Hanns G Hg221ap Users Manual
Here you can view all the pages of manual Hanns G Hg221ap Users Manual. The Hanns.G manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 11
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5° to 20°. Figure.3. Monitor Angle NOTES: • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. • Be careful not to...
Page 12
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Signal cable from the monitor to the VGA card. • Press the power button to turn on the monitor. The power indicator will light up. Figure.4....
Page 13
User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Green — Power On mode. Orange — Power Saving mode. • MENU / ENTER: 1. Turn the OSD menu on/off or return to the previous menu. 2. Exit OSD menu when in volume OSD status. • Adjust ◄ ►: 1. Adjust Brightness and volume when the OSD is off. 2. Navigate through adjustment icons when OSD is ON or adjust a function when function is activated. • [A] Button:...
Page 14
User’s Manual HOW TO ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select「BRIGHTNESS」option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select「CONTRAST」option to adjust the contrast value. X-CONTRAST Optimal setting for high contrast images or videos. The dark and light areas of the image are automatically detected, and the contrast is enhanced...
Page 15
User’s Manual CLOCK Select the 「CLOCK」option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. [For VGA only] PHASE Select the「PHASE」option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level. [For VGA only] SHARPNESS Select the「SHARPNESS」option to adjust the sharpness of the display. Set the value from -2 to 2. OSD SETTING LANGUAGE Select 「LANGUAGE」 option to change the language of the OSD....
Page 16
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE...
Page 17
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the Video Card is Plug & Play compatible. *Check if any plug pins on the VGA connector are bent. The display is too dark or too bright. *Adjust the Contrast and Brightness Controls. Picture bounces or a wave...
Page 20
User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD Size 22” LCD Panel Pixel pitch 0.282mm(H) x 0.282mm(V) H-Frequency 30KHz – 80KHz Video V-Frequency 50 – 75Hz Display Colors 16.7M Colors Max. Resolution 1680 x 1050 @60Hz Plug & Play VESA DDC2BTM ON Mode 55W OFF Mode ≤1W Audio output Rated Power 1 W rms (Per channel) Input Terminal VGA Maximum Screen Size Hor. : 473.76mm Ver. : 296.1mm Power Source 100~240VAC,50±3Hz,60±3Hz Environmental Considerations Operating Temp:...