Hanns G Hg191ap Users Manual
Have a look at the manual Hanns G Hg191ap Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Hanns.G manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor’s angle. • You are able to adjust the monitor’s angle from -5° to 20°. Figure.3. Monitor Angle NOTES: • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. • Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise pinching can result. 11
User’s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Signal cable from the monitor to the VGA card. • Press the power button to turn on the monitor. The power indicator will light up. Figure.4. Control Panel Buttons CONTROL PANEL BUTTONS: 1. Volume < 2. Volume > 3. Menu / Enter 4. Auto Adjustment 5. Power Button 6. Power Indicator 12
User’s Manual FRONT PANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Blue — Power On mode. Orange — Power Saving mode. • MENU / ENTER: 1. Activate the OSD menu or adjust the function settings and confirmation or 2. Exit OSD menu when in volume OSD status. • Adjust < >: 1. Activates the volume control when the OSD is OFF. 2. Navigate through adjustment icons when OSD is ON or adjust a function when function is activated. • AUTO Button: (for D-sub only) When OSD menu is in off status, press and hold this button for more than two seconds to activate the Auto Adjustment function. (The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and Phase.) NOTES: • Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock. • Save the original shipping box and packing materials, as they will come in handy if you ever have to ship your monitor. • For maximum protection, repackage your monitor as it was originally packed at the factory. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it. • Function Key Lock: Press the 「」 and the 「Menu」 buttons simultaneously to enable the Function Key Lock. When the Function Key Lock is enabled, only the Power button is active. Press the 「」 and the 「Menu」buttons simultaneously again to unlock the function keys. 13
User’s Manual HOW TO ADJUST A SETTING MMaaiinn MMeennuu FUNCTION DESCRIPTION Brightness Select the「Brightness」option on the「Main Menu」. Enter the option by pressing the 「Menu」 button again, and adjust the level. Contrast Select the「Contrast」option on the「Main Menu」. Enter the option by pressing the 「Menu」 button again, and adjust the level. Image Setting Select the「Image Setting」on the「Main Menu」, and then enter the option. Color Setting Select the「Color Setting」option on the 「Main Menu」, and then enter the option. OSD Setting Select the「OSD Setting」option on the 「Main Menu」, and then enter the option. Other Setting Select the「Other Setting」option on the 「Main Menu」, and then enter the option. Input Setting Select the「Input Setting」option to change between the analog (D-Sub) or Digital (DVI) source. Enter the option and select Analog or Digital. Exit Exit the OSD menu function. IImmaaggee SSeettttiinngg FUNCTION DESCRIPTION H-position Select the 「H-position」option to shift the screen image to the left or right. Enter the option and adjust the level. V-position Select the 「V-position」option to shift the screen image up or down. Enter the option and adjust the level. 14
User’s Manual Clock Adjustment Select the 「Clock Adjustment」option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. Phase Adjustment Select the「Phase Adjustment」option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level. Exit Exit the OSD menu function. CCoolloorr SSeettttiinngg FUNCTION DESCRIPTION 5500K/6500K/ 9300K Move the cursor to one of the preset options and select it. User Move the cursor to the User option and select it 1. To adjust the red, enter the「R」option and adjust the level. 2. To adjust the green, enter the「G」option and adjust the level. 3. To adjust the blue, enter the「B」option and adjust the level. Exit Exit the OSD menu function. OOSSDD SSeettttiinngg FUNCTION DESCRIPTION OSD H-Position Select the 「OSD H-Position」option to adjust the horizontal position of the OSD. Enter the option and adjust the level. OSD V-position Select the「OSD V-Position」option to adjust the vertical position of the OSD. Enter the option and adjust the level. OSD Time-out Select the 「OSD Time-out」option to set the OSD time out from 10 to 120 seconds. Enter the option and adjust the level. OSD Transparency Select the「OSD Transparency」option to adjust the transparency of the OSD. Enter the option and adjust the level. 15
User’s Manual OSD Color Select the「OSD Color」setting option to adjust the color of the OSD. Enter the option and adjust the level. Language Select the 「Language」 option to change the language of the OSD. Enter the option and select a language. (Reference only, the OSD Language is depended on selected model) Exit Exit the OSD menu function. OOtthheerr SSeettttiinngg FUNCTION DESCRIPTION DDC/CI Select the「DDC/CI」option to switch the function On or Off. (dual input mode optional) Volume Select the 「Volume」option to change the volume level. Enter the option and adjust the level. Sharpness Select the「Sharpness」option to adjust the sharpness of the display. Set the value from 0 to 6. DOS mode Select the「DOS mode」option to set the monitor for use with PC. Enter the option and select 720 × 400 or 640 × 400. Factory Preset Select the「Factory Preset」option to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off. Exit Exit the OSD menu function. 16
User’s Manual PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no video-input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to power saving mode. This reduces the monitors internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a Screen Saver feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse. 17
User’s Manual TECHNICAL SUPPORT (FAQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Check if any plug pins on the D-Sub or DVI-D connector are bent The display is too dark or too bright. *Adjust the Contrast and Brightness Controls. Picture bounces or a wave pattern is present in the picture *Move electrical devices that may cause electrical interference. The power LED is ON (orange) but there’s no video or no picture. *Computer Power Switch should be in the ON position. *Computer Video Card should be snugly seated in its slot *Make sure monitor’s video cable is properly connected to the computer. *Inspect monitor’s video cable and make sure none of the pins are bent. *Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. Missing one of the primary colors (RED, GREEN, or BLUE) *Inspect the monitor’s video cable and make sure that none of the pins are bent. Screen image is not centered or sized properly. * Adjust pixel frequency CLOCK and PHASE or press hot-key (AUTO Button) Horizontal or vertical disturbances on the screen *Use win 95/98/2000/NT/ME/XP shut-down mode Adjust CLOCK and PHASE or perform hot- key (AUTO Button). The screen resolution needs to be adjusted *Use win 2000/ME/XP Right click anywhere on desktop and select Properties>Settings>Screen Resolution. Use the silder to adjust the reslution and click Apply 18
User’s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 19.0 Pixel pitch 0.283mm(H) x 0.283mm(V) Video H-Frequency 31KHz – 80KHz V-Frequency 55 – 75Hz Display Colors 16.2M Colors Max. Resolution 1440 x 900 @75Hz Plug & Play VESA DDC2BTM ON Mode ≤36W Power Saving Mode≤2W EPA ENERGY STAR® OFF Mode ≤1W Audio output Rated Power 1.5 W rms (Per channel) Input Terminal D-Sub DVI-D (Dual-Input Model) Maximum Screen Size Hor. : 408.24mm Ver. : 255.15mm Power Source 100~240VAC,50±3Hz,60±3Hz Environmental Considerations Operating Temp: 0° to 50°C Storage Temp.: -20° to 60°C Operating Humidity: 10% to 80% Dimensions 450 (W) x 389.5(H) x 190(D) mm 17.7 ”(W)×15.3 ”(H)×7.5 ”(D) Weight (NW) 4.8kg (10.6 lb) ***The above specification is subject to actual product specification and is subject to change without prior notice. NOTES: The Maximum Resolution will depends on the display card supporting. Related issue can refer to www.hannsg.com FAQ section. 20