Hanns G Ha192abb Users Manual

 
 
 
 
HA192 
HSG1098
 

User’s Manual 
 
Before operating the monitor, please read this manual thoroughly. This manual should be retained for 
future reference. 
 
 
FCC Class B Radio Frequency Interference Statement   
 
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio...

                                                                    User’s Manual  
RECYCLING INFORMATION 
 
We, the Hanns.G care very much about our environment protection strategy and firmly believe that 
it helps us have healthier earth via appropriate treatment and recycling of industrial technology 
devices at the end-of-life. 
These devices contain recyclable materials, which can be re-decomposed and re-integrated into 
brand-new marvels. On the contrary, other material can be classified to...

User’s Manual 
 
TABLE OF CONTENTS 
 
SAFETY NOTICE........................................................................\
.......................... 5 
PRECAUTIONS........................................................................\
......................... 5 
SPECIAL NOTES ON LCD MONITORS ...................................................... 6 
BEFORE YOU OPERATE THE MONITOR ...................................................... 7...

                                                                    User’s Manual  
SAFETY NOTICE 
 
1.  The changes or modifications not expressly approved by the party responsible for compliance 
could void the users authority to operate the equipment. 
2.  Shielded interface cables and AC power cord, if an y, must be used in order to comply with the 
emission limits. 
3.  The manufacturer is not responsible for any radio or TV interference caused by\
 unauthorized  modification to this equipment. It...

User’s Manual 
 
SPECIAL NOTES ON LCD MONITORS 
 
The following symptoms are normal with LCD monitor and do not indicate a problem. 
 
•  Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. 
•  You may find slightly uneven brightness on the screen depending on the desktop\
 pattern you use. 
•  The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01%...

                                                                    User’s Manual  
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 
 
•  48,3cm / 19” Wide Screen TFT Color LCD Monitor 
•  Crisp, Clear Display for Windows 
•  EPA ENERGY STAR® 
•  GP Green Product 
• Ergonomic Design 
•  Space Saving, Compact Case Design 
 
CHECKING THE CONTENTS OF THE PACKAGE 
   
The product package should include the following items: 
LCD Monitor 
 
Cables and User manual 
   
Power Cord Warranty Card Quick Start Guide...

User’s Manual 
 
INSTALLATION INSTRUCTIONS 
 
INSTALL  REMOVE 
 
 
 
Figure.1. Installing and Removing the Base 
 
INSTALLATION: 
 
1.  Align the monitor with the opening in the base. 
2.  Note that the longer section of the base points forward. 
3.  Snap the monitor into its base. A clear click sound will affirm that the base is connected 
correctly. 
4.  Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the...

                                                                    User’s Manual  
SETTING THE MONITOR ON THE WALL 
DISSEMBLING THE STAND BASE: 
 
1.  Disconnect all the cables and cords from the Monitor to prevent breakage. 
2.  Carefully place the Monitor face down on a soft and flat surface (blank\
et, foam, cloth, etc) to 
prevent any damage to the Monitor. 
3.  Gently remove the stand base.   
     
 
(For reference only) 
 
WALL MOUNTING THE MONITOR: 
 
1.  Purchase a VESA compatible wall...

User’s Manual 
 
MAKING CONNECTIONS 
 
CONNECTING TO A PC 
 
Turn off your computer before performing the procedure below.   
 
1.  Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s VGA port. 
2.  Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet. 
3.  Turn on your monitor and computer. 
 
 
 
 
Figure.2. Connecting to a PC 
 
1 VGA Input 2 Power AC  Input 
 
 
 
 
 
 
10