Haier 7 Por Lcd Tv Manual

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 1 
 
LCD 7” Handheld TV Short Manual 
Rechargeable battery inside in purchased units, our rental have that battery removed.  
     
 
The TV tuner is as good as the best. Easily visible in full sun with good color. We protect the 
LCD with a delicately applied anti-scratch and anti reflection protectio\
n film. External Lithium 
NP-7S battery lasts tested 6 hours. The wide viewing angle enables three people to watch. 
The last channel selected before power...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 2 
 
Brief Tuning Instructions 
 
  Of course you want to receive TV (mode button on right) 
 
How to pre-set your selected channels 
 
First, make sure your monitor antenna is showing “air” 
mode for Modulus, Canatrans, or other UHF Transmitters.  
“CATV” antenna is only to be used for CATV Channel 59 
transmitters. 
 
DO NOT USE SCAN MODE. 
CLOSE MENU. 
 
Now, with your transmitter(s) turned on and tuned to the 
channel(s) you want to use, use the remote...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 3 
Digimedia Handheld instructions: 
 
    
 
DO NOT LOSE THE REMOTE!                      portable handheld                   new DIFFERENT 2008 version 
 
QUICK START 
1. Install battery. Also mount antenna; use the black one to start. 
2. Turn on LCD. Go into Menu and select CHANNEL SEARCH. This will help you 
find out what channels are being used and which are usable. Find a clear\
 
channel (one with solid snow – no semi-picture). You can later use \
the...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 4 
 
1 7” LCD MONITOR MOUNT WARNING! 
¼-20 mounting bolt must not exceed ¼”  total depth into the unit!  Using a longer bolt will damage the 
LCD and void the warranty. 
 
MUTE AUDIO with remote after each power up/down. Or keep a dummy plug inserted in the Headphone 
jack. 
 
Battery protection: 
This monitor will not damage the NP-1 battery by over discharge. The battery protector (the 
lump on back) will shut down the monitor before the battery is killed. \...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 5 
 
USE “AUTOSCAN” TO FIND BROADCAST CHANNELS  
If you want to broadcast outside the US, you must not use the broadcast channels that have active TV 
stations on them. This procedure will help you to make a list of the “non-use” channels. 
 
1. Insert NP-1 Battery into 7” Monitor. Note red LED in front and green LED in back. 
 
2. Press POWER on 7” Monitor. Note Screen lights up, LED in front turns green. 
  
3. Press TV/AV until you see: 
TV 
## 
 
 
 
 
The...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 6 
 
 9. Use the Remote Control to enter channel numbers you will use for Modulus. These are the 
channels that were not stored in memory during “AUTOSCAN”. These should be open/unused 
channels. If possible, use a channel that is two numbers away from an in-use broadcast channel.  
ADD AND DELETE CHANNELS  
1. Power up monitor. Note red LED in front and green LED in back. 
2. Press POWER. Note Screen lights up, front LED turns green. 
  
3. Press TV/AV until...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 7 
Set Modulus to selected open channel (non USA use!) 
1. Note the channel number you have selected. Write it down. Set the indicator dials on the 
Modulus to the selected channel. The selected channel must be from channels 14-69 only. NO 
OTHER CHANNELS WILL WORK. 
 
    set to channel 14 as sample 
 
2. Attach proper Antenna to Modulus OUTPUT. There is a choice of 3 depending on frequency. 
  8 antenna best for channels 50-69 
10 antenna best for channels...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 8 
 
To receive Mini Spy: with good Lemo and BNC connectors mounted on box. Size: 3” x 2” \
x 
7/8” thick. Metal box version needs custom cables with 4 pin Lemo ( \
extra 
charge). It is protected against reverse voltage and overvoltage. 2 versions: 8V-
14V or 9-36V with internal DC-DC.  
Range:  90 yards with small whip on receiving Watchman.  With flat panel\
 gain 
Rx Antenna: 350 yards 
Power:  with LED indicator, reverse voltage protected, Current 160mA,...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 9 
11. You may delete all unwanted channels, but you must have at least two channels added or 
monitor will reset to default scan mode. In default scan mode all channe\
ls may be selected using 
the CH/ADJ  S  T buttons. 
For better reception and fine tuning: 
Set FREERUN to OFF for better weak signal reception:  
1. Plug Power source into monitor. Note red LED in front. 
2. Press POWER. Note Screen lights up. 
 
3. Press TV/AV until you see: 
TV 
##...

Monitor 7” LCD Manual Haier + DIGIMEDIA Page 10 
MENU OPTIONS (press menu once) 
PICTURE FUNCTION  
1. Press MENU to select PICTURE menu. 
2. Press SEL to select sub-item. 
PICTURE 
XBRIGHT 
CONTRAST 
COLOR 
TINT 
SCREEN    16:9 (or 4:3) 
 
RESET 
Note: RESET returns all values to factory default settings. 
3. Press CH/ADJ  S  T to adjust level of selected sub-item. 
 
OTHER OPTIONS 
For standard broadcast reception press TV/AV to TV mode. 
For cable TV reception press TV/AV to CATV mode. Use IRC. 
For...