GoPro Omni User Manual

1USER MANUAL 

The Basics4
Getting Started 8
Camera Status Screen 16
Camera Menus 17
Camera Modes 20
Navigating Settings Menus 21
Video Mode 22
Photo Mode 25
Multi-Shot Mode 26
Setup Mode 31
Protune 34
Transferring Files to a Computer 38
Omni Files and GoPro Software 39
Smart Remote 40
Battery 41
Important Messages 44
Troubleshooting 46
Customer Support 48
Trademarks 48
Regulatory Information 48
TABLE OF CONTENTS 

45
1. Inner Cube (Synchronizer)
2.  Frame (6x Outer Panels)
3.  Camera Position Indicator (1-6)
4.  Mounting Corner   
(1/4-20 Threaded Insert, 1x Top   
under removable Corner Cap,   
1x Bottom) 5. 
Power Connector   
(2.5mm x 5.5mm)
6.  HEROBus Connector (30-pin) 
7.  Array Camera Status Light
THE BASICSTHE BASICS
6
5
4
73
1
2 

67
THE BASICSTHE BASICS
678
9
3
1. Camera Status Light (red)
2.  Shutter/Select Button [  ]
3.  Wireless Status Light (blue)
4.  Camera Status Screen
5.  Power/Mode Button [ 
 ]
6.  Micro HDMI Port   
(cable not included) 7. 
microSD Card Slot 
8.  Mini-USB Port  
(supports composite A/V 
cable/3.5mm stereo mic 
adapter,   
not included)
9.  Audio Alert 10. 
Microphone
11.  HEROPort 
12.  Settings/Tag Button [ 
 ]
13.  Battery Door
14
21
5
9
1
11
12
13 

89
MEMORY CARDS 
HERO4 Black requires a microSD, microSDHC, or microSDXC memory 
card. The card must have a minimum rating of Class 10 or UHS-I, and a 
capacity of 32GB or 64GB. For a list of SD cards recommended for use 
with Omni, visit the Omni Support Hub at gopro.com/help .
 
NOTICE:  Use care when handling memory cards. Avoid liquids, dust 
and debris. As a precaution, power off the camera before inserting or 
removing the card. Check manufacturer guidelines regarding use in 
acceptable temperature...

1011
GETTING STARTEDGETTING STARTED
ASSEMBLING THE ARRAY
Installing the Cameras 
The All Inclusive Omni package ships with the cameras already installed. 
If you want to re-install a camera or if you have the Rig Only version of 
Omni, follow the steps below.
1.  Confirm that all cameras are HERO4 Black cameras. Other GoPros are 
not supported. 
2.  Confirm that all cameras are using the same version of array firmware. 
To obtain the latest array firmware for Omni, visit gopro.com/help  
and log in to...

1213
GETTING STARTEDGETTING STARTED
e. Tighten the screws in a star pattern.
4.  Tighten the screws for the panel.
5.  Repeat steps 3-6 for the remaining cameras.
SUPPLYING POWER TO THE RIG  
You have two options for powering the rig: external power or the   
camera batteries. 
NOTICE:  Do not switch from one power source to another (camera 
batteries to external power or external power to camera batteries) 
without first powering off the cameras. Failure to follow this guideline can 
lead to unexpected...

1415
GETTING STARTEDGETTING STARTED
WARNING: Use caution when using your GoPro as part of your 
active lifestyle. Always be aware of your surroundings to avoid 
injury to yourself and others. 
Abide by all local laws when using your GoPro and related mounts 
and accessories, including all privacy laws, which may restrict 
recording in certain areas.
MOUNTING OMNI
1.  If you want to use the top 1/4-20 threaded insert, unscrew the   
corner cap.
2.  Use a 1/4”-20 screw with the threaded insert on the top...

1617
Your HERO4 Black features a status screen that displays the following 
information:
1.  Camera Mode/FOV   
(field of view)
2.  Resolution/fps   
(frames per second)
3.  Protune™ (if on)
4.  Number of Files Captured
5.  Available Time on Memory Card
6.  Wireless (if on)
7.  Battery Life
CAMERA STATUS SCREEN
Beeps
Burst
Color
Date/Time
Delete
Exposure Value 
Compensation
Field of View
Frames Per Second
Interval
ISO Limit
LEDs
Megapixels
Multi-Shot Mode
Night Lapse
Photo
Protune
Rate
RESET  CAM Reset...

1819
CAMERA MENUSCAMERA MENUS