Hanns G Hk162abb Users Manual

                                                                    User’s Manual  
ADJUSTING THE VIEWING ANGLE 
 
• For optimal viewing it is recommended to look at the full face of the monitor, then adjust the 
monitor’s angle to your own preference. 
• Hold the stand so you do not topple the monitor when you change the monitor’s angle. 
• You are able to adjust the monitor’s angle from -3.5° to 21.5° (±1.5°). 
 
 
 
Figure.3. Monitor Angle 
 
NOTES: 
 
• Do not touch the LCD screen when you change...

User’s Manual 
 
OPERATING INSTRUCTIONS 
 
GENERAL INSTRUCTIONS  
   
Press the power button to turn the monitor on or off. The other control buttons are located on the 
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to 
your personal preferences. 
• The power cord should be connected. 
• Connect the Signal cable from the monitor to the VGA card. 
• Press the power button to turn on the monitor. The power indicator will light up. 
 
 
Menu / Return...

                                                                    User’s Manual  
FRONT PANEL CONTROL 
 
• Power Button: 
Press this button to switch ON/OFF of monitor’s power.  
 
• Power Indicator: 
Green — Power On mode. 
Orange — Power Saving mode. 
 
• MENU / RETURN:  
Turn the OSD menu on/off or return to the previous menu. 
 
• Adjust ▲▼:  
1. Adjust Brightness when the OSD is off. 
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is 
activated. 
 
• Enter...

User’s Manual 
 
 
Resolution 
640x400@70Hz ↔ 720x400@70Hz 
640x480@60Hz ↔ 720x480@60Hz 
1024x768@70Hz ↔ 1280x768@70Hz 
1280x768@60Hz ↔1360x768@60Hz 
1360x768@60Hz ↔ 1366x768@60Hz 
** The screen resolutions available will depend on the purchased model. 
 
 
NOTES: 
 
• Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a 
place subject to direct sunlight, or excessive dust or mechanical vibration or shock. 
• Save the original shipping box and packing...

                                                                    User’s Manual  
HOW TO ADJUST A SETTINGS 
 
BRIGHTNESS/ CONTRAST 
BRIGHTNESS 
Adjust the brightness value of the display according to your 
preference. Select「BRIGHTNESS」option to adjust the 
brightness value. 
CONTRAST 
Adjust the contrast value of the display according to your 
preference. Select「CONTRAST」option to adjust the contrast 
value. 
X-CONTRAST 
Optimal setting for high contrast images or videos. The dark and 
light areas of...

User’s Manual 
 
CLOCK  Select the 「CLOCK」option to reduce the vertical flicker of 
characters on the screen. Enter the option and adjust the level.  
PHASE  Select the「PHASE」option to reduce the horizontal flicker of 
characters on the screen. Enter the option and adjust the level.  
SHARPNESS 
Select the「SHARPNESS」option to adjust the sharpness of the 
display. Set the value from -2 to 2. 
OSD SETTING 
LANGUAGE Select 「LANGUAGE」 option to change the language of the 
OSD. Enter the option and select a...

                                                                    User’s Manual  
PLUG AND PLAY  
 
Plug & Play DDC2B Feature 
 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
It allows the monitor to inform the host system of its identity and, depending on the level of DDC 
used, communicate additional information about its display capabilities. The DDC2B is a 
bidirectional data channel based on the I²C protocol. The host can request EDID information over...

User’s Manual 
 
TECHNICAL SUPPORT (FAQ) 
Q & A FOR GENERAL PROBLEMS 
PROBLEM & QUESTION POSSIBLE SOLUTION 
Power LED is not on *Check if the Power Switch is in the ON position. 
*Power Cord should be connected. 
No Plug & Play 
*Check if the PC system is Plug & Play compatible. 
*Check if the Video Card is Plug & Play compatible. 
*Check if any plug pins on the VGA connector are 
bent. 
The display is too dark or too bright. *Adjust the Contrast and Brightness Controls. 
Picture bounces or a wave...

                                                                    User’s Manual  
Addendum related to Windows 7 
When you encounter display problem under Windows 7, you need to do the following: 
 
1. Make sure your PC computer (Hardware requirement) can support Windows 7. 
2. Make sure your video card can run Windows 7. 
3. If your video card can support Windows 7, need to install the latest Win 7 driver of your video 
card. 
 
Suggest to do the following: 
1. Install the latest Windows 7 video...

User’s Manual 
 
ERROR MESSAGE & POSSIBLE SOLUTIONS 
 
ƒ CABLE NOT CONNECTED: 
1. Check that the signal-cable is properly connected. If the connector is loose, tighten the 
connector’s screws. 
2. Check the signal-cable’s connection pins for damage. 
 
ƒ INPUT NOT SUPPORT : 
Your computer has been set to unsuitable display mode, set the computer to display mode given 
in the following table.  
 
FACTORY PRESET TIMING TABLE: 
 
MODE RESOLUTION HORIZONTAL 
FREQUENCY (KHz)
VERTICAL 
FREQUENCY (Hz) 
1...