
HL231 
H S G 1111
OSD[V4.38]
 
						

							
User’s Manual                                                                 OSD[4.38] 
 
Before operating the monitor, please read this ma nual thoroughly. This manual should be retained for 
future reference. 
 
 
FCC Class B Radio Frequency Interference Statement   
 
This equipment has been tested and found to comp ly with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits  are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy, and if not installed  and used in accordance with the instructions, may 
cause harmful interference to radio communications. Ho wever, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cau se harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct  the interference by one or more of the following measures: 
ƒ  Reorient or relocate the receiving antenna. 
ƒ  Increase the separation between  the equipment and receiver. 
ƒ  Connect the equipment into an outlet on a circuit  different from that to which the receiver is 
connected. 
ƒ   Consult the dealer or an experien ced radio/TV technician for help. 
 
The device complies with Parts 15 of the FCC Ru le. Operation is subject to the following two 
conditions ﹕(1) this device may not cau se harmful interference﹔and (2) this device must accept any 
interference received, including interference  that may cause undesired operations. 
 
CANADA 
This Class B digital apparatus meets all requi rements of the Canadian Interference-Causing 
Equipment Regulation.   
 
 
 
This device complies with requirement of EMC directive 2004/108/EC with regard to 
Electromagnetic Compatibility, and 73/23/EEC and 93/ 68/EEC with regard to Low Voltage directive. 
 
 
Socket-outlet shall be near the equipment and shall be accessible. 
 
2 
 
						

							
                                                                    User’s Manual  
RECYCLING INFORMATION 
 
We, the Hanns.G care very much about our environment prot ection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and  recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, whic h can be re-decomposed and re-integrated into 
brand-new marvels. On the contra ry, other material can be classified to hazardous and poisoned 
substances. We strongly encourage  you to contact the provided information to recycle this product. 
 
For more information, please visit 
www.hannsg.com 
 
 
3 
 
						

							
User’s Manual 
 
TABLE OF CONTENTS 
 
SAFETY NOTICE........................................................................\
.......................... 5 
PRECAUTIONS........................................................................\
......................... 5 
SPECIAL NOTES ON LCD MONITORS ...................................................... 6 
BEFORE YOU OPERATE THE MONITOR ...................................................... 7 
FEATURES........................................................................\
................................. 7 
CHECKING THE CONTENTS OF THE PACKAGE .................................. 7 
INSTALLATION INSTRUCTIONS................................................................ 8 
POWER........................................................................\
....................................... 8 
MAKING CONNECTIONS ........................................................................\
...... 9 
ADJUSTING THE VIEWING ANGLE ..........................................................11 
OPERATING INSTRUCTIONS........................................................................\
. 12 
GENERAL INSTRUCTIONS........................................................................\
. 12 
FRONT PANEL CONTROL........................................................................\
.. 13 
HOW TO ADJUST A SETTINGS .................................................................. 15 
PLUG AND  PLAY........................................................................\
.................... 18 
TECHNICAL SUPPORT (FAQ) ........................................................................\
. 19 
Q & A FOR GENERAL PROBLEMS ........................................................... 19 
ERROR MESSAGE & POSSIBLE SOLUTIONS ....................................... 21 
APPENDIX........................................................................\
.................................... 23 
SPECIFICATIONS ........................................................................\
.................. 23 
 
4 
 
						

							
                                                                    User’s Manual  
SAFETY NOTICE 
 
1. The changes or modifications  not expressly approved by the pa rty responsible for compliance 
could void the users authority  to operate the equipment. 
2. Shielded interface cables and AC pow er cord, if any, must be used in order to comply with the 
emission limits. 
3.  The manufacturer is not respons ible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the responsibilities of the user to co rrect such interference. 
4. Only use attachments/accesories specified by the manufacturer. 
 
WARNING: 
To prevent fire or shock hazard, do not expose the  monitor to rain or moisture. Dangerously high 
voltages are present inside the monitor. Do not open the cabinet. Refer  servicing to qualified 
personnel only.  
 
PRECAUTIONS 
• Do not use the monitor near water, e.g. near  a bathtub, washbowl, kitchen sink, laundry tub, 
swimming pool or in a wet basement. 
•  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a  person and cause serious damage to the applianc e. Use only a cart or stand recommended by the 
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a 
mounting kit approved by the manufacturer and follow the kit instructions. 
•  Slots and openings in the back and bottom of th e cabinet are provided for ventilation. To ensure 
reliable operation of the monitor  and to protect it from overheating, be sure these openings are not 
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place 
the monitor near or over a radiator or heat re gister. Do not place the monitor in a bookcase or 
cabinet unless proper ventilation is provided. 
•  The monitor should be operated only from the t ype of power source indicated on the label. If you 
are not sure of the type of power supplied to  your home, consult your dealer or local power 
company. 
•  Unplug the unit during a lighting storm or when it  will not be used for long period of time. This 
will protect the monitor from damage due to power surges. 
•  Do not overload power strips and extension cords.  Overloading can result in fire or electric shock. 
•  Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a 
fire or electric shock. Never  spill liquids on the monitor. 
•  Do not attempt to service the monitor by yourse lf; opening or removing covers can expose you to 
dangerous voltages and other haza rds. Please refer all servicing to qualified service personnel. 
•    The wall socket shall be in stalled near the equipment and shall be easily accessible. 
 
5 
 
						

							
User’s Manual 
 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
•  Due to the nature of the fluorescent light, the sc reen may flicker during initial use. Turn off the 
Power Switch and then turn it on again to make sure the flicker disappears. 
•  You may find slightly uneven brightness on the  screen depending on the desktop pattern you use. 
•  The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or 
less such as a missing pixel or  a pixel lit all of the time. 
•  Due to the nature of the LCD screen, an afteri mage of the previous screen may remain after 
switching the image, when the same image is disp layed for hours. In this case, the screen is 
recovered slowly by changing the image or  turning off the Power Switch for hours. 
•  If the screen suddenly flashes erratically or the backlighting fa ils, please contact your dealer or 
service center for repair. Do not atte mpt to repair the monitor yourself. 
 
 
6 
 
						

							
                                                                    User’s Manual  
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
•  58,4cm / 23” Widescreen LED Backlight Monitor 
•  Crisp, Clear Display for Windows 
•  EPA ENERGY STAR®  
•  GP Green Product 
• Ergonomic Design 
•  Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE    
 
The product package should include the following items: 
LCD Monitor 
 
  
   
 
 
 
Cables and User manual 
    
 
Power Cord 12V DC Adapter Warranty Card Quick Start Guide User’s Manual 
 
  
VGA Cable Audio Cable 
(optional) 
HDMI to DVI 
Cable (optional) HDMI Cable   
(optional) 
DVI Cable 
(optional) 
 
7 
 
						

							
User’s Manual 
 
INSTALLATION INSTRUCTIONS 
 
INSTALL  REMOVE 
 
 
     
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1. Turn the monitor over and set it upside down. 
2. Align the monitor to the slots on the stand. 
3. Please note that the longer edge of  the stand should be facing forward. 
4. Pull the screw ring upwards, then turn the screw cl ockwise to secure. When the stand is securely 
attached to the monitor, pull down the screw ring  to flatten it with the base of the screw. 
5. Check the underside of the stand to ensure that th e monitor has been firmly installed to the stand 
and that the screws do not loosen. 
 
REMOVAL: 
 
1.  Turn the monitor over and set it upside down. 
2. Turn the screw counterclockwise to loosen it. 
3. Detach the stand from the monitor. 
 
POWER 
 
POWER SOURCE: 
 
1. Make sure that the power cord is the correct type required in your area. 
2. This adapter has an Internal universal power su pply that allows operation in either         
100/120V AC or 220/240V AC voltage area  (No user adjustment is required.) 
3. Plug one end of the 12V DC adapter to the LCD m onitor’s DC 12V input socket, plug one end of 
      the AC power cord to the 12V DC adapter AC input socket, and the other end of the AC power   
cord to Wall outlet.   
8 
 
						

							
                                                                    User’s Manual  
MAKING CONNECTIONS 
 
CONNECTING TO A PC    (HL231H) 
 
Turn off your computer before performing the procedure below.   
 
1. Connect one end of the VGA cable to the back of  the monitor and connect the other end to the 
computer’s VGA port. 
2.  Connect one end of the HDMI to DVI cable (optiona l) to the back of the monitor and connect the 
other end to the computer’s DVI port. 
3.  Connect one end of the HDMI cable  (optional) to the back of the monitor and connect the other 
end to the computer’s HDMI port. 
4.  Connect the audio cable between the monitors  audio input and the PCs audio output (green 
port). 
5.  Plug one end of the 12V DC adapter to the LCD m onitor’s DC 12V input socket, plug one end of 
the AC power cord to the 12V DC adapter AC in put socket, and the other end of the AC power 
cord to Wall outlet.   
6.  Turn on your monitor and computer. 
 
 
 
Figure.2. Connecting to a PC 
 
1 Earphone (optional) 2 LINE IN 
3 VGA Input 4 HDMI2 Input (optional) 
5 HDMI1 Input (optional) 6 Power DC 12V Input 
 
 
9 
 
						

							
User’s Manual 
 
CONNECTING TO A PC    (HL231D) 
 
Turn off your computer before performing the procedure below.   
 
1. Connect one end of the VGA cable to the back of  the monitor and connect the other end to the 
computer’s VGA port. 
2.  Connect one end of the DVI cable (optional) to th e back of the monitor and connect the other end 
to the computer’s DVI port. 
3.  Connect the audio cable between the monitors  audio input and the PCs audio output (green 
port). 
4.  Plug one end of the 12V DC adapter to the LCD m onitor’s DC 12V input socket, plug one end of 
the AC power cord to the 12V DC adapter AC in put socket, and the other end of the AC power 
cord to Wall outlet.   
5.  Turn on your monitor and computer. 
 
 
 
Figure.3. Connecting to a PC 
 
1 LINE IN 2 VGA Input 
3 DVI Input (optional) 4 Power DC 12V Input 
10